Date   

Re: Boxcar Interior Door Color

Aley, Jeff A
 

Schuyler,

 

               You’ll have to re-send your message to Todd off-list because he’s been banned from RealSTMFC for his blasphemy (not decalling the inside of his box cars)!!

 

Regards,

 

-Jeff

 

P.S. Just kidding!!!!

 

 

From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> On Behalf Of Schuyler Larrabee via groups.io
Sent: Friday, April 17, 2020 12:19 PM
To: main@RealSTMFC.groups.io
Subject: Re: [RealSTMFC] Boxcar Interior Door Color

 

You’re partly off the hook, Todd.  Most resin kits don’t end up with operating doors so no interior decals required, but we need to speak to you about those trucks and the markings on the air reservoirs . . .

 

Schuyler

 

From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> On Behalf Of Todd Sullivan via groups.io
Sent: Friday, April 17, 2020 2:04 PM
To: main@RealSTMFC.groups.io
Subject: Re: [RealSTMFC] Boxcar Interior Door Color

 

Great information!! 

However, I don't think I'm going to start decalling the reporting marks on the inside of my model boxcars!  I don't decal the trucks and underframe and insides of doors, either!

Todd (there are limits!) Sullivan. 


Re: FARMALL TRACTOR loads

Garth Groff and Sally Sanford
 

Bob,

Your search turned up this really neat photo of a Monon flat car: https://www.wisconsinhistory.org/Records/Image/IM8271 . Neat car, Andrews trucks and all.

Yours Aye,


Garth Groff  🦆


Re: FARMALL TRACTOR DECALS

Allan Smith
 

I believe they are the Life Like Red farm tractors. They are very similar to the Farmall Tractors, but you would have to paint and decal them. They are listed on Ebay in sets of three per package.

Al Smith
Sonora CA

On Friday, April 17, 2020, 03:03:36 PM PDT, Charles Peck <lnnrr152@...> wrote:


I see that Walthers has some sort of red farm tractor.  Not being well-informed,
I cannot identify the brand or type, only the color.  They do not appear to have 
any brand markings on them.
Can someone identify the brand and model of these?
Chuck Peck

On Fri, Apr 17, 2020 at 5:32 PM Allen Cain <Allencaintn@...> wrote:
All I could offer is that John Deere has a plant just across the river from Davenport, IA which MIGHT have influenced Iowa farmers?

Allen Cain


Re: FARMALL TRACTOR DECALS

Charles Peck
 

I see that Walthers has some sort of red farm tractor.  Not being well-informed,
I cannot identify the brand or type, only the color.  They do not appear to have 
any brand markings on them.
Can someone identify the brand and model of these?
Chuck Peck

On Fri, Apr 17, 2020 at 5:32 PM Allen Cain <Allencaintn@...> wrote:
All I could offer is that John Deere has a plant just across the river from Davenport, IA which MIGHT have influenced Iowa farmers?

Allen Cain


Re: FARMALL TRACTOR DECALS

Donald B. Valentine <riverman_vt@...>
 

    That sounds like the old Rock Island Plow Co.plant in Rock Island Ill., Allen. Frank Hodina would
probably know for sure.  My Grandfather worked there before coming back east. It was sold to John 
Deere in the late 1890's I believe. I have had family in the area since my g-g-grandfather moved the
family to Rock Island Co, in 1835 when it was said there were less than 100 white people in the area.

Cordially, Don Valentine


Re: HO Scale Grab Irons

John Riddell
 

Tangent Scale Models offers excellent grab irons pre-formed of .008 wire which are accurate in diameter. They offer both straight and drop grabs.

 

. https://www.tangentscalemodels.com/product/drop-grab-irons-quantity-of-24-phosphor-bronze-0-008-diameter/

 

John Riddell

 

Sent from Mail for Windows 10

 


Broadway Limited Tank cars

Allen Cain
 

has anyone attempted to replace the "wood" walkways on Broadway Limited tank cars with "metal" walkways?

