Date   

Re: Private: Re: InterMountain HO Scale 1937 AAR Boxcars with Square Corners

James E Kubanick
 

Please ignore my previous email as it was meant to go only to the local MRR club.

Jim Kubanick

On Sunday, June 30, 2019, 10:17:18 AM EDT, vapeurchapelon <j.markwart@...> wrote:


Hello Tim,
 
many thanks! Will save that mail and use when needed.
 
Johannes
Modeling the early post-war years up to about 1953
 
Gesendet: Samstag, 29. Juni 2019 um 18:30 Uhr
Von: "Tim O'Connor" <timboconnor@...>
An: "George Toman" <gtws00@...>, main@RealSTMFC.groups.io
Betreff: Re: [RealSTMFC] Private: Re: InterMountain HO Scale 1937 AAR Boxcars with Square Corners

George asked me offline but in case anyone else is not aware -

GROUPS.IO makes searching the archive 100x more convenient than the old Yahoo search.

Here is a simple search for DURYEA - 662 messages founded instantly.

https://realstmfc.groups.io/g/main/search?q=duryea

Tim O'Connor


===============================


On 6/29/2019 7:28 AM, George Toman wrote:
Morning Tim,
 
Could you tell me what you mean by the STMFC Archive and how I may access it?
 
Thanks
 
George Toman 
 

--
Tim O'Connor
Sterling, Massachusetts


Re: Photos: Many Early 1900s Freight Cars

Eric Lombard
 

Thanks for sharing the further information on the images, Dave. It clarifies things a bit and that helps. 
Eric

On Sat, Jun 29, 2019 at 4:35 PM Dave Parker via Groups.Io <spottab=yahoo.com@groups.io> wrote:
The same link was posted over on the B&M group, where Scott Whitney subsequently claimed ownership of the Dropbox account (part of his NMRO operation).

Almost all of the same images have been released on a CD by a company called WLHG out of Methuen, MA (purchased mine through ebay).  Those images have a WLHG watermark (and are all in sepia tones).

As to any IP or copyright issues, or whom to credit for the photos, well....

Dave Parker
Riverside, CA


Wartime reefers on Cajon

John Barry
 

In one of the few instances where I would point you at Shorpy rather than the original at the Library of Congress is a retouched version of Jack Delano's color photo of a UP Challenger at Alray with a string of reefers, hatches open for ventilation.  https://www.shorpy.com/files/images/1a34754u2.jpg

The original scan at LOC has a crack/tear that runs diagonally across most of the photo https://cdn.loc.gov/service/pnp/fsac/1a34000/1a34700/1a34754v.jpg.  You can see where it has been repaired in the Shorpy with a slight distortion of the corner adjacent to the NP Monad on the second car.  

In both versions, the color balance seems "right" to me based on the shed and station sign.  That said, I'm surprised by how "yellow" the 2nd PFE car appears, I would have expected a more orange hue.  Perhaps it faded through exposure and washings.  It must be on it's first trip after a pass through the wash line as it has no weathering.  Contrast the ART behind it with the heavy coat of grime and wear around the grabs.  Also of note in the 1943 image, is that both of the visible PFE's have the UP Overland Herald, even though the "plain" color Herald became the standard in 42.  Further evidence that the clean car was recently washed and not repainted.  The other interesting observation is that only 40% of the visible cars are PFE in what looks like a GFX block originating with the UP in SoCal:  PFE, NP, PFE, ART, BREX.  It looks as if the order "pooling" the refrigerator car fleet has been fully implemented here.

John Barry
 
ATSF North Bay Lines 
Golden Gates & Fast Freights 
Lovettsville, VA

707-490-9696 

PO Box 44736 
Washington, DC 20026-4736


Re: Duryea underframe resin parts photo

John Barry
 

Tom,

The original Duryea design had "open" cross bearers as shown in the photo on Gene's proto 48 blog https://www.proto48.org/images/articles/art07-07-1500.jpg. The Bx-26 class built in 1936 and the Bx-27 built in 1937 were delivered in that configuration.  At some time prior to the Bx-34 class constructed in 1940, the design was "improved" with "closed" pressed steel cross bearers.  John Dobyne speculates that it was due to a structural weakness in the "open" frames.  This seems likely, as at some point, Santa Fe welded steel plates between the upper and lower pieces of the cross bearers on the Bx-26 & 27.  The Speedwitch kit correctly models the fiddly bits of the "early" aka "open" underframe with separate parts for the vertical angle irons that you the modeler add during assembly.  The Sunshine has these cast integrally with the rest of the cross bearer.  

