Date   

Re: UTLX tank car

Bruce Smith
 

Charlie,

There are several photos of UTLX type X cars in Ted Culotta's Steam Era Freight Cars Reference Manual Volume 2: Tank Cars, including an end shot of 58305, however that is the only specific shot of this series in that book.  However, there are a number of useful photos including one of an underframe without the tank that is invaluable.

In HO we are lucky to have a 3D printed frame from Shapeways that fits the Roundhouse/MDC tank.  It might be possible to have that frame printed in O scale as well...

Regards
Bruce Smith
Auburn, AL


From: STMFC@... [STMFC@...]
Sent: Saturday, December 06, 2014 8:34 AM
To: STMFC@...
Subject: Re: [STMFC] UTLX tank car



Thanks to all for the info.  Is there a good photo of a 5xxxx series type X published somewhere?  I’d like to have one of these in my O scale roster one day.  I already have a type V built from a On3 kit and converted back to standard gauge.
 
Charlie
 
Sent: Friday, December 05, 2014 9:03 PM
Subject: RE: [STMFC] UTLX tank car
 


I agree that this is a type X car.  UTLX did a lot of converting of older cars for new services by adding heater coils, which it the reason for the patch on the car end.  So, this car would have been in a 5xxxx number series.  It appears that at this or some time, they have also replaced the screw type dome cover with the bolted style and they were able to add the single safety valve, which is all that is required for cars from 6500 gallons capacity and lower.  This car does appear to be this size, judging for the large number of photos I have studied over the years.

 

It’s a neat picture to see, for sure.

 

Regards,

Steve Hile

 


 




Re: Xxtreme Modeling presentation

Aley, Jeff A
 

Fenton,

 

               I really believe that you MUST attend the clinics on “SRR Early Pulpwood Cars”.  The clinic is a brief history of the pulpwood industry (1930's through the 1950's), the cars used to transport it, and how to model them.  It even includes a section on operations - how a modeler might model the pick-up and loading of the cars and the industries that they were delivered to.  Photos and drawings of the prototype and finished models are shown as well.

 

               In fact, I think you must attend both showings of this clinic – you’re the presenter!

 

Regards,

 

-Jeff Aley

Clinic Chairman, PR’15

 

P.S. I’ll try to get the descriptions of ALL of the clinics to our webmaster so everyone can see what we have lined up.  Keep an eye on www.prototyperails.com for updates.

 

 

From: STMFC@... [mailto:STMFC@...]
Sent: Saturday, December 06, 2014 7:09 AM
To: STMFC@...
Subject: [STMFC] Re: Xxtreme Modeling presentation

 

 

More shameless promotion, can it get any better?  Now 2 must see clinics

 

--

Fenton Wells
5 Newberry Lane

Pinehurst NC 28374
910-420-1144
srrfan1401@...


Re: Xxtreme Modeling presentation

Bill Welch
 

I did not realize that The Beach was some kind of competition!

Bill Welch


Re: [SPAM]Re: Re: Accurail USRA hopper

Nelson Moyer <ku0a@...>
 

I checked The Postwar Freight Car Fleet (Kline and Culotta) photos for Q
cars photographed in PA and environs, and the only ones in the book are auto
boxcars boxcars, and BREX reefers. Boxcar classes were XA-7, XA-8, XM-23,
XM-30, and XM-32. No stock cars, flat cars, hoppers, or gondolas. Photos
were taken circa 1947.



Boxcars and reefers circulated nationally; not so much for other car types.



Nelson Moyer







From: STMFC@yahoogroups.com [mailto:STMFC@yahoogroups.com]
Sent: Saturday, December 06, 2014 10:17 AM
To: STMFC@yahoogroups.com
Subject: [SPAM]Re: [STMFC] Re: Accurail USRA hopper





Clark Cone asked:
"Curious, what are the chances of a Q car ending up on the east coast?"