And would this modification be appropriate for tank cars in the early to mid 1950's or were wood walk ways still in use?

Allen Cain


Re: FARMALL TRACTOR DECALS

Allen Cain
 

All I could offer is that John Deere has a plant just across the river from Davenport, IA which MIGHT have influenced Iowa farmers?

Allen Cain


Re: National Archives photo - 13 March 1941

Ian Cranstone
 

On Apr 16, 2020, at 4:49 PM, Dave Parker via groups.io <spottab=yahoo.com@groups.io> wrote:

That's a nice shot of a CN Fowler with 5-ft doors (IOW the very nice Speedwitch K104 kit). Although numerous, photos of these cars pre-AB brakes seem to be rather scarce.
That first CN car was built as Canadian Northern 83726 by Canadian Car & Foundry in January 1919 — technically, as CN had been formed the month before, it was actually delivered as a CN car (albeit with CNoR number and lettering), but it took CN another year or so to issue their renumbering guide.

The second car is a CN 504xxx series car (I can’t quite make out the number), also built by Canadian Car & Foundry, but in 1929 (the so-called CNR 1929 Standard Boxcar — very common, with some 9600 cars built from 1929-1931). This was a slightly longer (40’6” vs 36’) and slightly higher inside (8’7” vs 8’) – although the increased height does not seem obvious in this photo.

Ian Cranstone
Osgoode, Ontario, Canada
lamontc@nakina.net
http://freightcars.nakina.net


Re: HO Scale Grab Irons

Tangent Scale Models
 

Tangent Scale Models offers 18-inch 0.008" grab irons here: https://www.tangentscalemodels.com/product-category/unique-and-useful-parts/

We offer cheap first class shipping too - so you receive instant gratification!

Best wishes,

David Lehlbach
Tangent Scale Models


Re: Boxcar Interior Door Color

william darnaby
 

A looong time ago, when I was still working, EMD used old box cars as mobile warehouses and these kind of floated around the plant as needed.  I do not remember the  exterior reporting marks…some secondhand outfit or other…but inside the doors they were marked in the L&N 96xxx series IIRC.  I did not have the freight knowledge I have now but I now recognize them as double sheathed rebuilds.  They caught my attention because I thought them neat and unusual.  I was very pleased when Sunshine offered them many years later.

 

Bill Darnaby

 

 


Re: Boxcar Interior Door Color

John Larkin
 

I'm assuming the car is now history....



On Friday, April 17, 2020, 1:02:03 PM CDT, Craig Wilson <agecompanyphotog@...> wrote:



Good point . . . and I've found this very useful when determining the heritage of a "repurposed" car.  Attached photo shows what was probably the last surviving Ann Arbor 74000-series boxcar.  It was being used as a storage shed in the city DPW yard in Cadillac Michigan.  The original car number was stenciled on the inside above the door opening.

STMFC trivia:  this car was THE prototype for the Speedwitch resin kit.  Ted Culotta borrowed the drawings that Arnt Gerritsen made from our measurements and photos taken that day.

Craig Wilson

Attachments:


Re: National Archives photo - 13 March 1941

George Courtney
 

A quick glance and that second boxcar over from the Canadian National appeared for an instant to be a G &D boxcar. Of course on closer look it's C&O.

George Courtney


Re: Boxcar Interior Door Color

Tony Thompson
 

Schuyler Larrabee  wrote:

. . . but we need to speak to you about those trucks and the markings on the air reservoirs . . .

    I only do the reservoir lettering when the reservoir is pretty visible, and not always even then -- on the foundation that prototype photos usually show reservoirs VERY dirty and all but impossible to discern lettering.

Tony Thompson




Re: Boxcar Interior Door Color

Schuyler Larrabee
 

You’re partly off the hook, Todd.  Most resin kits don’t end up with operating doors so no interior decals required, but we need to speak to you about those trucks and the markings on the air reservoirs . . .

