|
Re: to UP fans: -B-50-25 Express Box - converting "back" to normal box car?
vapeurchapelon
Ed,
many thanks for that link. Yes, all questions have been answered (most important, that the model - unfortunately - won't match my needs.)
Many greetings
Johannes
Gesendet: Donnerstag, 28. Februar 2019 um 22:26 Uhr
Von: "Ed Hawkins" <hawk0621@...> An: main@RealSTMFC.groups.io Betreff: Re: [RealSTMFC] to UP fans: -B-50-25 Express Box - converting "back" to normal box car? On Feb 28, 2019, at 10:26 AM, vapeurchapelon <j.markwart@...> wrote:
I still need more 40' box cars, and I consider purchasing this one: Johannes,
The following link provides history & data on the B-50-25 box cars that began in 1939 as UP 9100-9199. RP CYC Volumes 6 and 8 also provide information & photos. In addition the UPHS has published articles in The Streamliner on UP express box cars.
This data should provide sufficient information to answer all or most of your questions. Suggest coming back with specific questions you may still have after reviewing the link.
Regards,
Ed Hawkins
|
|
|
|
Re: to UP fans: -B-50-25 Express Box - converting "back" to normal box car?
Ed Hawkins
On Feb 28, 2019, at 10:26 AM, vapeurchapelon <j.markwart@...> wrote: I still need more 40' box cars, and I consider purchasing this one: Johannes, The following link provides history & data on the B-50-25 box cars that began in 1939 as UP 9100-9199. RP CYC Volumes 6 and 8 also provide information & photos. In addition the UPHS has published articles in The Streamliner on UP express box cars. This data should provide sufficient information to answer all or most of your questions. Suggest coming back with specific questions you may still have after reviewing the link. Regards, Ed Hawkins
|
|
|
|
Re: Fw: [RealSTMFC] ATSF Bx56
charles slater
Scott I still have a couple of those kits on hand, contact me off list for kit numbers and price.
Charlie Slater
Patternmaker
Sent from Outlook
From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> on behalf of Scott <repairman87@...>
Sent: Wednesday, February 27, 2019 6:33 PM To: main@RealSTMFC.groups.io Subject: Re: Fw: [RealSTMFC] ATSF Bx56 Can you make the masters again? 😁 I am sure a lot of people would love to have that car.
Scott McDonald
|
|
|
|
Throwback Thursday: Varney
Benjamin Hom
Varney ad from the back cover of the February 1959 issue of Model Railroader.
Ben Hom
|
|
|
|
to UP fans: -B-50-25 Express Box - converting "back" to normal box car?
vapeurchapelon
Hello friends,
I still need more 40' box cars, and I consider purchasing this one: https://www.brasstrains.com/Classic/Product/Detail/098956/HO-Brass-Model-OMI-1338-UP-Union-Pacific-B-50-25-Express-Boxcar-24152-Unpainted-1984-Run-Ajin Was the prototype always an express box car, or was it a conversion out of an ordinary freight car? If the latter - would it be possible to backdate it with reasonable effort? What exactly makes this an express box car? The two most obvious details I could tell are the steam line and the type of trucks - both easy to remove/ replace. Would it then be just a usual freight car (which class?)? Many thanks and best regards Johannes Modeling the early post-war years up to about 1953
|
|
|
|
Re: Rail Road Progress kits question
jerryglow2
Zoom down to 50% so you cat a whole page, do a screen shot, edit it and past it in your graphics software. I use CorelDraw so I can export all pages of an article as a PDF
|
|
|
|
Re: ATSF Bx56
Paul Doggett
Thank you Geogre.
toggle quoted messageShow quoted text
Paul
On 28 Feb 2019, at 12:34, gtws00 via Groups.Io <gtws00@...> wrote:
|
|
|
|
Re: ATSF Bx56
gtws00
Nicely Done Paul.
