Date   

Re: Looking for builder's photo of PS-1, NH 35149

Bryan Busséy
 

Ed,

Since I don't have that volume, I must have it in reprint form such as
the Train Shed Cyclopedia or Railway Prototype Cyclopedia. Thanks for
the info.

bb

On 5/31/2011 2:20 PM, Ed Hawkins wrote:


On May 31, 2011, at 12:40 PM, Bryan Busséy wrote:

I'm looking for the builder's photo of a PS-1 boxcar, New Haven
#35149.
The car is freight car red and has a black seven-foot Superior door. I
know the photo has been featured in at least one book or periodical
because I've seen it on numerous occasions, but I can't remember which
one. If someone would enlighten me, I would be appreciative. Thanks.
Bryan,
A builder's photo appeared on page 98 of the 1949/51 Car Builders'
Cyclopedia.
Regards,
Ed Hawkins




[Non-text portions of this message have been removed]


Re: Looking for builder's photo of PS-1, NH 35149

Bryan Busséy
 

Dave,

That's where I remember seeing it. Many thanks.

bb

On 5/31/2011 3:00 PM, ealabhan0 wrote:

--- In STMFC@yahoogroups.com <mailto:STMFC%40yahoogroups.com>, Bryan
Busséy wrote: I'm looking for the builder's photo of a PS-1 boxcar,
New Haven #35149. The car is freight car red and has a black
seven-foot Superior door. I know the photo has been featured in at
least one book or periodical because I've seen it on numerous
occasions, but I can't remember which one. If someone would enlighten
me, I would be appreciative. Thanks. bb

Bryan, that 4-28-48 builder's photo appears on page 8 of Robert A.
Liljestrand's book, "Rolling Stock of New England Volume 2, New Haven
Railroad Freight Equipment." It's a rather dark print of this low
height (10ft0in IH) early PS-1. Other photos of boxcars in NH
34500-35999 series on pages 4, 9 & 13 show more clearly that the
7-panel Superior door on this series has a narrow top panel, another
indicator of a low IH boxcar. Interestingly, NH had previously
purchased 20 40ft PS-1s with the more common 10ft6in IH in 1947, NH
34001-34020; these were equipped with Evans "Damage Free" loaders and
had 7-panel Superior doors with equal-size panels as normal for
full-height boxcars of the time.
Hope this helps, Dave Sieber, Reno NV


[Non-text portions of this message have been removed]


Re: Styrene cements

Barkeep <Kjb80401@...>
 

For 30 years now, I have been using a product recommended by a professional modeler friend of mine. It's available at:
"IPS Weld-On Cements" http://www.ipscorp.com/assembly/acrylic

I recommend their No.3 but No. 4 works just as well.

Keevan kjb80401@aol.com

--- In STMFC@yahoogroups.com, Craig Zeni <clzeni@...> wrote:

For many years I have been a fan of the now-unavailable Kibri product
that Walthers sold. It was faster than Testors and slower than
Tenax. Big bottle, big opening, long shelf life. It was also very
effective at melting paint...which was good as it often saved me the
step of scraping paint at joints. I've also used the Ambroid
product, finding it behaves a lot like the Kibri.


Re: Looking for builder's photo of PS-1, NH 35149

David Sieber
 

--- In STMFC@yahoogroups.com, Bryan Busséy wrote: I'm looking for the builder's photo of a PS-1 boxcar, New Haven #35149. The car is freight car red and has a black seven-foot Superior door. I know the photo has been featured in at least one book or periodical because I've seen it on numerous occasions, but I can't remember which one. If someone would enlighten me, I would be appreciative. Thanks. bb

Bryan, that 4-28-48 builder's photo appears on page 8 of Robert A. Liljestrand's book, "Rolling Stock of New England Volume 2, New Haven Railroad Freight Equipment." It's a rather dark print of this low height (10ft0in IH) early PS-1. Other photos of boxcars in NH 34500-35999 series on pages 4, 9 & 13 show more clearly that the 7-panel Superior door on this series has a narrow top panel, another indicator of a low IH boxcar. Interestingly, NH had previously purchased 20 40ft PS-1s with the more common 10ft6in IH in 1947, NH 34001-34020; these were equipped with Evans "Damage Free" loaders and had 7-panel Superior doors with equal-size panels as normal for full-height boxcars of the time.
Hope this helps, Dave Sieber, Reno NV


