Date   
Re: Steam line placement on express box cars

Tim O'Connor
 

Steve

If you can scan and share it, please do! I have a couple of Sunshine kits to build.

Tim O'Connor


On 9/25/2019 1:46 AM, passcars via Groups.Io wrote:
The SP drawing for steam line application and conditions for B-50-24 BX box express cars is SF-33427.  I may have a copy. Alternative is the Green Library at Stanford University, California.
Steve Peery

--
Tim O'Connor
Sterling, Massachusetts

Re: Some may enjoy this image of boxcar PRR 100247

Charlie Vlk
 

Claus-

The link doesn’t seem to work.

Thanks,
Charlie

 

From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> On Behalf Of Claus Schlund \(HGM\)
Sent: Wednesday, September 25, 2019 10:25 AM
To: STMFC <main@RealSTMFC.groups.io>
Subject: [RealSTMFC] Some may enjoy this image of boxcar PRR 100247

 

Hi,

 

Some may enjoy this image of boxcar PRR 100247, PRR class XL.

 

 

I don't think I have ever seen this particular arrangement of lettering before on PRR equipment.

 

Enjoy!

 

Claus Schlund

 

Re: Cool DD SAL 40' AAR box car

Tim O'Connor
 

David

Yes, I see my notes show them with rectangular panel roofs

the question is, who made the ends? did MV produce ends like that?

On 9/24/2019 5:20 PM, David via Groups.Io wrote:
There were 500 cars built in 1948. The ends look like ACF proprietary ends.
If so, I wonder if the roofs also used the ACF proprietary design.
SAL 23000-23499 were built at Mount Vernon in 6/48, so probably not.

David Thompson
--
*Tim O'Connor*
*Sterling, Massachusetts*

Some may enjoy this image of boxcar PRR 100247

Claus Schlund \(HGM\)
 

Hi,
 
Some may enjoy this image of boxcar PRR 100247, PRR class XL.
 
 
I don't think I have ever seen this particular arrangement of lettering before on PRR equipment.
 
Enjoy!
 
Claus Schlund
 

Re: Steam line placement on express box cars

passcars
 

The SP drawing for steam line application and conditions for B-50-24 BX box express cars is SF-33427.  I may have a copy. Alternative is the Green Library at Stanford University, California.
Steve Peery

Buy War Bonds!

John Barry
 

Folks, 

Peter Aue created original artwork and made a set of Buy War Bonds decals for me a couple years ago.  With the recent discussion we have teamed to offer HO versions of the slogan applied to 368 Bx-36 rebuilds.  If you would like to add this iconic billboard slogan to one of your STMFC freight cars, contact me OFF LIST at NORTHBAYLINES at ATT dot NET before 10 October with how many sets you would like. 

 

The decal set will include three copies (two plus a spare) of the slogan seen above (in gray for illustration, the decal is printed in in white).  This is only the slogan, as an add on to your choice of commercially available decals.  Cost is $3.00 per set, postage paid in the US.  The decals will be printed to order in Germany and delivered mid-November by First Class mail.

John Barry
 
ATSF North Bay Lines 
Golden Gates & Fast Freights 
Lovettsville, VA

707-490-9696 

PO Box 44736 
Washington, DC 20026-4736

Re: Cool DD SAL 40' AAR box car

Allan Smith
 

SAL 23000-23499 had Murphy raised panel roofs without raised panels under the running board laterals.

Al Smith
Sonora CA

On Tuesday, September 24, 2019, 02:20:35 PM PDT, David via Groups.Io <jaydeet2001@...> wrote:


> There were 500 cars built in 1948. The ends look like ACF proprietary
> ends.
> If so, I wonder if the roofs also used the ACF proprietary design.

SAL 23000-23499 were built at Mount Vernon in 6/48, so probably not.

David Thompson




Cool DD SAL 40' AAR box car

David
 

There were 500 cars built in 1948. The ends look like ACF proprietary ends.
If so, I wonder if the roofs also used the ACF proprietary design.
SAL 23000-23499 were built at Mount Vernon in 6/48, so probably not.

David Thompson

Re: Youngstown Sheet & Tube tank car

Donald B. Valentine
 

Thank you Todd. That's what I was thinking too and made most famous by Johnny Cash's rendition of it on
Sam Phillips Sun label.

Cordially, Don Valentine

Re: Cool DD SAL 40' AAR box car

O Fenton Wells
 

Chad Boas makes the ends, doors and the sill supports for this car.  


On Mon, Sep 23, 2019 at 2:05 PM Andy Carlson <midcentury@...> wrote:
Good Morning everyone-

Seaboard Air Lines 40' AAR box car, SAL 23307.

I forgot where I stole this picture from (It is a screen shot) but it is cool. Built in 1948, it would probably have a rectangular panel roof. With the 4/4 Dartnaught ends and what appears to me to be 13' door opening (one each 7' and 6' 5/6/6 IYSD) this is a unique 10'6" box car.  Kato A3 ride control trucks and a side sill addition to a Branchline 6' single door AAR kit with a Red Caboose Murphy roof. Could be a cool weekend model project.

