Date   

Re: is there a prototype for the paint scheme on the Carnation reefer?

BRIAN PAUL EHNI
 

That ginormous URL doesn’t open anything.

 

 

Thanks!
--

Brian Ehni

 

 

From: <main@RealSTMFC.groups.io> on behalf of "Claus Schlund &#92;(HGM&#92;)" <claus@...>
Reply-To: <main@RealSTMFC.groups.io>
Date: Thursday, April 18, 2019 at 3:36 PM
To: <main@RealSTMFC.groups.io>
Subject: [RealSTMFC] is there a prototype for the paint scheme on the Carnation reefer?

 

Hi Richard, Tony, and List Members,

 

I assume we are trying to compare the Athearn body and paint scheme shown at the link below...

 

 

with the Carnation wood reefers shown in the rediculously long link below...

 

 

 

Is that right?

 

Claus Schlund

 

----- Original Message -----

Sent: Thursday, April 18, 2019 1:26 PM

Subject: Re: [RealSTMFC] Throwback Thursday: Athearn Rolling Stock Ad, Model Railroader, December 1962

 

Richard Townsend wrote:

> A question I have asked before, but never gotten a suitable answer: is there a prototype for the paint scheme on the Carnation reefer?

  Certainly not on the Athearn body. There was a similar though not identical scheme on a pre-1934 billboard car. I suspect Athearn winged it on that one, possibly using current Carnation advertising.

Tony Thompson             Editor, Signature Press, Berkeley, CA
2906 Forest Ave., Berkeley, CA 94705         www.signaturepress.com
(510) 540-6538; e-mail, tony@...
Publishers of books on railroad history








Re: Scratchbuilding a car in styrene

Charlie Vlk
 

All-

My off-topic inquiry did reveal that lapped profile boards did make it into car interiors and floors for their intrinsic ability to provide a tighter car for grain and other loads.

And as somebody mentioned the term I was really thinking of was “lapstrake”.

I didn’t expect to see a website dedicated to Joanna’s not shiplap and I’m happy I asked.

Thanks,

Charlie Vlk


Re: Chicagoland FGEX Reefer

James E Kubanick
 

Great looking car, Bob. I have one to build and will try your clever technique on the scribing issue. Thanks for sharing with us.

Jim Kubanick

On Thursday, April 18, 2019, 11:40:22 AM EDT, Michael Gross <ActorMichaelGross@...> wrote:


Very nicely done, and very innovative!
--
Michael Gross
Pasadena, CA


Re: is there a prototype for the paint scheme on the Carnation reefer?

Claus Schlund \(HGM\)
 

----- Original Message -----
Sent: Thursday, April 18, 2019 4:36 PM
Subject: [RealSTMFC] is there a prototype for the paint scheme on the Carnation reefer?

Hi Richard, Tony, and List Members,
 
I assume we are trying to compare the Athearn body and paint scheme shown at the link below...
 
 
with the Carnation wood reefers shown in the rediculously long link below...
 
 
 
Is that right?
 
Claus Schlund
 
----- Original Message -----
Sent: Thursday, April 18, 2019 1:26 PM
Subject: Re: [RealSTMFC] Throwback Thursday: Athearn Rolling Stock Ad, Model Railroader, December 1962

Richard Townsend wrote:

> A question I have asked before, but never gotten a suitable answer: is there a prototype for the paint scheme on the Carnation reefer?

  Certainly not on the Athearn body. There was a similar though not identical scheme on a pre-1934 billboard car. I suspect Athearn winged it on that one, possibly using current Carnation advertising.

Tony Thompson             Editor, Signature Press, Berkeley, CA
2906 Forest Ave., Berkeley, CA 94705         www.signaturepress.com
(510) 540-6538; e-mail, tony@...
Publishers of books on railroad history









Re: is there a prototype for the paint scheme on the Carnation reefer?

Tony Thompson
 

Claus Schlund wrote:

Hi Richard, Tony, and List Members,
 
I assume we are trying to compare the Athearn body and paint scheme shown at the link below...
 

     Nothing at this link, Claus. But I am familiar with the white Athearn reefer scheme.

Tony Thompson             Editor, Signature Press, Berkeley, CA
2906 Forest Ave., Berkeley, CA 94705         www.signaturepress.com
(510) 540-6538; e-mail, tony@...
Publishers of books on railroad history






Re: is there a prototype for the paint scheme on the Carnation reefer?

