Date   

Re: boxcar roof mystery

Tony Thompson
 

Dennis Storzek wrote:

 Seems I recall the NKP had some auto cars that were built based on an earlier design, where it was found the new diagonal pressing interfered with the loaders, and so the cars were built with diagonal panels EXCEPT for two; those were the older recangular design to gibe the needed clearance.

    SP built some automobile cars with such a feature, doubtless the same reason.

Tony Thompson




Re: boxcar roof mystery

Dennis Storzek
 

I was going to mention, but Ed beat me to it, that the built dates span the production change of the roofs. Not really a big deal, as the panels (the whole component, not just the raised pressing) were interchangeable. Seems I recall the NKP had some auto cars that were built based on an earlier design, where it was found the new diagonal pressing interfered with the loaders, and so the cars were built with diagonal panels EXCEPT for two; those were the older recangular design to gibe the needed clearance.

Dennis Storzek


Re: Tamiya primer (was [RealSTMFC] Painting brass)

Tony Thompson
 

Steve_Wintner wrote:

I have a hybrid, brass n styrene project. Sounds like Tamiya would be a good choice. I have not found any of the Fine primer in bottles for airbrushing, only the regular "liquid surface primer", so I guess I'll try the spray can. If anyone knows of airbrushable Tamiya fine primer, let me know.

     Steve, don't hesitate to use the Tamiya rattle cans. They have a genuine quality nozzle, not like what Testor's makes. Use it carefully, of course, but I think you will find it does quite a good job.

Tony Thompson




Re: Tamiya primer (was [RealSTMFC] Painting brass)

Allen Cain
 

One question that I have always had about model "primers" is are these true "primers" or only paint the color of typical primers?  Are they only intended to paint items leaving the appearance of primed metal surfaces or to act as a true primer?

A true primer has components to aid in paint adhesion.

Any paint experts out there?

Thanks,

Allen Cain


Re: Riding the Rods Part 2 GN 9996

Bill Welch
 

Hi Doug,

From memory it was an overcast day. I tried to play with it a  little bit in Photoshop but stopped as I did not trust my decisions. Even with my colorblindness I can see the purple but I have also seen this in prototype color photos of what I assume are faded by sun and paint failure.

Bill Welch


Re: Photo: National Soap Company Tank Car LBRX 201

gary laakso
 

Are the step like parts on the right side of the dome strap meant to be used as steps in conjunction with the grab iron on top of the strap?

 

Gary Laakso

Northwest of Mike Brock

 

From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> On Behalf Of Bob Chaparro via groups.io
Sent: Monday, April 13, 2020 11:50 AM
To: main@RealSTMFC.groups.io
Subject: [RealSTMFC] Photo: National Soap Company Tank Car LBRX 201

 

Photo: National Soap Company Tank Car LBRX 201

A 1948 photo from the Tacoma Public Library Digital Collections:

http://cdm17061.contentdm.oclc.org/cdm/singleitem/collection/p17061coll21/id/32607/rec/680

Body sheets are single riveted.

Bob Chaparro

Hemet, CA


Photo: National Soap Company Tank Car LBRX 201

Bob Chaparro
 

Photo: National Soap Company Tank Car LBRX 201

A 1948 photo from the Tacoma Public Library Digital Collections:

http://cdm17061.contentdm.oclc.org/cdm/singleitem/collection/p17061coll21/id/32607/rec/680

Body sheets are single riveted.

Bob Chaparro

Hemet, CA


Photo: Boiler Loads

Bob Chaparro
 

Photo: Boiler Loads

A 1948 photo from the Tacoma Public Library Digital Collections:

http://cdm17061.contentdm.oclc.org/cdm/singleitem/collection/p17061coll21/id/15644/rec/1807

Description: "Two flatcars with boilers, Birchfield Boiler. Giant boilers wait on flatcars for shipment to Southern California. The largest will be installed in the new building of the General Petroleum Corp. of Los Angeles. The Birchfield Boiler facilities can be seen in the background. The plant was also completing an order for 25 large pressure tanks complete with copper heating coils for the US Army in addition to approximately 400 tank heaters for the army."

Bob Chaparro

Hemet, CA


Rapido diesel accuracy was RE: [RealSTMFC] Question re: upcoming Rapido USRA DS box

Schuyler Larrabee
 

I have to say that Rapido’s ERIE FA2s are very well detailed (with one minor exception).  That’s at least in part because I saw Bill Schneider at the Springfield (MA) train show while Rapido was still in the project development mode.  He was expecting to see me, and was quick to show me the hand painted ERIE shell he’s just finished the night before – there was still plenty of paint odor present.

 

I looked it over and said it looked fairly good except for the five errors I could see in about two minutes.  Bill was a bit crestfallen, but I told him I’d assemble a group of friends who could provide him the definitive answers to getting the paint and detailing correct.  I emailed three friends and between us we corrected the yellow paint configuration on the roof, the location of the horns, the proper placement of the firecracker antenna as well as some minor details about the wings either side of the nose.  That all took probably 30 emails and attached photos over the course of a week.  Bill and Rapido were very appreciative of the information and the finished units are excellent . . . inexplicably, there are two antennae on the roof.  An easy fix, simply pull the incorrect one out.