Several plastic manufacturers have also produced models with Duryea underframes.  The Tangent riveted gondola has excellent extended coupler pockets that are sometimes available as part of separate sprues.  They offer a quick and easy way to improve the look of a Bx-27 or 34 without replacing the rest of the underframe.  Athearn makes a very nice 50' "closed" Duryea underframe that is under their 50 foot Santa Fe ice reefer.  That can be cut and spliced to work for a complete late 40' underframe. 


John

John Barry
 
ATSF North Bay Lines 
Golden Gates & Fast Freights 
Lovettsville, VA

707-490-9696 

PO Box 44736 
Washington, DC 20026-4736


On Saturday, June 29, 2019, 03:11:44 PM EDT, Tom Madden via Groups.Io <pullmanboss@...> wrote:


Here's an image showing the Sunshine and Pennington Duryea underframe mini-kit parts, and the Speedwitch B&O M-26D/E and ATSF Bx-26 Duryea parts. They are all different. As Bill Darnaby mentioned, the Sunshine set will build either the early or late versions, however that's defined.The Speedwitch Santa Fe set has a couple pieces missing because the car is under construction, but the cross-members are shown. 

Tom Madden


Re: looking for drawings of Reading hopper 60000 - 60999

Bob Webber
 

In the FWIW dept. we *should* have the Middleton Car drawings.  St. Louis *MAY* have the AC&F drawings.   We haven't really looked for anything Middleton for a couple of years, might be entertaining to look.

We have early (1904-1909) P&R drawings for box cars, gondolas & hoppers - those were all Standard Steel tho. 

At 09:21 AM 6/30/2019, vapeurchapelon wrote:

60600-60799 May-Sep by Middletown Car Works

Bob Webber


Re: looking for drawings of Reading hopper 60000 - 60999

vapeurchapelon
 

Hello Steve,
 
many thanks for the link! Saved it, and eventually I will contact Eric.
 
Johannes
Modeling the early post-war years up to about 1953
 
Gesendet: Samstag, 22. Juni 2019 um 21:16 Uhr
Von: "steve_wintner via Groups.Io" <steve_wintner@...>
An: main@RealSTMFC.groups.io
Betreff: Re: [RealSTMFC] looking for drawings of Reading hopper 60000 - 60999
I found this website : http://www.ericsrailroadcarhistory.com/

Maybe of use to you.

Steve


Re: looking for drawings of Reading hopper 60000 - 60999

vapeurchapelon
 

Hello Tony,
 
this definitely helps! Many thanks!
 
Johannes
Modeling the early post-war years up to about 1953
 
Gesendet: Samstag, 22. Juni 2019 um 22:40 Uhr
Von: "anthony wagner" <anycw1@...>
An: main@RealSTMFC.groups.io
Betreff: Re: [RealSTMFC] looking for drawings of Reading hopper 60000 - 60999
 
According to the Reading Modeler site HTb 60000-60599 were built Mar-Aug 1902 by ACF, 60600-60799 May-Sep by Middletown Car Works, and 60800-60999 May-Sep 1902 by Lebanon Manufacturing. 864 cars were rebuilt Feb-Oct 1921 to 61000-61863 HTk by ACF with steel center sills but still with 40Ton Fox trucks. They were retired between 1927 and 1934 but 264 cars were converted to ash service as HTkx in the 90000 and 91000 series except 4 cars sold to Atlantic City Railway in 1927 as 10261-10263 HTkx ash cars. Hope this helps Tony Wagner

On Saturday, June 22, 2019, 2:17:01 PM CDT, steve_wintner via Groups.Io <steve_wintner@...> wrote:
 
 
I found this website : http://www.ericsrailroadcarhistory.com/

Maybe of use to you.

Steve


Re: Private: Re: InterMountain HO Scale 1937 AAR Boxcars with Square Corners

vapeurchapelon
 

Hello Tim,
 
many thanks! Will save that mail and use when needed.
 
Johannes
Modeling the early post-war years up to about 1953
 
Gesendet: Samstag, 29. Juni 2019 um 18:30 Uhr
Von: "Tim O'Connor" <timboconnor@...>
An: "George Toman" <gtws00@...>, main@RealSTMFC.groups.io
Betreff: Re: [RealSTMFC] Private: Re: InterMountain HO Scale 1937 AAR Boxcars with Square Corners

George asked me offline but in case anyone else is not aware -

GROUPS.IO makes searching the archive 100x more convenient than the old Yahoo search.