From the 1947-1951 Rutland data that I have on hand from Armand Premo's
collection, zero CB&Q cars of 1252 hoppers. One C&S hopper (18018, USRA
twin) recorded on Train 10 on September 7, 1950.

Ben Hom


Re: Accurail USRA hopper

Benjamin Hom
 

Clark Cone asked:
"Curious, what are the chances of a Q car ending up on the east coast?"

From the 1947-1951 Rutland data that I have on hand from Armand Premo's collection, zero CB&Q cars of 1252 hoppers. One C&S hopper (18018, USRA twin) recorded on Train 10 on September 7, 1950.


Ben Hom


Lake Shore model rr open house

Gerry Woitalewicz
 

The Lake Shore model rr club is have their annual open house this weekend if anyone will be in the Chicago land area.. See their website for more details..
Gerry Wojo...




Xxtreme Modeling presentation

gary laakso
 

But, Clark, is there a truss rod or two to go with the rivets?

gary Laakso
South of Mike Brock


On Dec 6, 2014, at 10:05 AM, cepropst@q.com [STMFC] <STMFC@...> wrote:

 

Beings Bill is promoting Cocoa Beach and his clinic, I’ll promote myself as the “Anti-Welch”  ;  ))
 
Jeff has change the name of my talk because he didn’t think my title was descriptive enough. That’s ok, just don’t be confused.
I’m your guy if you want to see how I took off the shelf engines, freight cars and brought them up to ‘my standard’ for layout use.
Oh, there’s even a rivet or two...
Clark Propst
Mason City Iowa


Re: Xxtreme Modeling presentation

arved_grass
 

With my luck, both will be scheduled at the same time.

So many clinics - so little time!

Arved Grass
Arved_Grass@yahoo.com or Arved@I-Do-Photography.com
Fleming Island, Florida

--------------------------------------------

On Sat, 12/6/14, O Fenton Wells srrfan1401@gmail.com [STMFC] <STMFC@yahoogroups.com> wrote:

Subject: [STMFC] Re: Xxtreme Modeling presentation
To: STMFC@yahoogroups.com
Date: Saturday, December 6, 2014, 10:09 AM



More shameless promotion, can it get
any better?  Now 2 must see clinics

--
Fenton Wells
5 Newberry LanePinehurst NC 28374
910-420-1144
srrfan1401@gmail.com


Rivet Making

Matt Goodman
 

Recently there was an interesting thread on rivets / rivet making on the list.

Through another source, I found the following video on another man’s way of producing and installing rivets. About 2.5 minutes long, and well produced:

https://www.youtube.com/watch?v=69ovWGTSPg0

Matt Goodman
Columbus OH U.S.


Re: Xxtreme Modeling presentation

O Fenton Wells
 

More shameless promotion, can it get any better?  Now 2 must see clinics

--
Fenton Wells
5 Newberry Lane
Pinehurst NC 28374
910-420-1144
srrfan1401@...


Re: Xxtreme Modeling presentation

Clark Propst
 

Beings Bill is promoting Cocoa Beach and his clinic, I’ll promote myself as the “Anti-Welch”  ;  ))
 
Jeff has change the name of my talk because he didn’t think my title was descriptive enough. That’s ok, just don’t be confused.
I’m your guy if you want to see how I took off the shelf engines, freight cars and brought them up to ‘my standard’ for layout use.
Oh, there’s even a rivet or two...
Clark Propst
Mason City Iowa


Re: Car weight question

Clark Propst
 

I'm looking at a certain class of boxcar that was built with 3 different
styles of trucks through it's series. ASF A-3, Sullin and Buckeye trucks.
Would there have been enough difference in the weight of the different
trucks to have the different build orders show different "Light weight"
stencils on the cars? Pierre Oliver

 
To me, Pierre wins the rivet counting award of the month  ;  )) The Brass Rivet trophy.
I have copies of car cards with their reweighs, places and dates. Don’t think I’ve ever matched them where going a model. Never even thought of it, but Pierre did!
 