-Andy Carlson
Ojai CA





--
Fenton Wells
250 Frye Rd
Pinehurst NC 28374
910-420-8106
srrfan1401@...

Re: Youngstown Sheet & Tube tank car

Todd Sullivan
 

Jack Mullen wrote

"And when the driver think he safely on the other side
  He shouts back down the line to the man and he says
 I fooled you, I fooled you
 I got pig iron, I got pig iron
 I got all pig iron

You just can't mention stock cars and pig iron without invoking Lonnie Donegan."

Or Huddie Ledbetter ('Leadbelly') who originated those lyrics in the the song, "Rock Island Line".

Todd Sullivan

Re: Photo: PRR Flat Car 426837 With Electrical Equipment Load

Todd Horton
 

There's a C of G vent car with the old style lettering coupled to the 2nd flat car. 

Todd Horton


On Sunday, September 22, 2019, 01:07:41 PM EDT, Bob Chaparro via Groups.Io <chiefbobbb@...> wrote:


Photo: PRR Flat Car 426837 With Electrical Equipment Load

An image taken in 1937 from the Detroit Public Library:

https://digitalcollections.detroitpubliclibrary.org/islandora/object/islandora%3A230879

Click on the image and hold to temporarily enlarge it.

Description: View of switching equipment shipment on railroad cars at the Springwells Station treatment plant during construction, Detroit water supply system. Printed on front: "City of Detroit. Department of Water Supply. Division of Engineering. Shipment of switching equipment for temporary switch house from Westinghouse Elect. & Mfg. Co. Springwells Station, spec. PS-110. 4-7-31." Stamped on back: "Manning Bros., commercial photographers. 504-505 Lincoln Building. Corner State and Park Sts., Detroit, Mich."

Bob Chaparro

Hemet, CA

Re: Cool DD SAL 40' AAR box car

Tim O'Connor
 

Andy

There were 500 cars built in 1948. The ends look like ACF proprietary ends.
If so, I wonder if the roofs also used the ACF proprietary design.




On 9/23/2019 2:03 PM, Andy Carlson wrote:
Good Morning everyone-

Seaboard Air Lines 40' AAR box car, SAL 23307.

I forgot where I stole this picture from (It is a screen shot) but it is cool. Built in 1948, it would probably have a rectangular panel roof. With the 4/4 Dartnaught ends and what appears to me to be 13' door opening (one each 7' and 6' 5/6/6 IYSD) this is a unique 10'6" box car.  Kato A3 ride control trucks and a side sill addition to a Branchline 6' single door AAR kit with a Red Caboose Murphy roof. Could be a cool weekend model project.

-Andy Carlson
Ojai CA



Attachments:



--
Tim O'Connor
Sterling, Massachusetts

Cool DD SAL 40' AAR box car

Andy Carlson
 

Good Morning everyone-

Seaboard Air Lines 40' AAR box car, SAL 23307.

I forgot where I stole this picture from (It is a screen shot) but it is cool. Built in 1948, it would probably have a rectangular panel roof. With the 4/4 Dartnaught ends and what appears to me to be 13' door opening (one each 7' and 6' 5/6/6 IYSD) this is a unique 10'6" box car.  Kato A3 ride control trucks and a side sill addition to a Branchline 6' single door AAR kit with a Red Caboose Murphy roof. Could be a cool weekend model project.

-Andy Carlson
Ojai CA



Re: Harvesting Ice from a Lake

Ralph W. Brown
 

Hi Don,
 
Seems to me I’ve a photograph of ice harvesting on one of Maine’s rivers, the Kennebec I think, but I don’t recall where.  I think the photo was taken in the early part of the 20th Century.  I probably have it saved on my computer, but I’ve yet to find it.
 
Pax,
 
 
Ralph Brown
Portland, Maine
PRRT&HS No. 3966
NMRA No. L2532

rbrown51[at]maine[dot]rr[dot]com
 

From: Donald B. Valentine via Groups.Io
Sent: Monday, September 23, 2019 5:13 AM
To: main@realstmfc.groups.io
Subject: Re: [RealSTMFC] Harvesting Ice from a Lake
 
If someone is seriously interested in ice harvesting it is still done on one day in February each winter on the pond
at the center of Brookfield, Vermont, the same pond with the floating bridge, using the same equipment that was
used in years past. Many small country towns in Northern New England had an ice house on such ponds, especially
if there were a creamery in town that shipped milk by rail. The foundations of an ice house can even be found on
Towner's Pond in Melrose, Mass. barely outside of Boston. We had one in Morrisville, VT between the Randolph Rd.
and Ward's Pond that lasted into the 1970's though it had not been used for years. Even the pond is now gone as
it's first purpose was to power Leon Ward's sawmill. After he passed away the dam was breached and a family of
Great Blue Herons that had lived there since I was in grade school lost their habitat.
 
