Re: ORER Help -- CV blister side hoppers


armprem
 

Gentlemen,My October 1949 OER shows a split of 110 1650 cu ft to 85 1769 cu ft. Armand Premo

----- Original Message -----
From: "Richard Dermody" <ddermody@...>
To: <STMFC@...>
Sent: Sunday, September 23, 2007 10:18 AM
Subject: Re: [STMFC] ORER Help -- CV blister side hoppers


Marty,

The July 1947 ORER paints a little bit different picture.

It lists two lines for CV hoppers;

Line 4 is Hopper, Twin, Steel panel sides, series 20000 to 20199, cu
ft 1769, 185 cars.

Line 5 is Hopper, Steel, Twin, series 20000 to 20199, cu ft 1680, 10
cars.

Note B to the hoppers is as follows:

Note B - Individual numbers of cars in series 20000 to 20199 equipped
with straight sides and differing in cubical capacity from other cars
in same series; capacity 1,680 cu. ft.: 20031 20077 20078 20094 20109
20115 20136 20145 20179 20191.

So it seems that in 1947, the majority (185) of the hoppers were
panel (blister) side while 10 were straight side, but by your 1951
ORER the numbers had essentially reversed so only 10 cars remained
with panel sides.

Dick

On Sep 23, 2007, at 8:42 AM, Martin McGuirk wrote:

I'm trying to pull together some details on the Central Vermont's
twin hoppers for a clinic I'm presenting at the CV Historical
Society. I know a number (100) of these cars got blister side panels
installed in the mid-to late 1930s -- what I don't know is if the
ORER listing for the the late 1930s and early 1940s list the cars by
number. Ideally I'd like to find a list of the cars numbers converted
-- these would show up in the ORER with a 1,769 cu. ft. capacity.
The ORERs I have in my collection either pre-date or postdate these
cars. (By 1951 all but 10 had been converted back to flat panel
sides. Can anyone help out -- perhaps scan the CV pages from an ORER?

Thanks in advance,

Marty




Yahoo! Groups Links






Yahoo! Groups Links


Join main@RealSTMFC.groups.io to automatically receive all group messages.