Here is a simple search for DURYEA - 662 messages founded instantly.

https://realstmfc.groups.io/g/main/search?q=duryea

Tim O'Connor


===============================


On 6/29/2019 7:28 AM, George Toman wrote:
Morning Tim,
 
Could you tell me what you mean by the STMFC Archive and how I may access it?
 
Thanks
 
George Toman 
 

--
Tim O'Connor
Sterling, Massachusetts


Rare Find

David
 

https://www.loc.gov/pictures/collection/det/item/2016813911/

The hopper on the right is is one of 1100 PRR class GL built by AC&F on Lot 2571, presumably because Pressed Steel couldn't get their orders out the door fast enough. AC&F also built 300 GL for Lines West on Lot 2856.

David Thompson


Re: Photos: Many Early 1900s Freight Cars

Dave Parker
 

The same link was posted over on the B&M group, where Scott Whitney subsequently claimed ownership of the Dropbox account (part of his NMRO operation).

Almost all of the same images have been released on a CD by a company called WLHG out of Methuen, MA (purchased mine through ebay).  Those images have a WLHG watermark (and are all in sepia tones).

As to any IP or copyright issues, or whom to credit for the photos, well....

Dave Parker
Riverside, CA


Re: Photos: Many Early 1900s Freight Cars

Eric Lombard
 

Thanks, Bob. You made a happy discovery of a collection that someone assembled in a dropbox folder. Thanks for sharing it. There are some photos that shed light on the construction details and builder of some of the cars included and those sorts of small bits of the bigger picture are always gratefully received.

Eric

On Sat, Jun 29, 2019 at 2:43 PM Bob Chaparro via Groups.Io <chiefbobbb=verizon.net@groups.io> wrote:
They appeared from an Internet search as a Dropbox file. As I stated, there are no annotations to accompany the photos.
Bob


Photo: Mobile Reefer Icing Of GARX 67664 (Rock Island)

Bob Chaparro
 

Photo: Mobile Reefer Icing Of GARX 67664 (Rock Island)

A photo from the Three Rivers Parks District:

https://threerivers-drupal.s3.us-east-2.amazonaws.com/public/inline-images/Internal%20-%20historic%20car%20icing%20service.jpg

Bob Chaparro

Hemet, CA


Re: Photos: Many Early 1900s Freight Cars

Bob Chaparro
 

They appeared from an Internet search as a Dropbox file. As I stated, there are no annotations to accompany the photos.
Bob


Re: Atlas NE-6 caboose

Bryian Sones
 

Dave,

FYI there is an undecorated Nickle Plate version on Ebay. It would save you the hassle of striping it and maybe an easier process to disassemble.



Kind Regards
 

Bryian Sones
Union Pacific Prototype Modeler
Murrieta, CA


On ‎Saturday‎, ‎June‎ ‎29‎, ‎2019‎ ‎09‎:‎38‎:‎12‎ ‎AM‎ ‎PDT, Dave Lawler <davelawler@...> wrote:


Good day all,
I'm thinking of buying an Atlas Master Series NE-6 caboose but I would need to strip and repaint it.
Has anyone taken one of these apart? Is it simple like screwed together or is it all glued and impossible to
disassemble? Thank you for any help.
Dave Lawler


Duryea underframe resin parts photo

Tom Madden
 

Here's an image showing the Sunshine and Pennington Duryea underframe mini-kit parts, and the Speedwitch B&O M-26D/E and ATSF Bx-26 Duryea parts. They are all different. As Bill Darnaby mentioned, the Sunshine set will build either the early or late versions, however that's defined.The Speedwitch Santa Fe set has a couple pieces missing because the car is under construction, but the cross-members are shown. 

Tom Madden


Re: Photos: Many Early 1900s Freight Cars

Eric Lombard
 

Who/what should be cited as the source for the photos? Are they from your private collection? From a website? Institution?

On Sat, Jun 29, 2019 at 12:02 PM Eric Lombard <elombard@...> wrote:
Bob, what is the source of these photos? 

Eric Lombard
Homewood, IL

On Wed, Jun 26, 2019 at 8:23 AM Bob Chaparro via Groups.Io <chiefbobbb=verizon.net@groups.io> wrote:

Photos: Many Early 1900s Freight Cars

A little more than 100 photos of mostly (maybe all) Laconia Car Company freight cars, starting here:

https://www.dropbox.com/sh/evgwchtr9495b37/AADFM2TnOtSxVZS9njXK60n2a?dl=0&preview=001.jpg

Unfortunately, there are no annotations to accompany the photos.

