Re: Brass Steam Locomotives that Pull Freight Cars.


Paul Doggett
 

Steve

Hopefully i will see Eileen’s at a show this year a get some phosphor bronze.

Cheers Paul

On 27 May 2022, at 22:57, Nolan Hinshaw <nualain48@...> wrote:

On May 26, 2022, at 12:30, steve_wintner via groups.io <steve_wintner@...> wrote:

I was unaware of that Charlie. There are any number of Brits discussing how to size continuous springs, usually under the term CSB (continuous springy beam)

http://www.clag.org.uk/beam-annex3.html

Sprung Hornblocks (aka axleboxes) have their proponents as well. The springs have to be carefully sized though, not too stiff. Paul, Eileen's and Alan Gibson in the UK may offer something suitable?
Whenever this subject rears its head above the noise level[0] I remember reading and photocopying one or more articles in Model Railroader [pre-1979] discussing fully equalizing a locomotive (in HO scale) rather than individually springing the driving axles, this in concert with balancing the locomotive fore-and-aft. This was reasonably near the time Bob Darwin produced his Art of Superdetailing series.

[0] intentional mixing of metaphors for the fun of it
--
Willie was a chemist,
Now Willie is no more.
What Willie thought was H2O
Was H2SO4





Join main@RealSTMFC.groups.io to automatically receive all group messages.