Date   

Prototypical Southern Pacific HO Models

thecitrusbelt@...
 

Courtesy of David Coscia, below is a link to a list titled “Prototypical HO Scale Models Of The Southern Pacific Railroad And Its Subsidiary Roads”.

 

It is quite extensive and includes PFE and SP narrow gauge entries, plus structures and trucks.

 

http://webpages.charter.net/altalair/sp_models_ho.html

 

Bob Chaparro

Hemet, CA


Re: Red Swift reefers

Andy Sperandeo
 

Hi Mike,

These were the wood cars.

Andy



Re: Santa Fe Bx-3/Bx-6 Box Cars

Benjamin Hom
 

Bob Chaparro asked:
"Are the two wrecked boxcars on the link below Santa Fe Bx-3
or Bx-6 cars?"
http://www.loc.gov/pictures/resource/fsa.8d15036/?co=fsa

Yes.


Ben Hom


Santa Fe Bx-3/Bx-6 Box Cars

thecitrusbelt@...
 

Are the two wrecked boxcars on the link below Santa Fe Bx-3 or Bx-6 cars?

 

http://www.loc.gov/pictures/resource/fsa.8d15036/?co=fsa

 

Thanks.

 

Bob Chaparro

Hemet, CA


Re: Red Swift reefers

Malcolm H. Houck
 

Andy Sperandeo writes:

"I've seen color photos supporting the boxcar red roof for the bright red
Swift reefers."

Any idea whether the cars were wood or steel?

Mike Brock

Steel cars, in images I've seen......
 
Mal Houck


Re: Nickel Plate #28200

Ray Breyer
 

Can anyone tell me about this car? It was identified in the 1934 conductor's book.
Dave Bott

Hi Dave,


NKP 28200 was part of the 25000-29299 series of 38' double sheathed boxcars, built by Haskell and Barker between 1906 and 1910. Originally all wood, these cars were rebuilt in the mid-1920s with steel roofs (Chicago-Cleveland or Murphy), NYC-designed "repair steel" underframes, and in some cases, various steel ends (six types identified to date).

This was the largest single type of "identical" boxcars the NKP ever owned. The Great Depression, downturn in general traffic, and the NKP's circa 1930-1932 equipment purge (half of all cars and engines scrapped) killed off this car. In 1929 there were 3604 of these boxcars listed in the ORER, but in 1934 only 667 were left. The last car in the ORER is listed in April, 1941. One sister car survives in Ft. Wayne, as a stablemate to NKP 765.

For more information on NKP wood boxcars, see my article in the Winter, 2014 issue of the Nickel Plate Road Magazine.
http://nkphts.org/mag/winter2014.html

Regards,

Ray Breyer,

Elgin, IL


Re: Blue box cars

Charles Peck
 

In August 1957 L&N got it's first blue PS-1 boxcars.  The blue designated being
DF equipped.  They were 50 ft. cars numbered 97100-97199 being delivered over
two or three months of that year.
Chuck Peck
Gainesville FL​

On Sun, Nov 2, 2014 at 7:50 AM, cepropst@q.com [STMFC] <STMFC@...> wrote:
 

When did the L&N and FEC start buying/painting blue box cars? If it was after 1960 just say so. Thanks!!
Clark Propst
Mason City Iowa



Nickel Plate #28200

A&Y Dave in MD
 

Can anyone tell me about this car?  It was identified in the 1934 conductor's book.

Sent from Dave Bott' iPhone


Blue box cars

Clark Propst
 

When did the L&N and FEC start buying/painting blue box cars? If it was after 1960 just say so. Thanks!!
Clark Propst
Mason City Iowa


Re: SAL Victory Boxcars

Lee Gautreaux
 

Scott,

I show SAL 19700-19999 as class B-9: 

http://www.railgoat.railfan.net/other_cars/sal_cars/sal_class/box/b-9.htm

I show SAL 19500-19699 as class B-8:

http://www.railgoat.railfan.net/other_cars/sal_cars/sal_class/box/b-8.htm

 

Lee A. Gautreaux - The RailGoat

http://www.railgoat.railfan.net/


Re: 3 grab irons on the left side of a work train UP box

Don Strack
 

Harry Haythorn is close in his description of the car in question. If you view the "Original" version of the photo (the icon at lower right, marked "Sizes"), you can just barely make out the number, which looks to be in the LA&SL 0104xx series.

According to the UP Equipment Record sheets (available elsewhere in the UtahRails photo albums)  these were what UP called "Roadway Boarding" cars, or what we might call an MoW Bunk Car. They were converted in 1927 by LA&SL from B-50-1 boxcars built by AC&F in 1905. The LA&SL Roadway number series appears to run from 010395 through 010472.

