Date   

Hutchins Dry Lading Roof?

David
 

I'm inclined to think this is someone's outside metal roof, and not any sort of all-steel roof.

David Thompson


Re: Hutchins Dry Lading Roof?

Dennis Storzek
 

On Fri, Mar 13, 2020 at 12:23 PM, Gene Deimling wrote:
It appears to be a Viking roof similar to those used on SP boxcars
Yeah, it does, but I don't think the Viking name was in use in 1916, being a trade name Chicago-Cleveland transitioned to some time around WWII.

Dennis Storzek


Re: Soo Line boxcar

Richard Remiarz
 

Elliot,

I used Campbell Scale Models chain, which is 42 links per inch.  I used 1x6 styrene for the brake levers, and 0.012 wire with clevises made from Grandt Line turnbuckles for the brake rods.

Rich Remiarz
Vadnais Heights, MN


On Mar 13, 2020, at 11:40 AM, Elliot Courtney via Groups.Io <ecourtne@...> wrote:



Great model! What size chain and brass strip do you need for the brake cylinder pulley assembly? My sunshine kit of the soo sawtooth did not include either. 

Thanks,
Elliot 


SPECIAL NOTICE – Toronto Railway Prototype Modellers Meet postponement

Richard McQuade
 

SPECIAL NOTICE – Toronto Railway Prototype Modellers Meet postponement

 

Current public health concerns due to the spreading of Covid -9 have compelled us to postpone the Toronto Railway Prototype Modellers Meet scheduled to be held on Sat. Mar. 21 at Humber College to a later date at the College. Many of us are older and have a higher risk of contracting the virus. We cannot ensure that proper social distance can be maintained at Humber. We hope that anybody who has paid for travel tickets will be able to get full reimbursement given this situation. Safety for all is our primary concern.

Below are the websites of the three government public health websites where you can get the latest information about Covid 19.

 

https://www.canada.ca/en/public-health/services/diseases/coronavirus-disease-covid-19.html

 

https://www.publichealthontario.ca/en/diseases-and-conditions/infectious-diseases/respiratory-diseases/novel-coronavirus

 

https://www.toronto.ca/community-people/health-wellness-care/diseases-medications-vaccines/coronavirus/

 

We regret having to take this measure and hope that you will continue to support our Meet in the future when we look forward to again having a great day of modelling fun and cameraderie! We will continue to work with Humber College and will contact you when we are able to reschedule the meet.

 

Please pass this information onto anybody you know who usually comes to the Meet or has expressed interest in attending.

 

Our sincerest best wishes to all that you and yours may remain healthy through this challenging time.

 

James Whatley Richard McQuade Brian Gauer

Organizers of the Toronto Railway Prototype Modellers Meet


Re: Hutchins Dry Lading Roof?

Gene Deimling
 

It appears to be a Viking roof similar to those used on SP boxcars

Gene Deimling 


Re: RPM updates

John Sykes III
 

The Valley Forge RPM has been cancelled due to Corona virus.

-- John


Re: Soo Line boxcar

O Fenton Wells
 

Nice looking build Rich, like the finished product.
Fenton

On Thu, Mar 12, 2020 at 9:32 PM Richard Remiarz <rremiarz@...> wrote:
Greetings,

I completed Soo Line 133542 last night, just in time for this weekend's Twin Cities Railroad Modeler's Retreat.  It is a Speedwitch K108 Soo Line Sawtooth Single Sheathed Box Car kit, painted with Tru-Color TCP-200 SOO Freight Car Red and weathered with Pan Pastels.  I hope to have one more car completed tomorrow morning.

Sincerely,
Rich Remiarz
Vadnais Heights, MN



--
Fenton Wells
250 Frye Rd
Pinehurst NC 28374
910-420-8106
srrfan1401@...


Re: Hutchins Dry Lading Roof?

mel perry
 

you are correct, it is a chicago-clevrland,
if memory serves me right?, bob hundman in MM did an article on how
to build one of these radial roofs
from scratch, and one of the prototype
illustrations featured this roof with
the bolt head (?) attachments on the
rib supports, believe the issue was 8/99
;-)
mel perry

On Fri, Mar 13, 2020, 10:34 AM Dave Parker via Groups.Io <spottab=yahoo.com@groups.io> wrote:
I agree that it's a radial roof, but it doesn't seem to match the images of the Hutchins "camber" roof in the 1916 CBC.  I don't know who made that roof.
--
Dave Parker
Swall Meadows, CA


pdf attachment errors

John Cathcart
 

Group/ moderator, Lately I am unable to open pdf attachment to received messages and instead land on the group home page. Seem to happen about every other digest. Anyone else having this problem? Assistance appreciated. jgcat1at cox dot net.