Re: Looking for builder's photo of PS-1, NH 35149

Ed Hawkins
 

On May 31, 2011, at 12:40 PM, Bryan Busséy wrote:

I'm looking for the builder's photo of a PS-1 boxcar, New Haven
#35149.
The car is freight car red and has a black seven-foot Superior door. I
know the photo has been featured in at least one book or periodical
because I've seen it on numerous occasions, but I can't remember which
one. If someone would enlighten me, I would be appreciative. Thanks.
Bryan,
A builder's photo appeared on page 98 of the 1949/51 Car Builders'
Cyclopedia.
Regards,
Ed Hawkins


Looking for builder's photo of PS-1, NH 35149

Bryan Busséy
 

Folks,

I'm looking for the builder's photo of a PS-1 boxcar, New Haven #35149.
The car is freight car red and has a black seven-foot Superior door. I
know the photo has been featured in at least one book or periodical
because I've seen it on numerous occasions, but I can't remember which
one. If someone would enlighten me, I would be appreciative. Thanks.

bb


Re: Pre-30s Geo Survey Topo Map of Clifton Forge and Covington area

water.kresse@...
 

Thanks to many who have provided me with three or four more sources over and above MyTopo.com.



Al Kresse, currently with the MOS of "Garden Slave and Dog Washer"

----- Original Message -----
From: "Eric" <eric@hansmanns.org>
To: STMFC@yahoogroups.com
Sent: Tuesday, May 31, 2011 8:50:37 AM
Subject: [STMFC] Re: Pre-30s Geo Survey Topo Map of Clifton Forge and Covington area

Al,

Have you tried the Virginia Department of Mines?
http://www.dmme.virginia.gov/divisionmineralresources.shtml

Several years ago I needed an old topo of the Elkins, West Virginia area. I called the West Virginia Geological Survey and obtained a reprint of an early 1920s topo that fit my needs. Just thought there should be something similar in East Virginia.

Eric



Eric Hansmann
Chagrin Falls, Ohio
Modeling the railroads of Newburgh, Ohio, circa 1926:
http://designbuildop.hansmanns.org/





--- In STMFC@yahoogroups.com, "al.kresse" <water.kresse@...> wrote:

I'm looking for a pre-CCC projects Geo Survey Topo maps of the Backbone-Covington-Potts Creek - Rich Patch-Clifton Forge, Virginia area before all the work projects turned old railroad roadbeds into local roads or fire trails.  That whole area should be a maze of mine or furnace trackbeds. Blast furnaces closed in the teens and twenties, but their iron ore mines stayed open longer.

The quadrant should break right around Low Moor between Covington and Clifton Forge.  WE have an 1894 topo map of Clifton Forge east almost to Goshen and down to Glenn Wilton.

Thanks,

Al Kresse


ADMIN: Messages Associated With Commercial Selling

mike brock <brockm@...>
 

This is a good time to mention that the STMFC rule regarding messages associated with the selling of items as part of a commercial activity is:

"Messages regarding the selling of products as part of a commercial
enterprise must be sent during the period of noon Friday EST and Saturday
midnight EST.
Each seller is allowed one message unless a correction is needed. Seller
messages MUST include OFF GROUP addresses for replies. Replies by members to seller messages MUST be OFF GROUP.

I might also note that all messages to the STMFC require signing with your first AND last name.

Thanks.

Mike Brock
STMFC Owner


FS: New Products from Mount Vernon Shops

John S. Frantz
 

To Whom It May Concern:

 

Mount Vernon Shops is happy to announce the introduction of
two new products this week to its line.

 

1. HO Scale PRR GLc and GLca decals. These are for cars done
in the PRR’s Circle Keystone Scheme. There is enough data to do six cars on the
set. It includes 6 different re-weigh locations on the PRR System and also the “Coal
Goes to War” Monogram for 3 cars as well.

