Re: What’s on my work bench

Paul Doggett


Thank you I could not find a brass one so I decided to build one instead a lot cheaper as well.

Paul Doggett

On 17 Aug 2020, at 17:29, Nelson Moyer <npmoyer@...> wrote:

It's interesting to see a tender mod, even if it's not a freight car. Nice work, Paul.

Nelson Moyer

-----Original Message-----
From: [] On Behalf Of Paul Doggett via
Sent: Monday, August 17, 2020 9:01 AM
Subject: [RealSTMFC] What’s on my work bench

Not a freight car but a kit bashed tender for any of the following SP locos 2-6-0, 4-6-0, 2-8-0 or 4-8-0. Started with a Bachmann tender frame which matched the SP 0-8-0 tender that I have Brian Moore donated the tank which I cut down the body on and filled all the holes with 0.025” styrene. The oil tank was made with 0.020” styrene, the water filler was made with a piece of 0.040” styrene. The water and oil tanks had Archer rivets fitted unfortunately I didn’t take a photo of them, it’s not perfect but I am pleased with it. I hope this is ok for here. Remove if not permitted.

Paul Doggett England 🏴󠁧󠁢󠁥󠁮󠁧󠁿

Join to automatically receive all group messages.