Re: Hutchins Dry Lading Roof?

Dave Parker
 

I agree that it's a radial roof, but it doesn't seem to match the images of the Hutchins "camber" roof in the 1916 CBC.  I don't know who made that roof.
--
Dave Parker
Swall Meadows, CA


Re: Hutchins Dry Lading Roof?

mel perry
 

the radial version
mel perry

On Fri, Mar 13, 2020, 10:00 AM Bob Chaparro via Groups.Io <chiefbobbb=verizon.net@groups.io> wrote:

Hutchins Dry Lading Roof?

A photo taken in 1916:

https://www.flickr.com/photos/ssave/39075615572/in/album-72157689846832316/

Is this an example of a Hutchins Dry Lading roof?

Thanks.

Bob Chaparro

Hemet, CA


Hutchins Dry Lading Roof?

Bob Chaparro
 

Hutchins Dry Lading Roof?

A photo taken in 1916:

https://www.flickr.com/photos/ssave/39075615572/in/album-72157689846832316/

Is this an example of a Hutchins Dry Lading roof?

Thanks.

Bob Chaparro

Hemet, CA


Re: Soo Line boxcar

Elliot Courtney
 

Great model! What size chain and brass strip do you need for the brake cylinder pulley assembly? My sunshine kit of the soo sawtooth did not include either. 

Thanks,
Elliot 


Re: RPM updates

G.J. Irwin
 

A "recommend" from me for the Toronto RPM.  It's relatively small but has been growing.  Several historical societies are attending this year.

This is the geographically closest one to me (international border notwithstanding).  I have been watching to ensure it's still on given the current COVID-19 situation but so far that appears to be the case.

https://torontoprototypemodellers.wordpress.com/

Cheers,
George Irwin


Re: Soo Line boxcar

Dave Lawler
 

I really like those cars. They have lots of “personality”.

Great looking model.

Dave Lawler

 

Sent from Mail for Windows 10

 


Re: Scratch building FGEX car sides.

Scott
 

The presentation PDF is on Ted blog.

Link to Kitbash PDF

It is about halfway down with photos of cars 10925 and 10857.

Scott McDonald 


Re: Help Identifying Boxcar Ends.

Randy Hammill
 

I must have mistranscribed the GN group.

I mentioned the flat bottom of the top rib in a second post.

Thanks!

Randy

Randy Hammill
Prototype Junction
http://prototypejunction.com

Modeling the New Haven Railroad 1946-1954
http://newbritainstation.com


Re: Soo Line boxcar

Dennis Storzek
 

I, of course, have a soft spot in my heart for models of these cars, and this is a very nice build, and an extremely nice paint and weathering job.

Dennis Storzek


Re: Help Identifying Boxcar Ends.

Tim O'Connor
 

Thanks Steve. You're right but I have ignored the treatment of the flat-bottom top major rib because EVERYONE in the hobby biz has ignored it (in HO scale) with one Accurail exception (I think; from memory). There are dozens and dozens of examples where that feature is missing from our models. :-(

-----Original Message-----

From: Goatfisher2@comcast.net
To: main@RealSTMFC.groups.io
Sent: 2020-03-13 5:05:05 AM
Subject: Re: [RealSTMFC] Help Identifying Boxcar Ends.



**** SOME of the SP B-50-27 box cars had the earlier ends without the extra thin rib at the top. ****

**** I've enclosed two photos to show this - SP 100303 and 100441. Evidently the ends changed during the construction period. ****

SP 100303 has the IDN-2 end that to my knowledge has never been offered in model form - thin top rib with the bottom of the top rolling pin flattened.

SP 100441 has a version of the end I've never seen before - no top stiffener with a flat bottomed top rolling pin - another opportunity for a niche product!

The B-50-27 had a 10-0 IH body with 6' door and 10 panel sides - For that you will need the Intermountain 1937 AAR body (which has a blank space for the car end).

**** The GN 11000 series had the earlier ends. ****

GN 10' IH 12 panel cars with the IDN-1 end:

2525 - 2549 (3/1948)
10900 - 11199 (2/48)
11200 - 11374 (3/48)

GN 10' IH 12 panel cars with the IDN-2 end:

11375 - 11624 (6/48)
11625 - 11874 (6/48)
18000 - 18499 (6/49)
18500 - 19499 (9/49)
19500 - 20499 (11/52)

Best regards,

Steve

Steve Haas
Snoqualmie, WA




--
*Tim O'Connor*
*Sterling, Massachusetts*


Re: Soo Line boxcar

Lester Breuer
 

Fine build.  Look forward to seeing it tonight in the display room at the Modelers Retreat.
Lester Breuer

18101 - 18120 of 188615