 

For more information follow this link: http://www.mountvernonshops.com/GLC.html

 

2. HO Scale LCL Bulk Merchandise Containers. These are being
produced in a limited run for me. These are one-piece cast urethane bodies and
only require paint and lettering and they’ll be ready to include as a Gondola
load. They’re being sold in packs of 10 with decals for the following roads:
B&O, DL&W, ERIE,
NYC, RDG and PRR. The expected delivery of these to me is Mid-Summer of this
year. For anyone that pre-orders at lest one pack with me prior to arrival of
them they will get free shipping.

 

For more information, follow this link: http://www.mountvernonshops.com/C1.html

 

If anyone has any questions regarding the above products or
any others listed on my website please contact me at the following email: jfrantz@mountvernonshops.com

 

Thank You and Best Regards,

John Frantz

 

Owner,

Mount Vernon Shops

York, PA

www.mountvernonshops.com

 

Specializing in
products for the Prototype Modeler!


Re: Pre-30s Geo Survey Topo Map of Clifton Forge and Covington area

Eric Hansmann
 

Al,

Have you tried the Virginia Department of Mines?
http://www.dmme.virginia.gov/divisionmineralresources.shtml

Several years ago I needed an old topo of the Elkins, West Virginia area. I called the West Virginia Geological Survey and obtained a reprint of an early 1920s topo that fit my needs. Just thought there should be something similar in East Virginia.

Eric



Eric Hansmann
Chagrin Falls, Ohio
Modeling the railroads of Newburgh, Ohio, circa 1926:
http://designbuildop.hansmanns.org/

--- In STMFC@yahoogroups.com, "al.kresse" <water.kresse@...> wrote:

I'm looking for a pre-CCC projects Geo Survey Topo maps of the Backbone-Covington-Potts Creek - Rich Patch-Clifton Forge, Virginia area before all the work projects turned old railroad roadbeds into local roads or fire trails. That whole area should be a maze of mine or furnace trackbeds. Blast furnaces closed in the teens and twenties, but their iron ore mines stayed open longer.

The quadrant should break right around Low Moor between Covington and Clifton Forge. WE have an 1894 topo map of Clifton Forge east almost to Goshen and down to Glenn Wilton.

Thanks,

Al Kresse


Re: Why not model actual train consists? (UNCLASSIFIED)

Gatwood, Elden J SAD
 

Classification: UNCLASSIFIED
Caveats: NONE

Maybe I am missing something based on what they did where I lived, but:

The guys I knew at Conway included guys whose job it was to look for the cars
in the yard (MTY) that suited the need of local industries. They were always
looking for: a) gons in good condition, b) 50-foot box cars in good
condition, c) 65-foot gons, d) covered gons, e) hoppers in good condition,
and f) certain types of flat cars, in that order, if I remember right.

The cars were assembled in blocks to serve groups of industries along certain
portions of the line.

A switch list was prepared, with the reporting marks and car number noted for
reach car, except for big strings of hoppers, for unit train usage.

If your local yard assembled a bunch of cars to go to local grain elevators,
by looking through what they had, and making calls for what they needed, then
creating that block for delivery, with a switch list for the crew of the
local, why would they not know where the cars were going?

Elden Gatwood

-----Original Message-----
From: STMFC@yahoogroups.com [mailto:STMFC@yahoogroups.com] On Behalf Of Aley,
Jeff A
Sent: Thursday, May 26, 2011 2:44 PM
To: STMFC@yahoogroups.com
Subject: RE: [STMFC] Re: Why not model actual train consists?



Sorry, I didn't trim Tony's msg, so my question was unclear. I am referring
specifically to the assertion that, "the crew on a local could look down the
train (or the switchlist) and be pretty sure where EVERY car was going."

--

I honestly don't understand. Let's say there's a PRR X29 that arrives on a
small SP branch, or at a small town in Iowa.
How would the local crew [on the prototype] know where it is going?

I can understand that you can do that with open loads, or with private cars,
or cars in leased fleets, but free-running box cars (like a MILW rib-side)??
How would they know?