Bob Chaparro

Hemet, CA


Re: Photos: Many Early 1900s Freight Cars

Eric Lombard
 

Bob, what is the source of these photos? 

Eric Lombard
Homewood, IL

On Wed, Jun 26, 2019 at 8:23 AM Bob Chaparro via Groups.Io <chiefbobbb=verizon.net@groups.io> wrote:

Photos: Many Early 1900s Freight Cars

A little more than 100 photos of mostly (maybe all) Laconia Car Company freight cars, starting here:

https://www.dropbox.com/sh/evgwchtr9495b37/AADFM2TnOtSxVZS9njXK60n2a?dl=0&preview=001.jpg

Unfortunately, there are no annotations to accompany the photos.

Bob Chaparro

Hemet, CA


Re: Private: Re: InterMountain HO Scale 1937 AAR Boxcars with Square Corners

gtws00
 

That makes for a simple search.
Thanks for the info
George Toman


Re: ATSF BX-26 Duryea underframe

Norm Buckhart
 

Both Gene Diemling and John Barry have produced excellent tutorals on building Santa Fe Bx 37 (I believe) boxcars with Duryea underframes.  Genes car was in O scale and John's in HO. I have these at home but am stuck in a hotel while a major plumbing retrofit is taking place in our building.

Gene's may be found on his blog.

Bill Pardie

Bx-26, 27, 34 were all built with Duryea u/f’s.  Bx-37 had a conventional u/f and was the only class in this group to have transverse mounted air reservoirs.
norm buckhart


On Jun 29, 2019, at 10:11 AM, WILLIAM PARDIE <PARDIEW001@...> wrote:



Sent from my Verizon, Samsung Galaxy smartphone

-------- Original message --------
From: James SANDIFER <steve.sandifer@...>
Date: 6/29/19 6:45 AM (GMT-10:00)
Subject: [RealSTMFC] ATSF BX-26 Duryea underframe

Found this on the internet:

https://www.rmweb.co.uk/community/index.php?/topic/89134-st-louis-collinsville-rpm-photos-posted/&tab=comments#comment-1551161

https://www.proto48.org/images/articles/art07-07-1500.jpg

https://myp48.wordpress.com/2018/03/14/modeling-rehab-an-older-model/

https://www.proto48.org/p48_art_07.htm

 

 

 

J. Stephen Sandifer

 

From: main@RealSTMFC.groups.io [mailto:main@RealSTMFC.groups.io] On Behalf Of James SANDIFER
Sent: Saturday, June 29, 2019 10:38 AM
To: main@RealSTMFC.groups.io
Subject: Re: [RealSTMFC] InterMountain HO Scale 1937 AAR Boxcars with Square Corners

 

It would be helpful if someone would post plans for the Santa Fe Duryea or photos of the Speedwitch car underbody.

 

 

J. Stephen Sandifer

 

From: main@RealSTMFC.groups.io [mailto:main@RealSTMFC.groups.io] On Behalf Of Tom Madden via Groups.Io
Sent: Friday, June 28, 2019 11:11 PM
To: main@RealSTMFC.groups.io
Subject: Re: [RealSTMFC] InterMountain HO Scale 1937 AAR Boxcars with Square Corners

 

I found two different types in my stash. One is a Sunshine mini-kit, "Rock Island Duryea Underframe, Superior Door, Decals for 10'6" IH Boxcar", and a set for a Frisco boxcar marketed for a short time by a modeler whose name escapes me. It's "#37DUR FRISCO BOXCAR U'FRAME & DOORS", and on the back of the package it says "CAST RESIN PARTS TO MODEL SL-SF 1937 AAR BOX CAR WITH DURYEA UNDER FRAME. USE WITH RED CABOOSE #RC-8001 BOXCAR KIT."

As mentioned there's the Speedwitch B&O M-26D/E kit, and also the Speedwitch Santa Fe Bx-26 boxcar kit, which also has a Duryea underframe. Haven't compared the two to see if they're different.

Tom Madden




Re: Mid-Century Boxcars & Boxcar Models

Benjamin Hom
 

Bob Chaparro wrote:
"Mid-Century Boxcars & Boxcar Models
In case some of you have not seen this document from the Fox Valley Division of the NMRA:
http://www.foxvalleydivision.org/fvd2016/imagesfvd2016/clinicdata/Mid-Century%20Boxcars%20V2.pdf 

One lesson is apparent...have someone proofread your clinic!


Ben Hom

22201 - 22220 of 187390