 

(I have wondered if I looked long enough at enough photos I’ve not encountered thus far, I >might< find another FA2 with an antenna in the other location . . . but I kind of doubt that.)

 

My point is that if the SP&S FA2s are inaccurate, it is at least in part because those modelers who wanted them did not take the initiative to get in touch with Rapido and help them to get them right.

 

But no FB2’s in the mail today . . . 

 

Schuyler

 

From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> On Behalf Of spsalso via groups.io
Sent: Sunday, April 12, 2020 11:56 PM
To: main@RealSTMFC.groups.io
Subject: Re: [RealSTMFC] Question re: upcoming Rapido USRA DS box

 

Randy,

Rapido does indeed release some road specific details for their locomotives.  Unfortunately, many of the details are incorrect.  The current SP&S FA-2 has at least 9 points of failure on that matter.

Athearn has been pretty good about accurate detailing, lately.  I bought a BNSF diesel that was properly detailed for an era a few years ahead of the one I wanted.  I will now modify it to the era of my choice.  And.  It was remarkably affordable.

These new models, while generic and consequently somewhat overpriced, will still be welcome.  


Ed

Edward Sutorik


Re: PGE wreck video (Question re: upcoming Rapido USRA DS box)

Bob Thompson
 

There’s a book on PGE wrecks called “In the Ditch.” A fascinating read. Find it on Amazon.

Bob Thompson


Re: Tamiya primer (was [RealSTMFC] Painting brass)

steve_wintner
 

Gents, this is all very useful and well timed for my use. I always like a light grey, dead flat primer to be able to really see the surface and make sure it's clean, putty is smoothly sanded, etc. 

I have a hybrid, brass n styrene project. Sounds like Tamiya would be a good choice. I have not found any of the Fine primer in bottles for airbrushing, only the regular "liquid surface primer", so I guess I'll try the spray can. If anyone knows of airbrushable Tamiya fine primer, let me know.

(I'll grit blast with baking soda first, to get a nice clean surface)

Steve


Re: boxcar roof mystery

Ed Hawkins
 



On Apr 12, 2020, at 11:23 PM, Craig Wilson <agecompanyphotog@...> wrote:

I'm starting to work on a model of a specific Ann Arbor RR boxcar.  Fifty cars that were originally built by the Wabash RR circa 1948-1950 were transferred to the AA in 1955 becoming AA 250-299.  Built as WAB 88700-89599 these were 40-foot boxcars with 6-foot doors.  The question of what type of roof to use has arisen.  I have a copy of the page for these cars from the Ann Arbor RR equipment book (a drawing revised Dec. 1964).  It specifies "Std Ry Equipment Co (7R-12712)" for the roof.  Does anybody know if this is a "diagonal panel" or "rectangular panel" roof?

Craig,
The 50 cars reassigned AA 250-299 ca. 2-55 were the former WAB 89550-89599, built ca. 1-50 having diagonal panel roofs. These were the last 50 cars of original series WAB 89300-89599, which also came with the 1948-1954 version r+3-4 Improved Dreadnaught ends. 

Not part of your question but related to the original 300 cars WAB 89300-89599 were 17 cars re# in 11/50 as part of new series 9225-9299 & 8 cars re# in 11-12/50 as part of new series 9363-9436 when equipped with DF Loaders.

The other 500 cars WAB 88700-89299 in the series you mentioned were from an earlier order built starting in 3-48 having 4-4 Improved Dreadnaught ends & Murphy rectangular panel roofs. 
Regards,
Ed Hawkins


Re: Utah Coal Route steel gons in log service

Tony Thompson
 

Bill Smith wrote:

I feel for the loggers. There is a sustainable lumber industry. It helps fund education in Washington State. Need to help those families, but there is no way to support modern mechanized lumbering. 

      Just like coal mining, lumbering today is extremely mechanized. Both harvesting and the lumber mills themselves only need to employ very few people today. The idea to "bring back" lumbering or coal mining jobs is just a fantasy.
        It can be fun to model lumbering in, say, the 1920s. Just don't think it has anything remotely to do with today -- except that trees are cut down.

Tony Thompson




Re: Photo: Poultry Car

Tony Thompson
 

Ray Breyer wrote:

I think that the change from C to X did happen right around 1926; I have photos of LPTC cars as late as 1925, and LPTX cars as early as 1928.

   Ray, I didn't mean to appear to contradict what you said about LPTC. I just didn't want readers to think that ALL changes into "X" reporting marks happened in 1926.

Tony Thompson




Re: Question re: upcoming Rapido USRA DS box

Schuyler Larrabee
 

Mine were allegedly shipped March 30 to 1 April, and have yet to appear in Newton MA.  That’s 12-14 days by Canadian mail and USPS..  Hoping for them today.

