Date   

Re: Accurail 4300: CB&Q 15000-15499 or C&S 13500 series

O Fenton Wells
 

Really nicely done Nelson, looks great
Fenton

On Mon, Sep 21, 2020 at 3:51 PM Nelson Moyer <npmoyer@...> wrote:

Beautiful build. The Accurail car body is very close to the original Speedwitch kit, except the Accurail body has the wood grain detail. The minor differences between the prototype and the Accurail body are in the door stops. The CB&Q removed the horizontal door brace when they added the slogan, and they added the top triangular reinforcement plates for the Z-bars about that time. I build the Sunshine kit as an XM-26, which is virtually identical to the XM-25, and the photo is attached for comparison with the Accurail body. Ted now offers an improved version of the Speedwitch kit, and I have two of them still in the boxes. They include the wood grain detail and other improvements.

 

Nelson Moyer

 

From: main@RealSTMFC.groups.io [mailto:main@RealSTMFC.groups.io] On Behalf Of Rene LaVoise
Sent: Monday, September 21, 2020 8:54 AM
To: main@RealSTMFC.groups.io
Subject: Re: [RealSTMFC] Accurail 4300: CB&Q 15000-15499 or C&S 13500 series

 

Sorry, hit Send before attaching photos. 
--
René LaVoise
Kirkwood, MO

 



--
Fenton Wells
250 Frye Rd
Pinehurst NC 28374
910-420-8106
srrfan1401@...


Re: RIP: Denny S. Anspach

Paul R Greenwald
 

A great loss for general model Railroading and RPM in particular.
--
Paul R Greenwald 
PRRT&HS #1802
NMRA #129229


Dr. Denny Anspach, MD 1934-2020

Jack Burgess
 

I had long heard that Denny was heavily involved in the creation of the California State Railroad Museum which is confirmed by this account.

 

Jack Burgess

 

From: California State Railroad Museum Foundation [mailto:info@...]
Sent: Monday, September 21, 2020 11:39 AM
To: jack@...
Subject: In Memoriam: Dr. Denny Anspach, MD 1934-2020

 

 

A Lifelong Rail Enthusiast & Advocate,

California State Railroad Museum Foundation Board Member

Dr. Denny Anspach, M.D., Passed Away September 20

 

 

 

Dr. Denny Anspach M.D., a highly esteemed member of the California State Railroad Museum Foundation Board of Directors, passed away on Sunday, September 20, 2020 at the age of 86 after a long battle with cancer. A passionate rail enthusiast, Dr. Anspach was instrumental in the vision for and creation of the California State Railroad Museum that opened in 1981.

 

Born in Chicago in 1934, Dr. Anspach was a graduate of Stanford University medical school, a retired radiologist in Sacramento (which included serving as Chief of Radiology at Sutter General Hospital), and Arden Park resident for 50+ years. While growing up in Chicago, Dr. Anspach had a fascination with railroads from a young age and was committed to preserving their legacy over the course of his entire lifetime. After relocating to Sacramento, Dr. Anspach hosted a historic dinner in 1970 for California Governor Ronald Reagan aboard the Gold Coast, an occasion designed to win the governor’s support for what would one day become the California State Railroad Museum. Ronald Reagan would later turn the first shovelful of dirt to signify the start of the construction of the museum.

 

“There is no question that we would not have the California State Railroad Museum without Dr. Denny Anspach, he was truly the ‘Founding Father,” said Cheryl Marcell, President & CEO of the California State Railroad Museum Foundation. “He was my guide, my historian, and my counselor in all things as I stepped into the role of President & CEO of the Foundation. I cherished our long breakfast meetings at The Sutter Club, our travels throughout the country and enjoyed listening and learning. He would often say that we shouldn’t get bogged down by policies and procedures and if it was the right thing to do, we should just do it! He will forever be remembered for his passion and his dedication and we are all better human beings by knowing Dr. Denny Anspach.” 

