Date   

Re: Soo Line boxcar

Elliot Courtney
 

Thank you all for the great info and pictures, this helps me immensely with my build! 


Re: Photo: Salt Lake Garfield & Western Boxcar 100

Tony Thompson
 

Bob Chaparro wrote:

Photo: Salt Lake Garfield & Western Boxcar 100

Photo from the Freight Car Resource on Flickr:

https://www.flickr.com/photos/166114828@N08/48645763226/

Caption: "Salt Lake Garfield & Western 100, a double-sheathed wood end steel underframe car with Bettendorf T-section trucks. Built in 1924 for the Salt Lake & Utah Railroad but never delivered.

     The caption means that the car was never delivered to the SL&U, and eventually acquired by the SLG&W.

Tony Thompson




NATIONAL SCALE CAR - New parts and Full Restock

Ryan Mendell
 

Hello Steam Era Freight Car modellers.

Just a quick announcement that we have completely restocked our line of Mini Kits and added new detail parts to our line.

Full details on the website including updates and announcements of new releases.

www.nationalscalecar.com

Ryan Mendell
National Scale Car


Re: C&O 8000-9499 boxcar end diagram

Dennis Storzek
 

Thanks Ben. Since its not the car I was thinking of, I have nothing that will help you. However, I encourage you to order the N&W drawing David has identified. This is one level deeper than the typical General Arrangement drawing, and includes enough sectional views that a 3D model can be constructed entirely from the information on that drawing, provided you can read the dimensions. The N&WHS  are a wonderful resource; fast and reasonably inexpensive for the value received.

Dennis Storzek


Photo: Salt Lake Garfield & Western Boxcar 100

Bob Chaparro
 

Photo: Salt Lake Garfield & Western Boxcar 100

Photo from the Freight Car Resource on Flickr:

https://www.flickr.com/photos/166114828@N08/48645763226/

Caption: "Salt Lake Garfield & Western 100, a double-sheathed wood end steel underframe car with Bettendorf T-section trucks. Built in 1924 for the Salt Lake & Utah Railroad but never delivered.

A history of this car can be found here: https://utahrails.net/utahrails/slgw-locos.php "

Bob Chaparro

Hemet, CA


Re: The Deco end B&O box car has been sold

rdgbuff56
 

Sent e-mail about the other two. Expecting repl!
Francis A. Pehowic, Jr.

On Saturday, March 14, 2020, 12:26:31 PM EDT, Andy Carlson <midcentury@...> wrote:


Wish I had a dozen!
Thanks,
-Andy


The Deco end B&O box car has been sold

Andy Carlson
 

Wish I had a dozen!
Thanks,
-Andy


New '37 AAR box cars with Deco and NSC-2 ends

Andy Carlson
 

Hi everyone-

I have had some extra Intermountain cars shipped to me just this week. I have one each of the B&O Deco end car and one each of the Canadian NSC-2 end cars; A CN and an O.N. car.

This A&EC and D&LW cars seem to be standard '37 AAR cars, I have one each.


One each are available. Priced for $29 each plus buyer to pay $7 and up shipping to the US. I accept checks and money orders. With a small fee PayPal is welcomed. Contact me off-list (Please) for details at: <midcentury@...>
Thanks,
-Andy



Re: KCS boxcar

gtws00
 

Great looking model
George Toman


Re: C&O 8000-9499 boxcar end diagram

Benjamin Scanlon
 
Edited

Hullo Dennis

unsure, but here's an image for reference, C&O History magazine, March 2005. 
--
Ben Scanlon
Tottenham, England


Re: C&O 8000-9499 boxcar end diagram

Benjamin Scanlon
 

Thanks David

May be better than the rather rough diagram I'm working with. 
--
Ben Scanlon
Tottenham, England


Re: KCS boxcar

Paul Doggett
 

Rich 

A nicely built model.

Paul Doggett.   England 🏴󠁧󠁢󠁥󠁮󠁧󠁿 


On 14 Mar 2020, at 01:51, Richard Remiarz <rremiarz@...> wrote:

 Attached are photos of a KCS Interim AAR boxcar I just completed.  It was built from a Speedwitch kit.  The flat finish dried less than 2 hours before packing the car and bringing it to the Twin Cities Modeler’s Retreat.  Nothing like a deadline to drive progress.

The photos were taken at the Modeler’s Retreat tonite on a module I will be using tomorrow for a scenery clinic.

Sincerely,
Rich Remiarz 
Vadnais Heights, MN

Attachments:


Re: Soo Line boxcar

Dennis Storzek
 

On Fri, Mar 13, 2020 at 08:47 PM, Richard Remiarz wrote:
I don’t know if this part was unique to the later cars that were modeled by the Sunshine kit, or if it was used on all series of Soo sawtooth boxcars.
You mean this: https://realstmfc.groups.io/g/main/album?id=43499

I've never seen one on any Soo car with a fishbelly UF, nor is it shown on the Haskell & Barker drawings of the early twenties cars (the prototype for that kit) so surmise they were only on the later cars. The only one of the 1926, 28, 29, and 30 built cars I've been able to inspect is the 1929 car at the Illinois Railway Museum, where those pix were taken.

