Date   

Re: CNW 50' oddball

radiodial868
 

The rivet decal backing won't show with a little weathering. I think that looks fine.  As for the lower patch belt. Ouch...

Tim's idea about the mylar sheet is a good one. Right amount of flex and stiffness and thickness.  

Yep, experience comes through the skin.  I've salvaged worse! (many times unfortunately) Throw that bad boy in some Simple Green and take another whack at it!

RJ Dial


Re: Univ of KY archives

Jon Miller <atsfus@...>
 

On 6/12/2019 7:23 PM, rwitt_2000 via Groups.Io wrote:
I searched using "railroad car"

Found this one.

    I find the way the rod is held in the stake pocket interesting.

-- 
Jon Miller
For me time stopped in 1941
Digitrax  Chief/Zephyr systems, JMRI User
SPROG User
NMRA Life member #2623
Member SFRH&MS


Re: Photo: Union Tank Line 6564

rwitt_2000
 

David,

Many of the professional/studio photographers took these railroad photos for damage claims.

Regards,

Bob Witt


Re: Univ of KY archives

rwitt_2000
 


Photo: Union Tank Line 6564

David
 

It appears that one of the bands on the tank body has come loose.
No, that's a handhold for climbing onto the top of the tank body. You can barely see a foothold further down on the strap.

David Thompson


Re: Photo: Union Tank Line 6564

Don Burn
 

New Orleans Great Northern see http://www.msrailroads.com/NOGN.htm

Don Burn

-----Original Message-----
From: main@RealSTMFC.groups.io [mailto:main@RealSTMFC.groups.io] On Behalf Of Donald B. Valentine via Groups.Io
Sent: Wednesday, June 12, 2019 9:08 PM
To: main@realstmfc.groups.io
Subject: Re: [RealSTMFC] Photo: Union Tank Line 6564

The heck with the tank car, Bob. How about the neat Rutand 34 ft. boxcar ahead of it? I've seen documentation of these in the car accountant's book but this it the first photo to turn up. Look also at the cattle car ahead of the Rutland boxcar. I make

the reporting marks out to be NOGN but have no idea what road the miht be. New Orleans and something possibly? I's like to see that herald on the far end of the car more clearly. It looks like a new one not seen before as well.

My best, Don Valentine


Re: Photo: Union Tank Line 6564

Donald B. Valentine <riverman_vt@...>
 

    The heck with the tank car, Bob. How about the neat Rutand 34 ft. boxcar ahead of it? I've seen documentation of these in
the car accountant's book but this it the first photo to turn up. Look also at the cattle car ahead of the Rutland boxcar. I make
the reporting marks out to be NOGN but have no idea what road the miht be. New Orleans and something possibly? I's like
to see that herald on the far end of the car more clearly. It looks like a new one not seen before as well.

My best, Don Valentine


Photo: Union Tank Line 6564

Bob Chaparro
 

Photo: Union Tank Line 6564

A photo from the University of Kentucky Library Archives:

https://exploreuk.uky.edu/catalog/xt7sf7664q86_6013_1?q=train&f%5Bformat%5D%5B%5D=images&offset=320&per_page=20

It appears that one of the bands on the tank body has come loose.

There are several other freight cars pictured but with less detail.

The photo can be enlarged quite a bit and the details brought out with a photo editing program.
A tip of the hat to Tim O'Connor for publishing an original link to the archives.

Bob Chaparro

Hemet, CA


Re: Univ of KY Digital Archives

Charles Peck
 

It looks like cardboard for recycling to me.  Perhaps part of the WW II war effort?
Chuck Peck

On Wed, Jun 12, 2019 at 7:40 PM Tim O'Connor <timboconnor@...> wrote:

Before cushion underframes and DF belt rails - look how liquor was shipped in a box car!

https://exploreuk.uky.edu/catalog/xt7z348gg90h_5_365?q=freight+car&offset=300&per_page=100

Tim O'



On 6/12/2019 4:47 PM, Bill Welch wrote:

Here is link for L&N gon: https://exploreuk.uky.edu/catalog/?q=gondola

There are several photos. This is actually one of one thousand USRA copies purchased by the L&N. The clues are the cast side frame trucks instead of Andrews and their lack of diagonal braces on the end panels. Easily modeled with the very fines InterMountain kit. Attached is a photo of models of both original and copy.