Should look good all painted. Those doors make for a interesting car George Toman
|
|
|
|
Re: H30 in Service
Todd Horton
Wow. I looked at your Facebook page, that is very impressive work you’ve done building those cars from metal. Todd Horton
toggle quoted messageShow quoted text
On Feb 27, 2019, at 11:22 AM, csxt5555 via Groups.Io <csxt5555@...> wrote:
|
|
|
|
Unknown Refrigerator at Steamtown
Garth Groff <sarahsan@...>
Friends,
I recently scanned up my photos from a circa 2000 visit to Steamtown. Among them is this unmarked refrigerator car. It appears to be of MDT design. Can anybody help me with a positive ID, including (hopefully) a car number? I have been unable to find any references to this car on the Steamtown site or Wikipedia. I hate untidiness in my collection. Thank you in advance. Yours Aye, Garth Groff
|
|
|
|
Re: ATSF Bx56
Paul Doggett
Thank you guys 😊
toggle quoted messageShow quoted text
Paul Doggett England 🏴
On 28 Feb 2019, at 02:33, Scott <repairman87@...> wrote:
|
|
|
|
Re: D&H Seley hoppers
Allan Smith
The Post War Freight Car Fleet book has photos of D&H Hoppers on Pages 135, but of cars 6851-11600. The notes state that C A Seley designed cars like this for the D&H in 1901. Al Smith Sonora CA
On Wednesday, February 27, 2019 07:43:42 PM PST, Allan Smith <smithal9@...> wrote:
Try this photo. It is a dark photo but can be lightened. Al Smith Sonora Ca
On Wednesday, February 27, 2019 06:01:17 PM PST, Donald B. Valentine via Groups.Io <riverman_vt@...> wrote:
Hello folks, Some help is needed with Delaware & Hudson Seley hopper cars. I hacve three of the O&W Car Shops D&H Seley hoppers all painted and ready to decal with the decals on hand as well. My 1938 and 1947 ORER's indicate that all of these cars belonged to one of two groups, the 1001 - 1151 group or the 1152 - 2250 group. BUT, in looking for a photo to serve as a lettering guide the only one found was on pages #410-#411 or Jim Shaughnessy's D&H book and therein lies the problem. The photo shows on;ly the right half or a car side. With a D&H Challenger pushing the train with this car up the northboud grade to Arrarat Summit it is clearly the era I model but the car number has five digits rather than only four with a number that appears to be #10010! Unfortunately I cannot find any such number group for D&H cars of any tyep in the ORER's I have here. My next ORER is from Jan. 1962 at which time the same two car niber groups are in use for hopper cars but they are now stated to be of steel rather than only having a steel underframe. I am not knowledgeable enough about the D&H to know if the Seley cars were rebuilt with stell and kept the same numbers, which I very much doubt, or whether new cars were purchased and given the same number groups as the Seley cars, which I also doubt. So how does one account for a number in a #10000 series? These cars were also found at one time with two, three and four hopper bays. Could one style be gone by the post war period and the remaining cars assigned to one number gfroup or the other depending upon thre number of hopper bays it had? I have no clue from what has been found to date. Thius any helpo with these issues would be appreciated. Thanks in advance, Don Valentine
|
|
|
|
Re: D&H Seley hoppers
Allan Smith
Try this photo. It is a dark photo but can be lightened. Al Smith Sonora Ca
On Wednesday, February 27, 2019 06:01:17 PM PST, Donald B. Valentine via Groups.Io <riverman_vt@...> wrote:
Hello folks, Some help is needed with Delaware & Hudson Seley hopper cars. I hacve three of the O&W Car Shops D&H Seley hoppers all painted and ready to decal with the decals on hand as well. My 1938 and 1947 ORER's indicate that all of these cars belonged to one of two groups, the 1001 - 1151 group or the 1152 - 2250 group. BUT, in looking for a photo to serve as a lettering guide the only one found was on pages #410-#411 or Jim Shaughnessy's D&H book and therein lies the problem. The photo shows on;ly the right half or a car side. With a D&H Challenger pushing the train with this car up the northboud grade to Arrarat Summit it is clearly the era I model but the car number has five digits rather than only four with a number that appears to be #10010! Unfortunately I cannot find any such number group for D&H cars of any tyep in the ORER's I have here. My next ORER is from Jan. 1962 at which time the same two car niber groups are in use for hopper cars but they are now stated to be of steel rather than only having a steel underframe. I am not knowledgeable enough about the D&H to know if the Seley cars were rebuilt with stell and kept the same numbers, which I very much doubt, or whether new cars were purchased and given the same number groups as the Seley cars, which I also doubt. So how does one account for a number in a #10000 series? These cars were also found at one time with two, three and four hopper bays. Could one style be gone by the post war period and the remaining cars assigned to one number gfroup or the other depending upon thre number of hopper bays it had? I have no clue from what has been found to date. Thius any helpo with these issues would be appreciated. Thanks in advance, Don Valentine
|
|
|
|
Re: Fw: [RealSTMFC] ATSF Bx56
Scott
Can you make the masters again? 😁 I am sure a lot of people would love to have that car.