Dennis Storzek


Special Military Trains

John Barry
 


John Barry
 
ATSF North Bay Lines 
Golden Gates & Fast Freights 
Lovettsville, VA

707-490-9696 

PO Box 44736 
Washington, DC 20026-4736


Re: Soo Line boxcar

Richard Remiarz
 

Elliot,

I just found the instructions for the Sunshine kit, and now understand what you are referring to.  Neither the instructions for the Speedwitch kit or Ted Culotta’s article on the cars showed this part, so I didn’t include it on the model.  I don’t know if this part was unique to the later cars that were modeled by the Sunshine kit, or if it was used on all series of Soo sawtooth boxcars.  I also looked at a number of photos of Soo sawtooth boxcars.  The few that showed the brake cylinder did not seem to contain the mechanism shown on the Sunshine instructions.  Hopefully one of our Soo Line experts can shed more light on this subject.

Sincerely,
Rich Remiarz


On Mar 13, 2020, at 9:26 PM, Elliot Courtney via Groups.Io <ecourtne@...> wrote:



Rich,
Thank you for the great info! What did you use for the rod that the brake chain “slider” rides on while connected to the chain?  Brass strip? Size? It connects the brake cylinder to the rigging via the chain.

I hope I am explaining it well, the sunshine instructions had a picture of this assembly, supposedly unique to the sawtooth cars.
Elliot 


Re: Soo Line Boxcar Footnote

WILLIAM PARDIE
 

Also the chain on most applications consists of three round rungs with an elongated rung on each end.

Bill Pardie



Sent from my Verizon, Samsung Galaxy smartphone


-------- Original message --------
From: "Elliot Courtney via Groups.Io" <ecourtne@...>
Date: 3/13/20 4:26 PM (GMT-10:00)
To: main@RealSTMFC.groups.io
Subject: Re: [RealSTMFC] Soo Line boxcar

Rich,
Thank you for the great info! What did you use for the rod that the brake chain “slider” rides on while connected to the chain?  Brass strip? Size? It connects the brake cylinder to the rigging via the chain.

I hope I am explaining it well, the sunshine instructions had a picture of this assembly, supposedly unique to the sawtooth cars.
Elliot 


Re: Soo Line boxcar

WILLIAM PARDIE
 

Elliot:

I make up schackels from .010 brass wire for this.
Sounds complicated but is really easy and quick.  Also looks great.

Bill Pardie



Sent from my Verizon, Samsung Galaxy smartphone


-------- Original message --------
From: "Elliot Courtney via Groups.Io" <ecourtne@...>
Date: 3/13/20 4:26 PM (GMT-10:00)
To: main@RealSTMFC.groups.io
Subject: Re: [RealSTMFC] Soo Line boxcar

Rich,
Thank you for the great info! What did you use for the rod that the brake chain “slider” rides on while connected to the chain?  Brass strip? Size? It connects the brake cylinder to the rigging via the chain.

I hope I am explaining it well, the sunshine instructions had a picture of this assembly, supposedly unique to the sawtooth cars.
Elliot 


Re: Soo Line boxcar

Elliot Courtney
 

Rich,
Thank you for the great info! What did you use for the rod that the brake chain “slider” rides on while connected to the chain?  Brass strip? Size? It connects the brake cylinder to the rigging via the chain.

I hope I am explaining it well, the sunshine instructions had a picture of this assembly, supposedly unique to the sawtooth cars.
Elliot 


KCS boxcar

Richard Remiarz
 

Attached are photos of a KCS Interim AAR boxcar I just completed.  It was built from a Speedwitch kit.  The flat finish dried less than 2 hours before packing the car and bringing it to the Twin Cities Modeler’s Retreat.  Nothing like a deadline to drive progress.

The photos were taken at the Modeler’s Retreat tonite on a module I will be using tomorrow for a scenery clinic.

Sincerely,
Rich Remiarz 
Vadnais Heights, MN


Re: Help Identifying Boxcar Ends.

Steve Haas
 

 

**** I must have mis transcribed the GN group. ****

 

Welcome to the group! (GRIN) I can’t begin to tell you how many times I’ve made that mistake in my life!

**** I mentioned the flat bottom of the top rib in a second post. ****

 

Yes, you did. It was late last night as I responded to those messages . . . . . .

 

Best regards,

 

Steve

 

Steve Haas

Snoqualmie, WA

_._,_._,_

18041 - 18060 of 188578