Re: Vallejo paint
A while back there was a modeling article on the 10 best tools for modeling. One of the ten was the small battery operated mixer from Microsoft Mark.
Right they were. It is one of my most used tools..I keep several at the ready.
Incidents another forgotten item for mixing paint is an ultrasonic cleaner.
Sent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------
From: Nelson Moyer <npmoyer@...>
Date: 3/25/21 12:59 PM (GMT-10:00)
Subject: Re: [RealSTMFC] Vallejo paint
Good advice from an avid Vallejo user. However, I will occasionally mix paint with thinner in the cup for small paint jobs, but only with lacquers or enamels, never acrylics. I put the thinner into the cup first, so I know exactly how much I have, then add the paint to achieve approximately 3 parts paint and one part thinner. I use the tip of the plastic disposable pipette to stir and mix by aspiration a few times. Works just fine.
From: main@RealSTMFC.groups.io [mailto:main@RealSTMFC.groups.io]
On Behalf Of Lester Breuer
Clark never mix in the paint cup as paint goes around needle and that does not mix well with paint and thinner added above. Always mix in another container - I use a large measuring spoon. There are two Vallejo paint types: Model Air
ready for spraying which I find rare ( I have spayed only a few times with paint directly from the bottle) and Model Color for brushing that always must be thinned. Before any thinning I remove eye dropper bottle top which does come out of bottle and stir
paint inside bottle and reinsert eyedropper top. thinning: I mix all paint for the airbrush in a large measuring spoon. Normally 30 to 40 drops of paint. The beauty of the eye drop top. Thinner: Model Air due to bottle sitting on shelf for a period of
time may need to be thinned when opened so start with maybe 10 drops of thinner and work up 5 drops at a time. You should have a milk viscosity for spraying. I use a piece of rail to stir the paint and thinner in the measuring spoon. If I turn the rail after
stirring vertical and the paint on the rail forms a drop and drips off paint is ready. For Model Color I start with the same number of 30 to 40 drops of paint. I start with half the number of drops, 15 or 20 of thinner and work up - again five drops at a
time. Again, when drop falls off rail used for mixing thinned paint ready for spraying. On Model Color at times I will need and work up to the same amount of drops, 30 to 40 to get viscosity of thinner and paint correct. Sounds like a lot of tedious time
spent mixing; however, soon second nature and you will be able to mix at light speed as you building speed.