Regards,

-Jeff







Classification: UNCLASSIFIED
Caveats: NONE


Re: covered gondola help

Jon Miller <atsf@...>
 

On 5/30/2011 7:30 PM, Anthony Thompson wrote:
All
across the early Athearn line, you see "shorty" versions of rolling
stock (not all of which fitted in the same box). That's what I think
was going on.
At the time of the majority of the Blue Box kits I think 15 and 18
inch snap track was very common and I'm sure the cars were designed for
that. I really hate to admit this but my very first HO layout was on a
sheet of 4 x 8 plywood with 15 and 18 inch snap track and I think a
couple of #4 switches. We have come a long ways!

--
Jon Miller
For me time stopped in 1941
Digitrax--Chief/Zephyr systems, JMRI User
NMRA Life member #2623
Member SFRH&MS


Re: covered gondola help

Kurt Laughlin <fleeta@...>
 

----- Original Message -----
From: Anthony Thompson

Greg Martin wrote:
. . . these are BOX SCALE... Just like the flat car, whatever it
took to fit in the little blue box.
Not to pick on Greg, but I think this "box scale" story is an
urban legend. Athearn had several other box sizes for passenger cars
and locomotives, and to maintain that they HAD to fit everything into
a single box is silly. Greg, ever notice the Athearn mechanical
reefers? Sure don't fit in the 40-ft. car box.
But I do think they wanted to keep cars short for those with
18-inch or less curves, sometimes called the "toy train folks." All
across the early Athearn line, you see "shorty" versions of rolling
stock (not all of which fitted in the same box). That's what I think
was going on.

----- Original Message -----

Plus, the cars are to my knowledge the correct (or at least standard for the
type) height and width, so they can't be shortened and be scale at all.

"Box scale" was very common in the 50s and 60s for aircraft and ship models,
leading to the ever popular 1/54, 1/78, 1/131, and 1/509 scales (among
others). It has not been determined if they were sized to fit standard
boxes or standard injection molding machines, though.

KL


Re: covered gondola help

Anthony Thompson <thompson@...>
 

Greg Martin wrote:
. . . these are BOX SCALE... Just like the flat car, whatever it took to fit in the little blue box.
Not to pick on Greg, but I think this "box scale" story is an urban legend. Athearn had several other box sizes for passenger cars and locomotives, and to maintain that they HAD to fit everything into a single box is silly. Greg, ever notice the Athearn mechanical reefers? Sure don't fit in the 40-ft. car box.
But I do think they wanted to keep cars short for those with 18-inch or less curves, sometimes called the "toy train folks." All across the early Athearn line, you see "shorty" versions of rolling stock (not all of which fitted in the same box). That's what I think was going on.

Tony Thompson Editor, Signature Press, Berkeley, CA
2906 Forest Ave., Berkeley, CA 94705 www.signaturepress.com
(510) 540-6538; fax, (510) 540-1937; e-mail, thompson@signaturepress.com
Publishers of books on railroad history


Re: Styrene cements

Jon Miller <atsf@...>
 

On 5/30/2011 1:35 PM, Matthew wrote:
I had an "in" with a pharma supplier in Upstate NY, that allowed me to obtain reagent grade MEK by the gallon.
Regular grade is available in most hardware stores as well as Lowes
and Home Depot. I also only use it as styrene glue.

--
Jon Miller
For me time stopped in 1941
Digitrax--Chief/Zephyr systems, JMRI User
NMRA Life member #2623
Member SFRH&MS


Re: Pre-30s Geo Survey Topo Map of Clifton Forge and Covington area

David
 

--- In STMFC@yahoogroups.com, "al.kresse" <water.kresse@...> wrote:

I'm looking for a pre-CCC projects Geo Survey Topo maps of the Backbone-Covington-Potts Creek - Rich Patch-Clifton Forge, Virginia area before all the work projects turned old railroad roadbeds into local roads or fire trails.
IIRC, I found some 1920-era topos on this site a while back.

http://data.geocomm.com/catalog/US/61079/1516/group4-3.html

David Thompson


Re: Styrene cements

Chuck Soule
 

Jared Harper wrote:

I am surprised no one has mentioned MEK. That's all I have been using for years to join styrene. It works great!
If the label doesn't say MEK, it might list 2-butanone. Same stuff.