Tony Thompson
 


On Apr 18, 2019, at 1:36 PM, Claus Schlund &#92;(HGM&#92;) wrote:

Hi Richard, Tony, and List Members,
 
I assume we are trying to compare the Athearn body and paint scheme shown at the link below...
 
 
with the Carnation wood reefers shown in the rediculously long link below...
 
 
 
Is that right?
 
Claus Schlund
 
----- Original Message -----
Sent: Thursday, April 18, 2019 1:26 PM
Subject: Re: [RealSTMFC] Throwback Thursday: Athearn Rolling Stock Ad, Model Railroader, December 1962

Richard Townsend wrote:

> A question I have asked before, but never gotten a suitable answer: is there a prototype for the paint scheme on the Carnation reefer?

  Certainly not on the Athearn body. There was a similar though not identical scheme on a pre-1934 billboard car. I suspect Athearn winged it on that one, possibly using current Carnation advertising.

Tony Thompson             Editor, Signature Press, Berkeley, CA
2906 Forest Ave., Berkeley, CA 94705         www.signaturepress.com
(510) 540-6538; e-mail, tony@...
Publishers of books on railroad history










is there a prototype for the paint scheme on the Carnation reefer?

Claus Schlund \(HGM\)
 

----- Original Message -----
Sent: Thursday, April 18, 2019 1:26 PM
Subject: Re: [RealSTMFC] Throwback Thursday: Athearn Rolling Stock Ad, Model Railroader, December 1962

Richard Townsend wrote:

> A question I have asked before, but never gotten a suitable answer: is there a prototype for the paint scheme on the Carnation reefer?

  Certainly not on the Athearn body. There was a similar though not identical scheme on a pre-1934 billboard car. I suspect Athearn winged it on that one, possibly using current Carnation advertising.

Tony Thompson             Editor, Signature Press, Berkeley, CA
2906 Forest Ave., Berkeley, CA 94705         www.signaturepress.com
(510) 540-6538; e-mail, tony@...
Publishers of books on railroad history









Re: Yeah, More Resin Coming

Charlie Vlk
 

All-

Interesting that a company would develop a website and not state the scale that their product targets.

HO may be a default assumption but there are modelers in other scales….

Charlie Vlk

 

 

RESINATOR ALERT: Another way to be separated from your money—New Resin Company launches—http://nationalscalecar.com/


 


Re: Throwback Thursday: Athearn Rolling Stock Ad, Model Railroader, December 1962

Tony Thompson
 

Richard Townsend wrote:

A question I have asked before, but never gotten a suitable answer: is there a prototype for the paint scheme on the Carnation reefer?
Certainly not on the Athearn body. There was a similar though not identical scheme on a pre-1934 billboard car. I suspect Athearn winged it on that one, possibly using current Carnation advertising.

Tony Thompson Editor, Signature Press, Berkeley, CA
2906 Forest Ave., Berkeley, CA 94705 www.signaturepress.com
(510) 540-6538; e-mail, tony@...
Publishers of books on railroad history


Re: Throwback Thursday: Athearn Rolling Stock Ad, Model Railroader, December 1962

Richard Townsend
 

A question I have asked before, but never gotten a suitable answer: is there a prototype for the paint scheme on the Carnation reefer?


new email and Facebook page

 

Because of hackers I’ve had to start from scratch.  My new email address is almmr87@....  My new Facebook page is Al Westerfield, with a top photo of 2 freight cars, and my photo superimposed.  Any of my Facebook friends, will you please send friend requests, so I can get back up to speed.  Thanks. – Al Westerfield

 

Sent from Mail for Windows 10

 

From: Michael Gross
Sent: Thursday, April 18, 2019 8:40 AM
To: main@RealSTMFC.groups.io
Subject: Re: [RealSTMFC] Chicagoland FGEX Reefer

 

Very nicely done, and very innovative!
--
Michael Gross
Pasadena, CA

 


Re: Chicagoland FGEX Reefer

Michael Gross
 

Very nicely done, and very innovative!
--
Michael Gross
Pasadena, CA


Re: Throwback Tuesday: Varney Metal Freight Car Kits

 

To populate my new layout, I pick up freight cars with Kadee couplers at train shows.  I try to keep the average at about $4.00 apiece.  One was a Varney metal box car, at least 65 years old.  It took some doing to get the car to NMRA standards, but it runs fine now, and looks acceptable. – Al Westerfield

 

Sent from Mail for Windows 10

 

From: Benjamin Hom
Sent: Thursday, April 18, 2019 7:37 AM
To: main@RealSTMFC.groups.io
Subject: Re: [RealSTMFC] Throwback Tuesday: Varney Metal Freight Car Kits

 

Lee Thwaits asked:
"My first kits were Varney wood & cardboard & Mantua metal.  When did Varney switch to metal?"