Don Strack

 


Re: tank car pressure testing

Thomas Birkett
 

Dave and All



Per the 1930 edition of ”Regulations for the transportation by rail of explosives and other dangerous articles…” Published by the Bureau of Explosives in New York (frequently referred to as the “BOE Tariff”) here is the data on testing and retesting of cars in petroleum products (no acids as they take different schedules.)



For ARA 103 and 104 cars (I assume that the tank car designations would have changed from “ARA” to “AAR” in 1934 when the AAR was formed by a merger of several other organizations. The ARA ran from 1919 to 1934 and prior to that the class designation was “MCB” for “Master Car Builders.” Using Roman numerals for the class.



The rules were the same for the 103 and 104 (lagged or jacketed) series tanks



The tanks were to be tested before they were put in service at 60 psi. The first retest was after 10 years of service (or major repairs) and every 5 years after that.

Safety valves are to be tested before placing in service at 25 psi. and then the same schedule as the tank tests.

Steam coils, if equipped, were to be tested at 200 psi. and should be tested whenever the tank is tested/retested. This information does not show up in the 1930 BOE Tariff but has been standard practice. I did find this requirement in the 1963 AAR “Tank Car Manual.” (sorry for the post 1960 reference but this is the best I have available)



The ARA car class is to be stenciled in 2” letters on each side of the tank, and below in 1” letters:



SAFETY VALVES

TESTED (DATE)

PRESSURE (PSI)

AT (PLACE)

BY (NAME OF FIRM OR RR)



TANK

SAME DATA



STEAM COILS

SAME DATA



These can be grouped such as:



SAFETY VALVES 25 LBS.

TANK 60 LBS.

STEAM COILS 200 LBS.

TESTED (DATE)

BY

AT



DATE BUILT



Hope this helps you tank car builders.

Tom Birkett

Bartlesville, OK











From: STMFC@yahoogroups.com [mailto:STMFC@yahoogroups.com]
Sent: Saturday, October 25, 2014 7:56 PM
To: STMFC@yahoogroups.com
Subject: Re: [STMFC] tank car pressure testing





Tom:



I really appreciate your offer. I am sure the 1930 regs will be perfect for my needs.



Thus far, my modeling interests only include ARA Spec III/ICC Class 103 and ARA Spec IV/ICC 104 (insulated) tank cars.



Based on several trade publications from the early 1920s concerning refineries in New England, I would say that the relevant commodities of the era included gasoline, kerosene, naptha, fuel/bunker oil, "gas oil", lubricating oils, paving materials (asphalt), and paraffin wax.



I have replied to the group in case others are interested, and I look forward to hearing from you.



Thanks!



Dave Parker



On Saturday, October 25, 2014 5:14 PM, "'Tom Birkett' tnbirke@sbcglobal.net [STMFC]" <STMFC@yahoogroups.com> wrote:





Dave



Today I received a copy of the 1930 edition of ”Regulations for the transportation by rail of explosives and other dangerous articles…” It didn’t change much for many years.



I can interpret the retesting schedule for you, but I need to know the tank car class and products if possible. I used to do this kind of work for Phillips Petroleum so I can get you where you need to be.



The only thing I haven’t found is the retest table for steam coils but it is probably here. When I was still working the coils were tested on the same schedule as the tank.



And maybe the proper thing to do is summarize all the retest data in a spread sheet and request help in posting it.



Tom Birkett

Bartlesville, OK



From: STMFC@yahoogroups.com [mailto:STMFC@yahoogroups.com]
Sent: Saturday, October 25, 2014 4:43 PM
To: STMFC@yahoogroups.com
Subject: [STMFC] tank car pressure testing





With the help of Tony’s SP blog (thank you!) and other sources on the WWW, I feel that I am almost up to speed on the ARA/AAR regs concerning the required frequencies for reweigh, repack, and airbrake COT, and how these evolved over time. So far, however, I have been stymied in trying to find the comparable requirements for pressure testing of tank cars (both the tanks and the relief valves). I have searched the discussion archives here, and all the other obvious places that I can think of.

Can anybody steer me in the right direction here? I am primarily interested in “conventional” tank-cars (for gas, fuel oil, kerosene, etc.), with a focus on the mid-1930s.

Apologies if I missed something obvious with my search pattern.

Thanks in advance,

Dave Parker
Riverside, CA









[Non-text portions of this message have been removed]


Re: Red Swift reefers

Mikebrock
 

Andy Sperandeo writes:


"I've seen color photos supporting the boxcar red roof for the bright red Swift reefers."

Any idea whether the cars were wood or steel?

Mike Brock


Re: Sunshine CNW flat cat kits for sale

Clark Propst
 

Sorry, the kits have been sold...Wish I had more...
Clark Propst


Re: Produce Shipping Scenes Presentation

Steve SANDIFER
 

Excellent clinic. Thank you for sharing.