 

Dr. Anspach was also the founding president of the Sacramento Trust for Historic Preservation and was the primary author of the nearly 200-page “California State Railroad Museum: Recommendations for Planning & Development” that was published in 1972 and served as the master plan for the world-class museum. He served as the unofficial but effective custodian of many prized locomotive and was instrumental in the relocation of the Gov. Stanford, the Central Pacific railroad's first locomotive that remains on display in the Railroad Museum. He was honored to serve as master of ceremonies for the grand opening of the California State Railroad Museum (that coincided with Railfair ’81) at the Old Sacramento Waterfront.

 

“Dr. Denny Anspach was a public servant not by vocation but by advocation,” said Ty Smith, Museum Director for the California State Railroad Museum. “Over the last three years, I had the great pleasure of traveling, laughing, and learning with him. I came to understand that, although he had many interests, three things animated his life: his family, his work as a medical doctor, and his stewardship of the California State Railroad Museum. I intend to honor his legacy by putting my maximum effort into ensuring that the Museum will continue to help people imagine their futures, by understanding our collective past. Dr. Anspach has passed, but his good work is forever enshrined in the Museum and the community.”

 

In 2014, the national Railway & Locomotive Historical Society presented Dr. Anspach with the prestigious Gerald M. Best Senior Achievement Award, named for the famed railroad historian. Up until his death, Dr. Anspach remained active on the Board of Directors of the California State Railroad Museum Foundation, an organization he helped to create, and served on its executive committee. He is survived by his wife Rev. Diane Wenthe, daughter Carolyn Smith and son-in-Law Kenneth Smith, son David Anspach, granddaughter Anna Smith, grandson David Smith, and brother Dr. William Anspach. At the request of the family and in lieu of flowers, any remembrance donations should be made to the California State Railroad Museum Foundation. Click here to make a memorial donation.

 

The California State Railroad Museum Foundation recently commissioned the creation of a bronze bust in honor of Dr. Anspach that will be put on display at the museum in the near future. 

 

 

 

 

About the California State Railroad Museum Foundation 

The California State Railroad Museum Foundation supports both the California State Railroad Museum, in Sacramento, and Railtown 1897 State Historic Park in Jamestown. Our mission is to generate revenue and awareness on behalf of these destinations while supporting the preservation, interpretation and promotion of our railroad heritage. 

 

 

 

California State Railroad Museum Foundation | 106 K St., Suite 200, Sacramento, CA 95814

Trusted Email from Constant Contact - Try it FREE today.

 


Re: Accurail 4300: CB&Q 15000-15499 or C&S 13500 series

Dennis Storzek
 

Really nice work on the C&S car. I see, like the Soo Line, the C&S didn't see any utility in applying a brake step.

I was familiar with at least some of the Q's single sheathed cars from the numerous car bodies that used to be on farms around here, twenty miles from the shops in Aurora, but having incomplete bodies is one thing, real builders drawings are better, and those came via Ken Goslett and Stafford Swain courtesy of the Canadian Railway Historical Society museum in Delson, PQ, so the basis for the Accurail car became a CN car. Back in those days whatever we did was going to be a stand-in for 99 out of a 100 road names anyway, but I wanted good drawings to get at least that 100th car right.

If I could make one suggestion for an additional improvement, carve the back off the lower brake staff support. The prototype is really bent bar stock and the back edges should really be parallel to the outer edge. The part on the model became triangular to add some meat to make it less delicate and simplify tool construction.

Dennis Storzek
Accurail, Inc. 


Re: RIP: Denny S. Anspach

SamClarke
 

Another huge void left by a great man.

 

May God bless him and comfort his family.

 

 

 

Sam Clarke

R&D / Tech Advisor / Artist

Kadee Quality Products Co.

mail@...

541-826-3883

 

 

 

 

 

 

 

 

 


Re: Accurail 4300: CB&Q 15000-15499 or C&S 13500 series

Rene LaVoise
 

Robert,

After carving off the side ladders I used the back of a #11 Xacto blade to score the wood grain where the 'shadow' of the ladder was.  Then went over the area with a scratch brush with metal bristles to help blend.

The top bracket for the brake staff was an extra casting leftover from a Westerfield GN eight truss-rod boxcar.  Before finding it in my parts box I had planned to use a bottom brake bracket from a Tichy brake set.

