Re: D&RGW coal train, which cars appropriate?

vapeurchapelon
 

Hello friends,
 
lots of thanks for your input!
 
Richard, afaik the bonsallscalecarshops model is exactly the same type car I already have from W&R.
 
Many thanks Tim for your comment on the composite sides gon! Some hours ago I compared one of my Red Caboose models with the Precision Scale Brass model linked yesterday - and (to me) they are virtually identical. :-)
 
Garth, many thanks for your input! Seems that I should try to find a photo of one of the Pressed Steel Car Co. 46000-46499 40-foot, 10-inch GS gondolas, maybe these are (almost) similar to the linked UP and SP steel side gons?
 
Did D&RGW not have USRA composite side gondolas?
 
Thanks again and greetings
 
Johannes
 
Gesendet: Samstag, 09. Februar 2019 um 23:33 Uhr
Von: "Richard Townsend via Groups.Io" <richtownsend@...>
An: main@RealSTMFC.groups.io
Betreff: Re: [RealSTMFC] D&RGW coal train, which cars appropriate?
 
It's too bad you have to have brass, because the 3D printed gondolas from bonsallscalecarshops on eBay otherwise fit your D&RGW train.
 
Richard Townsend
Lincoln City, OR
 
-----Original Message-----
From: vapeurchapelon <j.markwart@...>
To: main <main@RealSTMFC.groups.io>
Sent: Sat, Feb 9, 2019 1:28 pm
Subject: [RealSTMFC] D&RGW coal train, which cars appropriate?

 
Hello friends,

please allow another dumb question from a freight car newbie. Part of my "mixed freight" is a cut of D&RGW drop bottom coal gondolas, up to date 13 of the 47' type offered by W&R several years ago. I am assuming that just this one car type would be very unlikely to see and therefore I am looking for other cars to add variety. But I don't know enough to decide which available cars can be credibly painted D&RGW. I recall a posting on this group several months ago that most or all D&RGW's gondolas were special in several details and proportions.

The following drop bottom type gondolas are available (in brass, which is mandatory for me for this train):

USRA composite side drop bottom:
https://www.brasstrains.com/BrassGuide/PDG/Detail/19532

GS composite side:
https://www.brasstrains.com/BrassGuide/PDG/Detail/43214

UP G 50-7:
https://www.brasstrains.com/BrassGuide/Pdg/Detail/19484/HO-Rolling-Stock-Challenger-Imports-LTD-2250-1-Union-Pacific-GONDOLA

https://www.brasstrains.com/BrassGuide/Pdg/Detail/19485/HO-Rolling-Stock-Challenger-Imports-LTD-2251-1-Union-Pacific-GONDOLA

SP G 50-9:
https://www.brasstrains.com/BrassGuide/Pdg/Detail/19360/HO-Rolling-Stock-Challenger-Imports-LTD-2096-1-Southern-Pacific-GONDOLA

SP G 50-12:
https://www.brasstrains.com/BrassGuide/Pdg/Detail/19366/HO-Rolling-Stock-Challenger-Imports-LTD-2249-1-Southern-Pacific-GONDOLA

Is there any model in this list which I can use to make a D&RGW car? And what would be the major changes to do?
Yes I did try to search information, but did not find anything definite. Red Caboose once offered both a wood side GS and a steel side GS gondola lettered D&RGW - but I just don't know if these were correct considering the fact that most all manufacturers were/ are offering "foobies".

I found this photo:
http://www.railgoat.railfan.net/other_cars/drgw_cars/drgw_number/072000-073699.htm

Described here as a 46' type, but if you use "Back to D&RGW Freight Cars Page" you will find it listed as a 40' car (scroll down to the end of the list) - what is correct? To me it looks very similar (please excuse me) to the UP or SP models offered by Challenger.

I would appreciate any kind of help.

Many greetings

Johannes
Modeling the early post-war years up to about 1953

Join main@RealSTMFC.groups.io to automatically receive all group messages.