Clark Propst
Mason City Iowa


Re: Car weight question

Greg Martin
 

Pierre,
 
You never said what the difference was. Could be the trucks but cars from the same lot varied for the first cat to the last, by as much as three hundred pounds.
 
Greg Martin
 
 
Eventually all things merge into one and a river runs through it.
Norman Maclean
 

In a message dated 12/6/2014 5:27:07 A.M. Pacific Standard Time, STMFC@... writes:
I'm looking at a certain class of boxcar that was built with 3 different styles of trucks through it's series. ASF A-3, Sullin and Buckeye trucks.
Would there have been enough difference in the weight of the different trucks to have the different build orders show different "Light weight" stencils on the cars?
--
Pierre Oliver


Re: UTLX tank car

Charles Morrill
 

Thanks to all for the info.  Is there a good photo of a 5xxxx series type X published somewhere?  I’d like to have one of these in my O scale roster one day.  I already have a type V built from a On3 kit and converted back to standard gauge.
 
Charlie
 

Sent: Friday, December 05, 2014 9:03 PM
Subject: RE: [STMFC] UTLX tank car
 


I agree that this is a type X car.  UTLX did a lot of converting of older cars for new services by adding heater coils, which it the reason for the patch on the car end.  So, this car would have been in a 5xxxx number series.  It appears that at this or some time, they have also replaced the screw type dome cover with the bolted style and they were able to add the single safety valve, which is all that is required for cars from 6500 gallons capacity and lower.  This car does appear to be this size, judging for the large number of photos I have studied over the years.

 

It’s a neat picture to see, for sure.

 

Regards,

Steve Hile

 


 


Re: Xxtreme Modeling presentation

O Fenton Wells
 

Shameless advertising for your clinic!!!  Excellent, see you there.

On Fri, Dec 5, 2014 at 11:17 PM, fgexbill@... [STMFC] <STMFC@...> wrote:
 

I finally polished off the two articles I was working on for Speedwitch's modeling journal and began sorting through photos I plan to use for my Cocoa Beach presentation. As anyone who writes knows, although you may have the topic or title in your head, it is great good fortune that when in moment you sit down to write or assemble that the Muse comes and rests on your shoulder. I am a very big fan of Jack (or John) Spencer and I cannot believe how much what I am going to show attendees differs from what Jack does. For those who are familiar, please tell me after The Beach what you think, am I right when I say this.


I say this because what I am going to show you deals with mostly wood-sheathed cars and in my studied opinion many things like Placard Boards, Sill Steps, and Door Stops just to name several small but important details of the cars of the day that commonly varied from railroad to railroad and it these kinds of detail differences that I enjoy modeling and seek to individualize and I hope to Evangelize you to enjoy this as well. You will also see some scratch built tank dome fixtures made by using my Dremel as a lathe at a very slow speed and other techniques from my wacky mind such as how to make a flange when you need one. I hope you will come and join in my Crazy.


Bill Welch




--
Fenton Wells
5 Newberry Lane
Pinehurst NC 28374
910-420-1144
srrfan1401@...


Re: Car weight question

Tim O'Connor
 


small differences in weight (+/- 100 lb precision) seem highly likely


I'm looking at a certain class of boxcar that was built with 3 different styles of trucks through it's series. ASF A-3, Sullin and Buckeye trucks.
Would there have been enough difference in the weight of the different trucks to have the different build orders show different "Light weight" stencils on the cars?
-- 
Pierre Oliver


Re: Car weight question

Bill Vaughn
 

Light weight is within 100 pounds.  So variances in steel, trucks etc etc, could change the weight.  Remember light weight in our era of modeling was used for billing. 

Bill Vaughn


On Friday, December 5, 2014 4:23 PM, "richtownsend@... [STMFC]" wrote:


 
I've seen cases where that is the case, but I don't know with respect to those specific trucks.
 