--
René LaVoise
Kirkwood, MO


Re: Accurail 4300: CB&Q 15000-15499 or C&S 13500 series

Nelson Moyer
 

Beautiful build. The Accurail car body is very close to the original Speedwitch kit, except the Accurail body has the wood grain detail. The minor differences between the prototype and the Accurail body are in the door stops. The CB&Q removed the horizontal door brace when they added the slogan, and they added the top triangular reinforcement plates for the Z-bars about that time. I build the Sunshine kit as an XM-26, which is virtually identical to the XM-25, and the photo is attached for comparison with the Accurail body. Ted now offers an improved version of the Speedwitch kit, and I have two of them still in the boxes. They include the wood grain detail and other improvements.

 

Nelson Moyer

 

From: main@RealSTMFC.groups.io [mailto:main@RealSTMFC.groups.io] On Behalf Of Rene LaVoise
Sent: Monday, September 21, 2020 8:54 AM
To: main@RealSTMFC.groups.io
Subject: Re: [RealSTMFC] Accurail 4300: CB&Q 15000-15499 or C&S 13500 series

 

Sorry, hit Send before attaching photos. 
--
René LaVoise
Kirkwood, MO

 


Photo: PRR Gondola 350115 (Undated)

Bob Chaparro
 

Photo: PRR Gondola 350115 (Undated)

A photo from the Detroit Public Library:

https://digitalcollections.detroitpubliclibrary.org/islandora/object/islandora%3A160440

Click and hold to enlarge photo.

Bob Chaparro

Hemet, CA


Re: RIP: Denny S. Anspach

Tony Thompson
 

      I am still processing the news abut Denny. I saw his historian and leadership roles while I   served more than ten years on the Collections Committee of the California State Railroad Museum (which Denny had chaired from its inception), having been appointed through Denny's auspices. I am still on the committee.
       But I think I first recognized the depths of his model railroading passions after one of the times I attended the Roseville model railroad show, a very big swap meet-type event held in November. Denny and Bob Church, who were good friends, used to get a table to sell off their surplus stuff, and I went a few times to add some of my own stuff to their sales. During the show, we would take turns visiting the other booths, and Denny soon returned with a totally decrepit, damaged and broken HO scale freight car, that he knew was a Varney paper-side kit. He was beside himself with joy, though I wasn't sure I understood why.
        Some time later I happened to visit Denny at his house, and he showed me that Varney car: carefully disassembled with acetone, cleaned up and all parts repaired and paint retouched, and then carefully reassembled, with more modern grab irons and sill steps. It looked quite good, and his joy was undiminished. That was Denny.

Tony Thompson




Photo: Kaiser-Frazer Automobile Bodies On Flat Cars (1951)

Bob Chaparro
 

Photo: Kaiser-Frazer Automobile Bodies On Flat Cars (1951)

A photo from the Detroit Public Library:

https://digitalcollections.detroitpubliclibrary.org/islandora/object/islandora%3A195535

Click and hold to enlarge photo.

Caption:

View of Kaiser cars lined up on Union-Pacific railroad flatcars inside Kaiser-Frazer automobile factory. "Kaiser, '51, Frazer, '51" is spelled out on car roofs. Row of cars are parked in foreground. Stamped on back: "Photo from Kaiser-Frazer Corp., Willow Run, Mich., neg.#, date."

Bob Chaparro

Hemet, CA


Re: Accurail 4300: CB&Q 15000-15499 or C&S 13500 series

Schuyler Larrabee
 

Robert,

 

I would suggest that you make a wood block that just fits inside the car body.  It provides support for the car sides when you want to do something like shave off that band across the car door.

 

Schuyler

 

From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> On Behalf Of Robert kirkham
Sent: Monday, September 21, 2020 12:53 AM
To: main@RealSTMFC.groups.io
Subject: [RealSTMFC] Accurail 4300: CB&Q 15000-15499 or C&S 13500 series

 

First progress shots on kit bashing Accurail 4300 series model into a C&S 13500-13999.  



Stripped most of the paint - that was stubborn!  Used both 99% alcohol and that purple stuff (can’t recall the name).   



Used a new knife blade and single edge razor blade to shave off the ladder and grab irons.  