__________________________________________________

J. Stephen Sandifer

Minister Emeritus, Southwest Central Church of Christ

Webmaster, Santa Fe Railway Historical and Modeling Society



From: STMFC@yahoogroups.com [mailto:STMFC@yahoogroups.com]
Sent: Saturday, November 1, 2014 6:07 PM
To: STMFC@yahoogroups.com
Subject: [STMFC] Produce Shipping Scenes Presentation





Bob's recent post reminded me that I have forgotten to post the link to the presentation I did at cocoa Beach and Lisle this year about Produce Related Scenes that can be Modeled. I still hope to get a Higher Res. photo of the Crate Factory photo but I think the presentation will be helpful. I know it has inspired me. A reminder, this is for individual use only and should not be used by anyone as a presentation. However it is OK to make a copy for a friend.



While at Lisle a good friend said he would help with the Cad work to enable me to get some Produce Baskets and Boxes 3D printed to create some patterns for casting. If this works I will offer them to one of the producers of Resin kits.



Bill Welch



Here is the link to the PDF: Produce Scenes for Modeling Oct. 2014.pdf <https://www.dropbox.com/s/k64548g62d6oa0s/Produce%20Scenes%20for%20Modeling%20Oct.%202014.pdf?dl=0>



<https://www.dropbox.com/s/k64548g62d6oa0s/Produce%20Scenes%20for%20Modeling%20Oct.%202014.pdf?dl=0> Image removed by sender. image

<https://www.dropbox.com/s/k64548g62d6oa0s/Produce%20Scenes%20for%20Modeling%20Oct.%202014.pdf?dl=0> Produce Scenes for Modeling Oct. 2014.pdf

Shared with Dropbox




<https://www.dropbox.com/s/k64548g62d6oa0s/Produce%20Scenes%20for%20Modeling%20Oct.%202014.pdf?dl=0> View on www.dropbox.com

Preview by Yahoo


Re: Red Swift reefers

frograbbit602
 

The photo on Pierre Oliver's blog is one of several taken by George Berkstresser in September 1954 at Siox City, Iowa. One these photos appeared in B&W in an article "The Swift "Twins"" by Bill Kee, photos by George Berkstresser in the December 1976 NMRA BULLETIN, p. 32. The B&W photo shows same cars taken from a different angle. Another B&W photo in this series appeared in Railmodel Journal in February 1993, p. 31. Photo credit is George Berkstresser photo from Jim Haskell collection.

Lester Breuer


Produce Shipping Scenes Presentation

Bill Welch
 

Bob's recent post reminded me that I have forgotten to post the link to the presentation I did at cocoa Beach and Lisle this year about Produce Related Scenes that can be Modeled. I still hope to get a Higher Res. photo of the Crate Factory photo but I think the presentation will be helpful. I know it has inspired me. A reminder, this is for individual use only and should not be used by anyone as a presentation. However it is OK to make a copy for a friend.


While at Lisle a good friend said he would help with the Cad work to enable me to get some Produce Baskets and Boxes 3D printed to create some patterns for casting. If this works I will offer them to one of the producers of Resin kits.


Bill Welch


Here is the link to the PDF: Produce Scenes for Modeling Oct. 2014.pdf

 


Kanawha & Michigan USRA Twin Hoppers

Doug Chapman
 

Hello,

 

I am looking for photographs and painting diagrams for USRA twin hoppers lettered for the Kanawha and Michigan Railway, a subsidiary of the New York Central.  The K&M received 500 cars in two separate lots: 300 cars (Lot 396-H) in 1918, numbered 27500-27799, built by Pressed Steel, McKees Rocks, PA and 200 cars (Lot 397-H) in 1918, numbered 27800-27999, built by Ralston Steel Car, Columbus, OH.  The cars in Lot 396-H were relettered NYC and renumbered 401500-401799 beginning in 1925, and subsequently renumbered 834500-834799.  The cars in Lot 397-H were relettered NYC and renumbered 401800-401999 in 1925, and subsequently renumbered 834800-834999.

 

Does anyone on the STMFC list have any photos and/or painting diagrams for these cars as built? In advance, thank you for your help and assistance.  I’m am grateful!

 

Doug Chapman

Montclair, VA



Re: Red Swift reefers

Andy Sperandeo
 

I've seen color photos supporting the boxcar red roof for the bright red Swift reefers. I don't have one to post, because for 1947 my Swift reefers are still yellow. But those had a boxcar red roof too. – Andy


Re: Red Swift reefers

Clark Propst
 

Which ever hue of red your friend chooses try shooting the car with white first. Will make the red ‘pop’ better.
Clark Propst
Mason City Iowa

61121 - 61140 of 189704