The Rutland RR. had a large ice house in ALburgh, VT on the shore of Lake Champlain not far from the site of
the station in Alburgh where ice was cut and stored for years as well as shipped to other railroad owned ice houses
on the line. The conveyor system for moving the ice from the lake to the ice house was quite elaborate, judging from
the blueprints of it that I have.
 
Cordially, Don Valentine

Re: Harvesting Ice from a Lake

Thomas Evans
 

Ice harvesting & ice houses were also common on western lines before mechanical ice-making became common, especially with all the fruits & vegetables being shipped east from California.

The Santa Fe had a branch from Las Vegas NM up to Montezuma Hot Springs.  Although it started to serve a resort, its main commodity was ice harvested from a series of ponds each winter for several decades & shipped all over the western lines of the Santa Fe.  Natural ice was probably hard to come by along the Santa Fe's desert lines, so this high-altitude shady location may have been one of the few places to get it.  A few of us have been investigating this operation over on the Santa Fe site recently.

Tom

Re: Photo: Wabash Mather Boxcar

Steve and Barb Hile
 

Here are a couple of all wood Mather stock cars that were leased by the Rock Island.  The photo is circa 1917.
 
 
Steve Hile



From: main@RealSTMFC.groups.io [mailto:main@RealSTMFC.groups.io] On Behalf Of Ray Breyer via Groups.Io
Sent: Monday, September 23, 2019 6:09 AM
To: main@realstmfc.groups.io; main@RealSTMFC.groups.io
Subject: Re: [RealSTMFC] Photo: Wabash Mather Boxcar

Mather applied for his first patent in 1880, and was leasing cars by 1883. By 1900 he had over 1,500 cars in operation. The company's first cars with steel side framing don't appear until around 1915.

For circa 1900 Mather stock cars and the company's typical construction, see the following images:
Ray Breyer
Elgin, IL


On Monday, September 23, 2019, 03:57:13 AM CDT, Donald B. Valentine via Groups.Io <riverman_vt@...> wrote:


Hi folks, 

    Can't recall, when did Mather really get it's start? This is the first Mather car I've seen that has not utilized
commonly available steel channels, angles and such. It appears that they were building wood framed cars in 
much the same way but from how early a date?

Cordially, Don Valentine

Re: [Non-DoD Source] [RealSTMFC] Various Steel Industry Loads

Gatwood, Elden J SAD
 

Bob;

Thanks for that fabulous photo!

Though out of our era, it has many details we can learn from: ladles were shipped this way from Pollock, on high and wide trains. Note the overhang of the ladles in back loaded upside down. The even larger ones in front look they are for a BOP/BOF shop, while those in back look like teeming ladles without the control assembly installed.

The banded steel sheet on dunnage is standard practice. A very nice shot of this type of load (have modeled many of these).

Uncovered coiled steel sheet was common(er) on Erie, NYC and P&LE due to their customers' needs. They have been banded nicely.

Those anti-skid bumpers were a feature of at least one Lot of P&LE flat cars.

This looks like the way I remember Youngstown, when their mills were still in full swing. Note expansion loops on hot gas pipeline to right. Could this be Youngstown Sheet & Tube's interchange yard?

Elden Gatwood

-----Original Message-----
From: main@RealSTMFC.groups.io [mailto:main@RealSTMFC.groups.io] On Behalf Of Bob Chaparro via Groups.Io
Sent: Saturday, September 21, 2019 2:13 PM
To: main@RealSTMFC.groups.io
Subject: [Non-DoD Source] [RealSTMFC] Various Steel Industry Loads

Various Steel Industry Loads

An undated photo from the Ohio Memory website:

Blockedhttps://ohiomemory.org/digital/collection/p15005coll10/id/2993/rec/13 <Blockedhttps://ohiomemory.org/digital/collection/p15005coll10/id/2993/rec/13>

Description: "Ladles loaded on train cars for shipment made by the William B. Pollock Company."

Also visible are loads of steel coils, beams and plates.

And my thanks to Claus Schlund for finding the Ohio Memory website.

Bob Chaparro

Hemet, CA

Re: Photo: Wabash Mather Boxcar

Ray Breyer
 

Mather applied for his first patent in 1880, and was leasing cars by 1883. By 1900 he had over 1,500 cars in operation. The company's first cars with steel side framing don't appear until around 1915.

For circa 1900 Mather stock cars and the company's typical construction, see the following images:
Ray Breyer
Elgin, IL


On Monday, September 23, 2019, 03:57:13 AM CDT, Donald B. Valentine via Groups.Io <riverman_vt@...> wrote:


Hi folks, 

    Can't recall, when did Mather really get it's start? This is the first Mather car I've seen that has not utilized
commonly available steel channels, angles and such. It appears that they were building wood framed cars in 
much the same way but from how early a date?

Cordially, Don Valentine

Re: Photo: Wabash Mather Boxcar

Benjamin Hom
 

Don Valentine asked:
"Can't recall, when did Mather really get its start? This is the first Mather car I've seen that has not utilized commonly available steel channels, angles and such. It appears that they were building wood framed cars in much the same way but from how early a date?"

The first cars designed by Alonzo Mather were built in the 1880s.


Ben Hom