I started cutting the roof off with a 1.25” circular blade in the drill press, moving the car into the blade with the car body resting on a fitted block that helped keep the car body level.  I made it from a scrap of plywood about 3” x 8”, and glued on a rectangle of balsa wood to fit tightly inside the shell.  Drilled a shallow hole into the plywood base where the bottom of the vertical brake stand protrudes lower than the rest of the shell.   The plywood and balsa block worked OK, but I still had to hold the shell down on it with my hands.  That’s not ideal around moving cutters!  If I was to do it again, I’d clamp a fence of some sort in place rather than guiding the block free-hand.   That would control the federate better and be safer as well.  



I ran into a problem with the blade melting the plastic rather than clearing chips of plastic saw dust.  This accumulated and - after I thought I was nearly through - the blade wandered upward just enough to spoil some roof detail.   I could blame the blade, which was flimsy, but I think the whole method was a bit too much for the set up.   I switched the blade out for an end mill and cleaned things up that way.   I’m planning to add some Yarmouth (Stafford Swain and Dan Kirlin) Hutchins roof panels to replace the original roof.     



Not sure if I have the nerve to remove the horizontal angle iron across the mid-height of the door . . .   Also, not yet sure I will carve the ladder (or the obviously wrong right ladder stile) off the end.   

 

Rob

 


Re: Accurail 4300: CB&Q 15000-15499 or C&S 13500 series

Nelson Moyer
 

Beautiful build. The Accurail car body is very close to the original Speedwitch kit, except the Accurail body has the wood grain detail. The minor differences between the prototype and the Accurail body are in the door stops. The CB&Q removed the horizontal door brace when they added the slogan, and they added the top triangular reinforcement plates for the Z-bars about that time. I build the Sunshine kit as an XM-26, which is virtually identical to the XM-25, and the photo is attached for comparison with the Accurail body. Ted now offers an improved version of the Speedwitch kit, and I have two of them still in the boxes. They include the wood grain detail and other improvements.

 

Nelson Moyer

 

From: main@RealSTMFC.groups.io [mailto:main@RealSTMFC.groups.io] On Behalf Of Rene LaVoise
Sent: Monday, September 21, 2020 8:54 AM
To: main@RealSTMFC.groups.io
Subject: Re: [RealSTMFC] Accurail 4300: CB&Q 15000-15499 or C&S 13500 series

 

Sorry, hit Send before attaching photos. 
--
René LaVoise
Kirkwood, MO


Re: RIP: Denny S. Anspach

Bob Chaparro
 

A repost from the ESPEE Group:

https://www.bizjournals.com/sacramento/news/2018/03/12/ed-goldman-dr-denny-anspach-has-had-a-two-track.html

This is a Sacramento Business Journal feature article about Denny from March 12, 2018.

Bob Chaparro

Hemet, CA


Re: Accurail 4300: CB&Q 15000-15499 or C&S 13500 series

Robert kirkham
 

Very nice carving job Rene!  I’m curious to know what you used for that part at the top of the end to support the brake staff?

Rob

On Sep 21, 2020, at 6:51 AM, Rene LaVoise <rlavoise@...> wrote:

Robert,

I just finished applying the decals on my build of C&S 13571 last week. Haven’t yet applied flat coat or any weathering yet. 

On the ends I removed the inboard ladder stile except for the middle part spanning the two end sections. 
--
René LaVoise
Kirkwood, MO


Re: RIP: Denny S. Anspach

Schuyler Larrabee
 

Jeff,

 

Thanks for reporting this extremely sad news.  I am extremely sad to receive it.

 

Simply put, Denny was a great man, a practitioner in real life of a very difficult profession, and in his recreational life, he utilized the empathetic skills as powerfully as he did in his medical practice.  Never one to criticize another’s work, on the other hand, he would answer a question as well as anyone in this hobby could, from electronics to detailing to the history of a car or locomotive.

 

I have to add that he influenced some of the most personal decisions of my life, far from the hobby aspect, and I have always been thankful for the counsel he provide in a very tough time for me.

