Re: WP conversion


WILLIAM PARDIE
 

What a relief!  With all the discussion about the roof on these cars I was pleased to find when I got home today that Andy got the roof right in his kit.
The plan in the March 1990 Mainline Modeler also featured the correct roof..

Bill Pardie


Sent from my Verizon, Samsung Galaxy smartphone

-------- Original message --------
From: "Paul Doggett via Groups.Io" <paul.doggett2472@...>
Date: 12/9/19 12:54 AM (GMT-10:00)
To: main@realstmfc.groups.io
Subject: Re: [RealSTMFC] WP conversion

Cheers Garth 

I am sanding the roof down it will have to do as a stand in as there’s nothing else available as far as I know.
Paul Doggett. England 🏴󠁧󠁢󠁥󠁮󠁧󠁿 


On 9 Dec 2019, at 10:36, Garth Groff and Sally Sanford <mallardlodge1000@...> wrote:


Friends,

While I am loath to argue with Tony about this, I find no evidence or mention of roof replacements to the WP 15001-series boxcars. I have copies of several of the general arrangement diagrams for cars in this series, including the 26001-series in plaster service, 8051-8055 (the last in general service circa 1947, see below), the 75001-series stock cars (which had "single-board" roofs, suggesting the original steel claddding was removed), various cars converted to MW service, and numerous photos in my collection and in several WP books. None offer any indication for roof conversions except the stock cars. I can't say it didn't happen, but I will remain unconvinced until somebody finds photographic or documentary evidence.

The 8051-8055 group should be of particular interest to Fred. The general arrangement drawing was reworked 3-28-47 (only the car numbers were changed). These were apparently the last five such cars in general service, if indeed they actually were still in use. I have the WP July 1949 ORER sheets, and these cars are gone from the roster, as are all the 15001-cars. The 8051 series apparently had a very short life with those numbers.

I suggest the Accurail roof should be sanded smooth and Archer seams added. The car is way too tall to be even a good stand-in (they had just an 8-foot IH, and were 12' 10" and change at the roof peak), which was why I disposed of my examples long ago. 

Yours Aye,

Garth Groff 🦆


On Sun, Dec 8, 2019 at 9:17 PM Rich C via Groups.Io <rhcdmc=yahoo.com@groups.io> wrote:
It will look great when you give it The Doggett Weathering magic

On Saturday, December 7, 2019, 07:48:23 AM CST, Paul Doggett via Groups.Io <paul.doggett2472=icloud.com@groups.io> wrote:


Hi guys

The Accurail conversion is ready for painting and decals for WP I have left the original roof as Tony Thompson reckons some got steel roofs at some stage. The kit bashing is not perfect as I reckon it’s slightly to high but will be a reasonable stand in.


Paul Doggett.  England 🏴󠁧󠁢󠁥󠁮󠁧󠁿


Join main@RealSTMFC.groups.io to automatically receive all group messages.