Joe Bower <jnbower1@...>
I use a wire coat hanger, the type that has the horizontal paper tube.
Bend the Hook into a closed loop for the handle.
Pull the two wire ends out of the tube, and cut off about 5" of the wire.
File the ends to a smooth, rounded tip and slightly tapered so the tips can
slip into the Truck screw holes in the bolsters. Bend these arms to form a
"U" pointing up away from the handle, and equal to the span between the
bolsters on the car to be painted. (Make several "Holders", bent to fit the
spans of different length models)
If the legs of the "U" are separated by slightly more, or less than bolster
centers, the spring force should hold the models satisfactorily.
From: STMFC@... [mailto:STMFC@...] On Behalf Of
Sent: Saturday, May 25, 2013 7:27 PM
Subject: [STMFC] Airbrushing Resin Kits
While the spring loaded "expander" handle works fine for car bodies with
removable shells, what does one use to hold assembled Westerfield and
Sunshine models for spray-painting? Any tips?