 

Schuyler

 

From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> On Behalf Of Todd Sullivan via groups.io
Sent: Friday, April 17, 2020 2:04 PM
To: main@RealSTMFC.groups.io
Subject: Re: [RealSTMFC] Boxcar Interior Door Color

 

Great information!! 

However, I don't think I'm going to start decalling the reporting marks on the inside of my model boxcars!  I don't decal the trucks and underframe and insides of doors, either!

Todd (there are limits!) Sullivan. 


Re: FARMALL TRACTOR DECALS

Nelson Moyer
 

With all this talk of tractor loads, I'm wondering if there were regional followings for either Farmall red or John Deere green. I remember seeing mostly red in Indiana in the 1940 and 1950 on visits to the grandparent's farm. With plants in Moline and Waterloo, would John Deere be more prevalent in Iowa than Farmall? More specifically, could I expect more flat car loads of green than red arriving on an Eastern Iowa branch line?


Re: FARMALL TRACTOR loads

Bob Webber
 


Re: F&C LV box car

Rob & Bev Manley
 



Rob Manley
"Better modeling through personal embarrassment"


On Tuesday, April 14, 2020, 05:29:23 PM CDT, Clark Propst <cepropst@q.com> wrote:


bill woelfel
2:09pm   #171723  
Car knocker will bad order that car, no couplers!  

The car in not in it's natural habitat. This car had a Duryea underframe. I'm waiting for an order of Kadee 197s. Those are the ones with the narrow boxes because the boxes will stick out a ways passed the ends. I'll have a photo of the car on the layout when the couplers arrive.

Thanks!!
CW Propst


Re: F&C LV box car

Rob & Bev Manley
 

Clark,
Give it your best. couplers, lift bars and all. I got the virus reduction in force from the auto parts store. SO it looks like PanPastel Blog Guy is my new occupation. That and weathering for money at the local Trains and Sub sandwich store. The owner is former UP and he and several customers are Rock Island modelers. 

Rob Manley
"Better modeling through personal embarrassment"


On Thursday, April 16, 2020, 01:51:47 PM CDT, Schuyler Larrabee via groups.io <schuyler.larrabee@...> wrote:


Completely agree, Bill, That’s a very convincing photo . . .

 

Schuyler

 

From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> On Behalf Of WILLIAM PARDIE
Sent: Thursday, April 16, 2020 2:39 PM
To: main@RealSTMFC.groups.io
Subject: Re: [RealSTMFC] F&C LV box car

 

Super modeling job Ed.  Looking at the photo the only clue that it is  model is the coupler trip pin.  Great weathering.  The setting is the same quality as the model.  

 

Just what I would hope to achieve.

 

Bill Pardie

 

 

Sent from my Verizon, Samsung Galaxy smartphone

 

 

-------- Original message --------

From: Edward <edb8381@...>

Date: 4/16/20 4:03 AM (GMT-10:00)

Subject: Re: [RealSTMFC] F&C LV box car

 

Sad to say, I did not see any photos or any links to photos in the first message.
Here is an LV 'wrong way door' box car I built in O scale, after seeing the HO F&C kit some time ago.
It's a chance to see if this one will show up.

Ed Bommer


Re: FARMALL TRACTOR DECALS

Steve SANDIFER
 

Silver. Just google Farmall 300 and there are lots of photos.

 

 

J. Stephen Sandifer

 

From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> On Behalf Of ron christensen via groups.io
Sent: Thursday, April 16, 2020 8:12 AM
To: main@RealSTMFC.groups.io
Subject: Re: [RealSTMFC] FARMALL TRACTOR DECALS

 

I have a question on seat color. As I remember the Formal 300 we had, had a plastic like cover that was silver in color.
It was our first tractor with any kind of seat covering. before that the seats were metal painted the same as the tractor.
Ron Christensen

10501 - 10520 of 182364