Scott McDonald
|
|
|
|
D&H Seley hoppers
Donald B. Valentine <riverman_vt@...>
Hello folks, Some help is needed with Delaware & Hudson Seley hopper cars. I hacve three of the O&W Car Shops D&H Seley hoppers all painted and ready to decal with the decals on hand as well. My 1938 and 1947 ORER's indicate that all of these cars belonged to one of two groups, the 1001 - 1151 group or the 1152 - 2250 group. BUT, in looking for a photo to serve as a lettering guide the only one found was on pages #410-#411 or Jim Shaughnessy's D&H book and therein lies the problem. The photo shows on;ly the right half or a car side. With a D&H Challenger pushing the train with this car up the northboud grade to Arrarat Summit it is clearly the era I model but the car number has five digits rather than only four with a number that appears to be #10010! Unfortunately I cannot find any such number group for D&H cars of any tyep in the ORER's I have here. My next ORER is from Jan. 1962 at which time the same two car niber groups are in use for hopper cars but they are now stated to be of steel rather than only having a steel underframe. I am not knowledgeable enough about the D&H to know if the Seley cars were rebuilt with stell and kept the same numbers, which I very much doubt, or whether new cars were purchased and given the same number groups as the Seley cars, which I also doubt. So how does one account for a number in a #10000 series? These cars were also found at one time with two, three and four hopper bays. Could one style be gone by the post war period and the remaining cars assigned to one number gfroup or the other depending upon thre number of hopper bays it had? I have no clue from what has been found to date. Thius any helpo with these issues would be appreciated. Thanks in advance, Don Valentine
|
|
|
|
Re: ATSF Bx56
gary laakso
Paul:
toggle quoted messageShow quoted text
I just added the connecting pipes from a similarly situated brake cylinder on a MKT gondola and it was something new to me. I have one of these kits in line to assemble. Great job and it is a distinctive model. Gary Laakso Northwest of Mike Brock
-----Original Message-----
From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> On Behalf Of Bill Keene via Groups.Io Sent: Wednesday, February 27, 2019 3:32 PM To: main@RealSTMFC.groups.io Subject: Re: [RealSTMFC] ATSF Bx56 Paul, Thanks for sharing your efforts. Very good efforts, I might add. Also, like what has been said, I too like the mixed doors. Great way to add variety. I was just out in the garage putting more kits and stuff on the shelves and noticed that there was a Sunshine Bx-56 kit “hiding” in the cabinet. I will keep the photos of your progress for reference. Cheers & Happy Modeling, Bill Keene Irvine, CA On Feb 27, 2019, at 7:08 AM, Paul Doggett via Groups.Io <paul.doggett2472=icloud.com@groups.io> wrote:
|
|
|
|
Fw: [RealSTMFC] ATSF Bx56
charles slater
toggle quoted messageShow quoted text
From: Charles Slater <atsfcondr42@...>
Sent: Wednesday, February 27, 2019 4:01 PM To: Paul Doggett via Groups.Io Subject: Re: [RealSTMFC] ATSF Bx56
The model is coming along nicely Paul. I know when you get all the grab iron holes drilled and finish the car, you will enjoy running it on your railroad it is a very distinct car and it was fun
Making the patterns for it for Martin.
Charlie Slater
The Pattern Maker
Sent from
Outlook From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> on behalf of Paul Doggett via Groups.Io <paul.doggett2472@...>
Sent: Wednesday, February 27, 2019 7:08 AM To: main@RealSTMFC.groups.io Subject: [RealSTMFC] ATSF Bx56 Some progress on a Sunshine ATSF Bx56 Just need to drill about 76 #79 holes 🤪🤪🤪 Paul Doggett England 🏴
|
|
|
|
Re: ATSF Bx56
Bill Keene
Paul,
toggle quoted messageShow quoted text
Thanks for sharing your efforts. Very good efforts, I might add. Also, like what has been said, I too like the mixed doors. Great way to add variety. I was just out in the garage putting more kits and stuff on the shelves and noticed that there was a Sunshine Bx-56 kit “hiding” in the cabinet. I will keep the photos of your progress for reference. Cheers & Happy Modeling, Bill Keene Irvine, CA
On Feb 27, 2019, at 7:08 AM, Paul Doggett via Groups.Io <paul.doggett2472=icloud.com@groups.io> wrote:
|
|
|
|
FS: More books for east coasters
Allen Montgomery
NYC- Rails Along The Hudson by B.R. Chapter NRHS Grand Trunk Heritage-Steam in New England by Philip R. Hastings Western Maryland Steam In The Alleghenies by Ross Grenard and John Krause B&O Heritage 1945-55 By John Krause and Ed Crist Susquehanna By John Krause and Ed Crist Connecticut Railroads..An Illistrated History by The Connecticut Historical Society The Maine Two Footers by Linwood W Moody The Interurban Era by William D. Middleton And one that I already have... Nevada County Narrow Gauge by Gerald M. Best If interested, contact me off line, please.
|
|
|
|
Re: H30 in Service
csxt5555
Tim
toggle quoted messageShow quoted text
I did 10 of these as a kit. I also offered the 55 ton offset hopper car. These are currently sold out and I just sold out of the rounded end Clinchfield/C&O/NKP hoppers. If you’re are on Facebook you can check out my Erwin Shops page. Kevin
On Feb 27, 2019, at 11:13 AM, Tim O'Connor <timboconnor@...> wrote:
|
|
|
