--- In STMFC@..., "Mike Brock" <brockm@...> wrote:

Tim O'Connor says:

Mike, .031 + .047 = .078 not .088. You want to remeasure?

Nah. As I mentioned, I cannot measure the point where the flange and

tread

meet any more accurately than about 1/128. [ +/- 0.0078 ] Same for

the Code

110 wheel. .101 + .0078 =0.1088. Well within the ball park.

Mike Brock

So... Mike wants to quibble over .002" on the depth of the flange and
.005" on its width, but can't measure closer than +/- .0078????

Dennis