Bill Welch

Attachments:


Re: Univ of KY archives

Tim O'Connor
 

billboard advertising on an NWX reefer, freshly applied in 1932

https://exploreuk.uky.edu/catalog/xt702v2c8t1s_1086_1?q=freight+car&offset=500&per_page=100


--
*Tim O'Connor*
*Sterling, Massachusetts*


Re: Univ of KY Digital Archives

Tim O'Connor
 


Before cushion underframes and DF belt rails - look how liquor was shipped in a box car!

https://exploreuk.uky.edu/catalog/xt7z348gg90h_5_365?q=freight+car&offset=300&per_page=100

Tim O'



On 6/12/2019 4:47 PM, Bill Welch wrote:
Here is link for L&N gon: https://exploreuk.uky.edu/catalog/?q=gondola

There are several photos. This is actually one of one thousand USRA copies purchased by the L&N. The clues are the cast side frame trucks instead of Andrews and their lack of diagonal braces on the end panels. Easily modeled with the very fines InterMountain kit. Attached is a photo of models of both original and copy.

Bill Welch

Attachments:

_._,_._,_

--
Tim O'Connor
Sterling, Massachusetts


Re: CNW 50' oddball

Tim O'Connor
 


And other materials, when .005 styrene is too thick...

All of these can be cut with scissors or a rotary cutter:

1. mylar
2. plastic tape from a thermal label maker (prints onto the plastic tape) -
   it's very thin, takes paint, has a sticky backing
3. HVAC aluminum foil (thicker than kitchen foil, has a sticky backing)

Tim O'Connor





 6/12/2019 6:34 PM, Bruce Smith wrote:

Clark,


Suggest to your friend to use bare metal foil or a similar product for the side patch panels. We PRR modelers have a lot of experience with those 😉


Regards,

Bruce Smith

Auburn, AL




From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> on behalf of Clark Propst <cepropst@q.com>
Sent: Wednesday, June 12, 2019 5:12 PM
To: main@RealSTMFC.groups.io
Subject: [RealSTMFC] CNW 50' oddball
 
You may remember few weeks ago a friend wanted to do a model of a box car assigned to one of the cement plants in Mason City ia. He found a P2K kit, I had a couple Des Plaines Viking roofs. A couple weeks later here’s the model. He’s not happy with it. He used to thick of styrene for the lower side patches which be placed too high on the sides. I gave him some styrene strip to hopefully fill the gap. We’ll see? He also used rivets from Micro Mark he got from another friend. They are way too thick leaving a noticeable ‘seam’ behind them. We don’t learn unless we build. He said he’s up to try again with with another kit....
CW Propst


--
Tim O'Connor
Sterling, Massachusetts


Re: CNW 50' oddball

Brian Carlson
 

I do love the door though!

Brian J. Carlson 

On Jun 12, 2019, at 6:12 PM, Clark Propst <cepropst@q.com> wrote:

You may remember few weeks ago a friend wanted to do a model of a box car assigned to one of the cement plants in Mason City ia. He found a P2K kit, I had a couple Des Plaines Viking roofs. A couple weeks later here’s the model. He’s not happy with it. He used to thick of styrene for the lower side patches which be placed too high on the sides. I gave him some styrene strip to hopefully fill the gap. We’ll see? He also used rivets from Micro Mark he got from another friend. They are way too thick leaving a noticeable ‘seam’ behind them. We don’t learn unless we build. He said he’s up to try again with with another kit....
CW Propst
<CNW 27516 1.jpg>
<CNW 27516 2.jpg>


Re: CNW 50' oddball

Bruce Smith
 

Clark,


Suggest to your friend to use bare metal foil or a similar product for the side patch panels. We PRR modelers have a lot of experience with those 😉