A check of Varney catalogs at HO Seeker shows the wood and cardboard kits (with stamped metal doors and ends and embossed sides) still listed in the 1948 catalog, but the 1950 catalog shows the metal kits.
https://www.hoseeker.net/varneymiscellaneous.html  

 

 

Ben Hom 

 

 

 


Re: Throwback Tuesday: Varney Metal Freight Car Kits

Benjamin Hom
 

Lee Thwaits asked:
"My first kits were Varney wood & cardboard & Mantua metal.  When did Varney switch to metal?"

A check of Varney catalogs at HO Seeker shows the wood and cardboard kits (with stamped metal doors and ends and embossed sides) still listed in the 1948 catalog, but the 1950 catalog shows the metal kits.
https://www.hoseeker.net/varneymiscellaneous.html  


Ben Hom 



Re: Chicagoland FGEX Reefer

Dennis Storzek
 

On Wed, Apr 17, 2019 at 05:53 PM, skibbs4 wrote:
That’s clever with the scribed styrene instead of carving! Nice work, Bob. 
 
That is a clever idea, and the evergreen stock should match well, as I more or less copied the Evergreen grove dimensions when I designed that tool. I might point out that Evergreen "car siding" would be closer for the board width, but it matters little for those narrow panels.

It also occurs to me that harvesting portions of an extra side would be a dead on match for the siding AND include the siding retainer strip along the bottom edge. We do sell extra sides, #420 (yellow) or #421 (white) $2.99 pair, halfway down the parts page on the left: Accurail Parts The Evergreen siding is still likely easier for the ends.

Dennis Storzek 
Accurail, Inc.


Throwback Thursday: Athearn Rolling Stock Ad, Model Railroader, December 1962

Benjamin Hom
 

Athearn rolling stock ad from the December 1962 issue of Model Railroader.


Ben Hom


Re: Chicagoland FGEX Reefer

Lester Breuer
 

Bob a fine model.  Thank you for sharing your method to replace molded on details without carving.  Clever!
Lester Breuer


Re: Chicagoland FGEX Reefer

gtws00
 

Nicely done! Nice solution to the problem of carving off details.
Thanks for sharing
George Toman


Yeah, More Resin Coming

Bill Welch
 

RESINATOR ALERT: Another way to be separated from your money—New Resin Company launches—http://nationalscalecar.com/

Bill Welch


Re: Chicagoland FGEX Reefer

O Fenton Wells
 

Well done Bob, nice innovative solution to the issue and the finished product looks great.
Fenton

On Wed, Apr 17, 2019 at 9:10 PM Tony Thompson <tony@...> wrote:
Your model looks excellent, Bob, no reason to apologize.
Tony Thompson 


On Apr 17, 2019, at 5:12 PM, Bob Chapman <chapbob611@...> wrote:

In recent years, the folks at the Chicagoland RPM have presented a kit or minikit to registrants, allowing them to model a freight car not commercially available. The 2018 minikit was a truss-rod FGEX reefer, comprised of an Accurail carbody, a custom sheet of cast resin details, and custom decals.


Attached is my result -- built as a "layout model" (no museum-quality modeling here!) For the most part, I followed the Chicagoland instructions, with one exception. I have never had luck in scraping off cast-on ladders and grabs from a double-sheathed carbody. No matter how careful, I can't seem to avoid at least one gouge, and almost always end up with ghosts of the ladder rungs and grabs showing in the siding grooves. For this model, I replaced the siding on the ends and under the side ladders and grabs with #2040 Evergreen siding. I shimmed the replacement siding on the sides with .040"-thick styrene strip spacers. The replacement siding on the ends was slightly thinned, then laminated atop the original end siding.


A big thanks to Mike Skibbe, Frank Houdina, Tom Madden, and Ted Culotta, who made the kit possible.     


Regards,

Bob Chapman  

<FGEX 1+.jpg>
<FGEX End 1.JPG>



--
Fenton Wells
250 Frye Rd
Pinehurst NC 28374
910-420-8106
srrfan1401@...