 

Schuyler

 

From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> On Behalf Of Aley, Jeff A
Sent: Sunday, September 20, 2020 10:22 PM
To: RealSTMFC@groups.io; PassengerCarList@groups.io; RockIslandLines@groups.io
Subject: [RealSTMFC] RIP: Denny S. Anspach

 

It is my sad duty to inform you that my great friend, Denny Anspach, passed away today, September 20, 2020.  Denny was a man of great accomplishments, not only within our hobby of prototype and model railroading, but also in other areas.  But to me his greatest attribute was his friendship and mentoring – which I will try to “pay forward” until we meet again.  I was often impressed by the fact that he knew so many great individuals.  I gradually learned that Denny had a tremendous ability to focus on a person’s best traits, no matter who they were.  All people are great and highly accomplished in some way, and Denny always spoke of a person’s finest character.

 

I will miss him tremendously.

 

-Jeff Aley

 


Re: [Non-DoD Source] Re: [RealSTMFC] Accurail 4300: CB&Q 15000-15499 or C&S 13500 series

Gatwood, Elden J SAD
 

Nice looking car, Rene!

 

Elden Gatwood

 

From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> On Behalf Of Rene LaVoise
Sent: Monday, September 21, 2020 9:54 AM
To: main@RealSTMFC.groups.io
Subject: [Non-DoD Source] Re: [RealSTMFC] Accurail 4300: CB&Q 15000-15499 or C&S 13500 series

 

Sorry, hit Send before attaching photos. 
--
René LaVoise
Kirkwood, MO


Re: Accurail 4300: CB&Q 15000-15499 or C&S 13500 series

Rene LaVoise
 

Sorry, hit Send before attaching photos. 
--
René LaVoise
Kirkwood, MO


Re: Accurail 4300: CB&Q 15000-15499 or C&S 13500 series

Rene LaVoise
 

Robert,

I just finished applying the decals on my build of C&S 13571 last week. Haven’t yet applied flat coat or any weathering yet. 

On the ends I removed the inboard ladder stile except for the middle part spanning the two end sections. 
--
René LaVoise
Kirkwood, MO


Re: RIP: Denny S. Anspach

Douglas Harding
 

Sorry to hear this. I was privileged to be a guest in the Anspach homes in both Sacramento and Okoboji (his summer home in Iowa). And I had Denny as a guest in two different homes to see progress on my Iowa Central layout. We shared mutual interests in Iowa railroads and the Fairmont Motor Co. and often shared notes through the years on related modeling and research projects. I fondly remember Denny giving me a private tour of the backshops of the California State Railroad Museum, while regaling me with stories of its creation and building. He rode the SP cab forward as it was moved into position while the museum was being built. Denny also introduced me to Ellen in the library who assisted me with a research project, and the curator Wyatt. Both connections I treasured. I will truly his him.

 

Doug Harding

www.iowacentralrr.org

 

From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> On Behalf Of Aley, Jeff A
Sent: Sunday, September 20, 2020 9:22 PM
To: RealSTMFC@groups.io; PassengerCarList@groups.io; RockIslandLines@groups.io
Subject: [RealSTMFC] RIP: Denny S. Anspach

 

It is my sad duty to inform you that my great friend, Denny Anspach, passed away today, September 20, 2020.  Denny was a man of great accomplishments, not only within our hobby of prototype and model railroading, but also in other areas.  But to me his greatest attribute was his friendship and mentoring – which I will try to “pay forward” until we meet again.  I was often impressed by the fact that he knew so many great individuals.  I gradually learned that Denny had a tremendous ability to focus on a person’s best traits, no matter who they were.  All people are great and highly accomplished in some way, and Denny always spoke of a person’s finest character.

 

I will miss him tremendously.

 

-Jeff Aley

 


Re: Photo: Many Tanks Cars (Undated)

Douglas Harding
 

Sinclair has two refineries in Wyoming, Sinclair (was Parco) and Casper. Headquarters is in Salt Lake City.

 

Doug Harding

www.iowacentralrr.org

 

From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> On Behalf Of RICH CHAPIN via groups.io
Sent: Monday, September 21, 2020 5:52 AM
To: main@RealSTMFC.groups.io
Subject: Re: [RealSTMFC] Photo: Many Tanks Cars (Undated)

 

Notes for the photos say "Courtesy of the Sinclair Consolidated Oil Corporation, New York." wonder where photo taken, doesn't look like anything near NYC

Rich Chapin
Basking Ridge NJ