Regards,

Bruce Smith

Auburn, AL




From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> on behalf of Clark Propst <cepropst@q.com>
Sent: Wednesday, June 12, 2019 5:12 PM
To: main@RealSTMFC.groups.io
Subject: [RealSTMFC] CNW 50' oddball
 
You may remember few weeks ago a friend wanted to do a model of a box car assigned to one of the cement plants in Mason City ia. He found a P2K kit, I had a couple Des Plaines Viking roofs. A couple weeks later here’s the model. He’s not happy with it. He used to thick of styrene for the lower side patches which be placed too high on the sides. I gave him some styrene strip to hopefully fill the gap. We’ll see? He also used rivets from Micro Mark he got from another friend. They are way too thick leaving a noticeable ‘seam’ behind them. We don’t learn unless we build. He said he’s up to try again with with another kit....
CW Propst


CNW 50' oddball

Clark Propst
 

You may remember few weeks ago a friend wanted to do a model of a box car assigned to one of the cement plants in Mason City ia. He found a P2K kit, I had a couple Des Plaines Viking roofs. A couple weeks later here’s the model. He’s not happy with it. He used to thick of styrene for the lower side patches which be placed too high on the sides. I gave him some styrene strip to hopefully fill the gap. We’ll see? He also used rivets from Micro Mark he got from another friend. They are way too thick leaving a noticeable ‘seam’ behind them. We don’t learn unless we build. He said he’s up to try again with with another kit....
CW Propst


Re: Combining Resin & Styrene

Ray Breyer
 

If you're working with a lot of printed parts and want to cure them, it's probably a good idea to build yourself a simple light box with a UV bulb in it. McMaster-Carr (and others) sell the bulbs in assorted wavelengths.

Ray Breyer
Elgin, IL


On Wednesday, June 12, 2019, 3:50:52 PM CDT, Dennis Storzek <destorzek@...> wrote:


On Wed, Jun 12, 2019 at 08:25 AM, Jack Burgess wrote:

So, if a casting is sticky, putting it out in the sun will solve the problem. The white dots which can appear a month or two after painting is a different problem. Shapeways has not identified the source of the problem AFAIK…

 

I'm of the opinion that it's all the same problem... the stickiness is un-reacted resin on the surface of the part, while the white spots are un-reacted resin migrating from deeper in the part. I'm not entirely sure just how deeply UV will penetrate below the surface of the part, but additional UV exposure of all parts can't hurt.

Dennis Storzek


Re: Combining Resin & Styrene

Dennis Storzek
 

On Wed, Jun 12, 2019 at 08:25 AM, Jack Burgess wrote:

So, if a casting is sticky, putting it out in the sun will solve the problem. The white dots which can appear a month or two after painting is a different problem. Shapeways has not identified the source of the problem AFAIK…

 

I'm of the opinion that it's all the same problem... the stickiness is un-reacted resin on the surface of the part, while the white spots are un-reacted resin migrating from deeper in the part. I'm not entirely sure just how deeply UV will penetrate below the surface of the part, but additional UV exposure of all parts can't hurt.

Dennis Storzek


Re: FW: [EarlyRail] Digital Archives -

Bill Welch
 
Edited

Here is link for L&N gon: https://exploreuk.uky.edu/catalog/?q=gondola

There are several photos. This is actually one of one thousand USRA copies purchased by the L&N. The clues are the cast side frame trucks instead of Andrews and their lack of diagonal braces on the end panels. Easily modeled with the very fines InterMountain kit. Attached is a photo of models of both original and copy. Copies were built by Chickasaw

Bill Welch


Re: FW: [EarlyRail] Digital Archives -

Bill Welch
 

Why not provide a link Charley?

Bill Welch


Re: FW: [EarlyRail] Digital Archives -

John
 

Yes, many nice photos.  Here’s a very clear one of a wood gondola.  But what kind of trucks are those under it?


John Bopp

19401 - 19420 of 184220