Chuck Soule


Re: Hub City Museum rolling stock - photos

Brian <cornbeltroute@...>
 

I returned to Oelwein, Iowa -- CGW's Hub City -- today and took photos and made measurement of the M&StL bulkhead flat toolbox. If any of this would be of use to you (or anyone else here), let me know. (Manufactured 1959, just slips in the door here.)

BTW, the tool box is two separate boxes but welded to the car in such a way to look like one.

-Brian Chapman
Evansdale, Iowa

Yep, GSC flats with 6'6" bulkheads. I have a 1981 shot of 16229 still in its bright red paint and Roman road name lettering. The cars were series 16201-16229, odd numbers only. <
If you have a shot showing equipment lockers I'd like to see it. :-) The B-end view of 16229 doesn't show any locker. -Tim O'Connor <

* M&Stl 16209 - bulkhead flat, steel deck, blt 5/59, IL 48-6. Manufacturer? Built as BHF, or converted? <<
M&StL 16209 as built as a bulkhead flat from the gitgo. The M&StL built 15 such cars at Marshalltown in 1959 using GSC flat car castings and a shorter version of the GSC cast bulkhead. The equipment lockers were of the M&StL's own design. These cars left the Marshalltown shops painted bright red with white stenciling. At least one remains in original paint on the Fremont & Elkhorn Valley (or some such a similar name) in Nebraska. -Gene Green <<<


Re: Pre-30s Geo Survey Topo Map of Clifton Forge and Covington area

SUVCWORR@...
 

Al,

Don't know for sure. My guess would be no more than 300 dpi. The files are big enough to be much more than that.

Rich Orr

-----Original Message-----
From: water.kresse@comcast.net
To: STMFC@yahoogroups.com
Sent: Mon, May 30, 2011 6:36 pm
Subject: Re: [STMFC] Pre-30s Geo Survey Topo Map of Clifton Forge and Covington area




Rich,



Many thanks!



Do you know what dpi they have scanned them at? MyTopo is marginal: OK for a
PPT presentation, but leaves a little to be desired for an article image.



Al


----- Original Message -----
From: SUVCWORR@aol.com
To: STMFC@yahoogroups.com
Sent: Monday, May 30, 2011 6:10:13 PM
Subject: Re: [STMFC] Pre-30s Geo Survey Topo Map of Clifton Forge and Covington
area


Al.

Try this.

http://mysite.verizon.net/resteele1/newsites/va_historical_topos.htm

Rich Orr









-----Original Message-----
From: al.kresse <water.kresse@comcast.net>
To: STMFC@yahoogroups.com
Sent: Mon, May 30, 2011 1:48 pm
Subject: [STMFC] Pre-30s Geo Survey Topo Map of Clifton Forge and Covington area



I'm looking for a pre-CCC projects Geo Survey Topo maps of the
Backbone-Covington-Potts Creek - Rich Patch-Clifton Forge, Virginia area before
all the work projects turned old railroad roadbeds into local roads or fire
trails. That whole area should be a maze of mine or furnace trackbeds. Blast
furnaces closed in the teens and twenties, but their iron ore mines stayed open
longer.

The quadrant should break right around Low Moor between Covington and Clifton
Forge. WE have an 1894 topo map of Clifton Forge east almost to Goshen and down

to Glenn Wilton.

Thanks,

Al Kresse



------------------------------------

Yahoo! Groups Links















------------------------------------

Yahoo! Groups Links


O Scale Wabash Hopper Decals

Gary Roe
 

Group,

A project is underway to produce Wabash hopper decals in O Scale.
Basically, these would be O Scale versions of Mark Vaughan's HO hopper
decals. At this time, it is planned to have both 18" and 33" Wabash
lettering, as well as Ann Arbor lettering.

These are going to be done by Dick Kuelbs. He said that he would like to
find out how many people might be interested in these sets. To find out
more info, and to indicate your interest, please write to Dick at the
following address, and include a phone number where he can reach you. Dick
does not write e-mail.

Dick Kuelbs
P.O. Box 830191
Richardson, Tx 75083-0191

gary roe
quincy, illinois

92341 - 92360 of 192712