Richard Townsend
Lincoln City, Oregon
 
 
-----Original Message-----
From: Pierre Oliver pierre.oliver@... [STMFC]
To: STMFC
Sent: Fri, Dec 5, 2014 1:35 pm
Subject: [STMFC] Car weight question

 
I'm looking at a certain class of boxcar that was built with 3 different styles of trucks through it's series. ASF A-3, Sullin and Buckeye trucks.
Would there have been enough difference in the weight of the different trucks to have the different build orders show different "Light weight" stencils on the cars?
--
Pierre Oliver
www.elgincarshops.com
www.yarmouthmodelworks.com



Xxtreme Modeling presentation

Bill Welch
 

I finally polished off the two articles I was working on for Speedwitch's modeling journal and began sorting through photos I plan to use for my Cocoa Beach presentation. As anyone who writes knows, although you may have the topic or title in your head, it is great good fortune that when in moment you sit down to write or assemble that the Muse comes and rests on your shoulder. I am a very big fan of Jack (or John) Spencer and I cannot believe how much what I am going to show attendees differs from what Jack does. For those who are familiar, please tell me after The Beach what you think, am I right when I say this.


I say this because what I am going to show you deals with mostly wood-sheathed cars and in my studied opinion many things like Placard Boards, Sill Steps, and Door Stops just to name several small but important details of the cars of the day that commonly varied from railroad to railroad and it these kinds of detail differences that I enjoy modeling and seek to individualize and I hope to Evangelize you to enjoy this as well. You will also see some scratch built tank dome fixtures made by using my Dremel as a lathe at a very slow speed and other techniques from my wacky mind such as how to make a flange when you need one. I hope you will come and join in my Crazy.


Bill Welch


Cocoa

Schuyler Larrabee
 

I will be attending Prototype Rails 2015, where we will learn more about Steam Era Freight Cars.

 

But I need a roommate for Friday and Saturday nights.  Please contact me OFF LIST at schuyler.larrabee (at) Verizon.net.

 

Thanks.

 

Schuyler


Re: UTLX tank car

Steve and Barb Hile
 

I agree that this is a type X car.  UTLX did a lot of converting of older cars for new services by adding heater coils, which it the reason for the patch on the car end.  So, this car would have been in a 5xxxx number series.  It appears that at this or some time, they have also replaced the screw type dome cover with the bolted style and they were able to add the single safety valve, which is all that is required for cars from 6500 gallons capacity and lower.  This car does appear to be this size, judging for the large number of photos I have studied over the years.

 

It’s a neat picture to see, for sure.

 

Regards,

Steve Hile

 


From: STMFC@... [mailto:STMFC@...]
Sent: Friday, December 05, 2014 12:07 PM
To: STMFC@...
Subject: Re: [STMFC] UTLX tank car

 

 

Charlie,

 

I don’t think that it is really appropriate to call this a “high walkway” tank car.  True high walkway cars had the walkway up around where the hand rail is.  This car is appears to be a UTLX Type X design (based on the absence of a lip at the bottom of the tank which would indicate a type V, Van Dyke frames design).  If there is only a single relief valve, then the capacity must be 6,000 gallons or less.  However, there may be a second valve at the opposite end of the dome, which is obscured.

 

Regards

Bruce

 

Bruce F. Smith            

Auburn, AL

https://www5.vetmed.auburn.edu/~smithbf/

"Some days you are the bug, some days you are the windshield."

 

 

On Dec 5, 2014, at 11:53 AM, 'Charlie Morrill' badlands@... [STMFC] <STMFC@...> wrote:

 

There is a high walkway UTLX tank car in this photo:

http://www.ebay.com/itm/Negative-Southern-Pacific-Railroad-Steam-Locomotive-2769-Lake-Tahoe-Branch-/271694384724?pt=LH_DefaultDomain_0&hash=item3f423f4e54

I'm guessing an 8000 gal capacity.  Note the single top-of-dome relief valve
instead of the side relief valve and the bolted cover plate on the tank end.
Any idea of the number series?

BTW To help date the photo, this branch line was abandoned Nov. 1943.

Charlie 

57621 - 57640 of 187390