 

Schuyler

 

From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> On Behalf Of Charlie Duckworth
Sent: Sunday, April 12, 2020 7:29 AM
To: main@RealSTMFC.groups.io
Subject: Re: [RealSTMFC] Question re: upcoming Rapido USRA DS box

 

Rapido told me that the B units will be here in May. 
--
Charlie Duckworth 
Omaha, Ne.


Re: Photo: Poultry Car

Bob Webber
 

In theory at least, the information may possibly be found at the PA State Archives in Harrisburg, for the Standard Steel built cars, and the H&B cars *may* have information somewhere in the Pullman Library's files - though I haven't located yet.  Much of the freight car data for H&B, aside from the drawings themselves is MIA.  Same, as with many institutions. But we do have drawings and photos, that's more than nothing. 


At 12:21 PM 4/13/2020, Bob Chaparro via groups.io wrote:

Doug  Harding commented:

"That is the only known photo of the car Egg. Unfortunately we cannot make out the car number. It is a Live Poultry car, ie LPTC reporting marks. Most Live Poultry cars were named, but not all. They were named for people, places, or different kinds of fowl, or fowl related words, ie  Egg. By the late 20s there were over 2800 poultry cars on the nations railroads.

I have compiled a list of poultry cars, their numbers and their names, based on photos. Photos are the only record we have of these cars. The list has less than a 100 cars. There is no known list contain such information or records of the Live Poultry Transit Corporation or of the Palace Poultry Car Company. Eventually both companies were owned by North American Car Co."

Bob Webber


Re: Tamiya primer (was [RealSTMFC] Painting brass)

Ken Adams
 

I have been using the Tamiya light grey primer multiple on my current SP O-50-13 project to check detail removal from original shells and the fit of new domes and hand rails. The grey highlights any areas that need attention. 

I have used the Tamiya red oxide primer on several box car projects both as an undercoat and as a final coat with a brushed on Vallejo Model Color Cavalry brown wash to come very close to the SP "Metallic" color.
--
Ken Adams


Re: Photo: Poultry Car

Bob Chaparro
 

Doug  Harding commented:

"That is the only known photo of the car “Egg”. Unfortunately we cannot make out the car number. It is a Live Poultry car, ie LPTC reporting marks. Most Live Poultry cars were named, but not all. They were named for people, places, or different kinds of fowl, or fowl related words, ie  Egg. By the late 20’s there were over 2800 poultry cars on the nation’s railroads.

I have compiled a list of poultry cars, their numbers and their names, based on photos. Photos are the only record we have of these cars. The list has less than a 100 cars. There is no known list contain such information or records of the Live Poultry Transit Corporation or of the Palace Poultry Car Company. Eventually both companies were owned by North American Car Co."


Re: Riding the Rods Part 2 GN 9996

Douglas Harding
 

Bill did you change the lighting you shoot under? The photos look to have a purple cast to the body color. Does not look like the ModelFlex Maroon Tuscan Oxide Red that I have used.

 

 

Doug  Harding

www.iowacentralrr.org

 

 

 

From: main@RealSTMFC.groups.io [mailto:main@RealSTMFC.groups.io] On Behalf Of Bill Welch
Sent: Monday, April 13, 2020 11:54 AM
To: main@RealSTMFC.groups.io
Subject: [RealSTMFC] Riding the Rods Part 2 GN 9996

 

Here is a Great Northern truss rod boxcar inspired by a circa 1954 photo by the late Bruce Meyer built w/a Westerfield kit I ordered when Al announced he was retiring and selling his business. i ordered several kits "just in case" he did not find a buyer—Thank you Andrew Dahm! Pretty much out-of-the-box except for the scratch built Running Board system, and the brass wire and brass turnbuckles for the underframe. Decals are from the kit plus the GN medallion from a Microscale set as I wanted to exactly copy the reference photo I used. The only variance is the GN reweigh location because I could not find the "Q" I needed. Obviously need to install the brake wheel. Painted w/Badger's "Maroon Tuscan Oxide Red."

Bill Welch


Re: Riding the Rods Part 2 GN 9996

Paul Doggett
 

Bill 

Excellent as always 
Paul Doggett.   England 🏴󠁧󠁢󠁥󠁮󠁧󠁿 


On 13 Apr 2020, at 17:54, Bill Welch <fgexbill@...> wrote:

Here is a Great Northern truss rod boxcar inspired by a circa 1954 photo by the late Bruce Meyer built w/a Westerfield kit I ordered when Al announced he was retiring and selling his business. i ordered several kits "just in case" he did not find a buyer—Thank you Andrew Dahm! Pretty much out-of-the-box except for the scratch built Running Board system, and the brass wire and brass turnbuckles for the underframe. Decals are from the kit plus the GN medallion from a Microscale set as I wanted to exactly copy the reference photo I used. The only variance is the GN reweigh location because I could not find the "Q" I needed. Obviously need to install the brake wheel. Painted w/Badger's "Maroon Tuscan Oxide Red."

Bill Welch

Attachments:

17981 - 18000 of 189574