Date   

Re: GN 50ft boxcar in two-tone paint scheme lettered as STORAGE MAIL EXPRESS (in 1983!)

Tim O'Connor
 


I photographed this SAME car in 1991 in Denver (NMRA convention), near the old "union stock yards".

I hope someone preserved it. :-)

Tim O'Connor


On 5/10/2021 10:58 AM, Claus Schlund wrote:
Hi List Members,
 
GN 50ft boxcar in two-tone paint scheme lettered as
 
STORAGE MAIL
EXPRESS
 
and also spray painted TOOL CAR at Denver Union Station
 
 
Altho dated 1983, I suspect this car may have been in service in 1960 or earlier - others will know better than I do.
 
Enjoy!
 
Claus Schlund


--
Tim O'Connor
Sterling, Massachusetts


LS&I ds boxcar (road number might be 2003) Munising MI 1930

Claus Schlund \(HGM\)
 

Hi List Members,
 
LS&I ds boxcar (road number might be 2003) Munising MI 1930
 
 
Enjoy!
 
Claus Schlund
 

 


Re: [Non-DoD Source] [RealSTMFC] A variety of steel boxcars, Chicago

Gatwood, Elden J SAD
 

That is a fabulous collection of cars.

 

I don’t know the classes of many cars, but I think the PRR box car to left is either class X29F or X29G, due to carbody, lettering in late Shadow Keystone sans serif “PRR”, and the deep side sill with “box” supports.

 

I think the car number begins with “605”, but can anyone make out the complete car number?

 

These cars were often used in appliance shipment out of mid-west states like Ohio and Indiana.  Its appearance in Chicago empty could make sense.

 

Elden Gatwood

 

From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> On Behalf Of Claus Schlund \(HGM\)
Sent: Monday, May 10, 2021 10:20 AM
To: STMFC <main@RealSTMFC.groups.io>
Subject: [Non-DoD Source] [RealSTMFC] A variety of steel boxcars, Chicago

 

Hi List Members,

 

A variety of steel boxcars, Chicago

 

 

Enjoy!

 

Claus Schlund

 

 


GN 50ft boxcar in two-tone paint scheme lettered as STORAGE MAIL EXPRESS (in 1983!)

Claus Schlund &#92;(HGM&#92;)
 

Hi List Members,
 
GN 50ft boxcar in two-tone paint scheme lettered as
 
STORAGE MAIL
EXPRESS
 
and also spray painted TOOL CAR at Denver Union Station
 
 
Altho dated 1983, I suspect this car may have been in service in 1960 or earlier - others will know better than I do.
 
Enjoy!
 
Claus Schlund


Re: NP 25685 and other steel boxcars in Minneapolis

Tim O'Connor
 


Definitely 1962 or later. Beautiful picture, though.

Tim O'Connor


On 5/9/2021 12:22 PM, Claus Schlund wrote:
Hi List Members,
 
NP 25685 and other steel boxcars in Minneapolis
 
 
Enjoy!
 
Claus Schlund


--
Tim O'Connor
Sterling, Massachusetts


A busy time at the team track Chicago 1934

Claus Schlund &#92;(HGM&#92;)
 

Hi List Members,
 
A busy time at the team track Chicago 1934 - an image I find to be spectacular that simply transports us back more than 90 years into the past
 
"Men with products on trucks and horse-drawn wagons near train at Chicago Northwestern Railroad Depot"
 
It is clearly wintertime - everyone is wearing their coats, even the horses!
 
 
Quite a number of things immediately jump out at me, a few of them are...
 
(1) Note how many businesses were still using horses to get the job done in this relatively late 1934 date
 
(2) Note how a few of the conveyances are positioned for side-loading, but the vast majority are positioned for diagonal loading, at maybe a 45 degree angle relative to the freight car involved. None of the vehicles has been positioned at a 90 degree angle against the freight cars - I would think this 90 degree angle would make for the easiest work, with the vehicle back loading door flush against the freight car side, but perhaps that would also entirely block the flow of all other vehicular traffic
 
(3) There is a building clearly marked RAILWAY EXPRESS AGENCY above the left end of the activity
 
More info can be found at the link below...
 
 
Enjoy!
 
Claus Schlund
 
 


Re: A variety of steel boxcars, Chicago

Tim O'Connor
 


Claus all of those IC terminal shots in Chicago are circa 1960 or slightly later. Many of them
contain views of piggyback cars. They are fabulous photos!

Tim O'Connor

On 5/10/2021 10:19 AM, Claus wrote:
Hi List Members,
 
A variety of steel boxcars, Chicago
 
 
Enjoy!
 
Claus Schlund


--
Tim O'Connor
Sterling, Massachusetts


A variety of steel boxcars, Chicago

Claus Schlund &#92;(HGM&#92;)
 

Hi List Members,
 
A variety of steel boxcars, Chicago
 
 
Enjoy!
 
Claus Schlund
 
 


Re: [Non-DoD Source] [RealSTMFC] B&O Gon Carrying Big Inch Pipe

Gatwood, Elden J SAD
 

Well done, Mike!

 

Elden Gatwood

 

From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> On Behalf Of Schleigh Mike via groups.io
Sent: Monday, May 10, 2021 9:26 AM
To: main@RealSTMFC.groups.io; main@RealSTMFC.groups.io
Subject: Re: [Non-DoD Source] [RealSTMFC] B&O Gon Carrying Big Inch Pipe

 

The car number is 260986 making it an O-59a (260500-260999) from 1940.

 

Mike Schleigh in Grove City, Penna.

 

On Monday, May 10, 2021, 08:56:39 AM EDT, Gatwood, Elden J SAD <elden.j.gatwood@...> wrote:

 

 

Bruce, Group;

 

This guy looks like it might be a B&O O-59.  What do you think?

 

This definitely looks like it is on one of the tracks inside National Tube Company in McKeesport, PA.  That building in back looks like one of the oldies in that plant I saw back in the day while railfanning the area.

 

B&O interchanged here through McKeesport Connecting RR, to their own tracks, also P&LE and PRR.

 

Elden Gatwood

 

 

From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> On Behalf Of Bruce Griffin
Sent: Sunday, May 9, 2021 3:12 AM
To: main@RealSTMFC.groups.io
Subject: [Non-DoD Source] [RealSTMFC] B&O Gon Carrying Big Inch Pipe

 

I’m sharing a post from the B&0 IO group that would be of interest to some on this list. 
--

May 8   #5359  

 

Hello to all.

 

While looking at pipeline pages I came across this neat photo.

 

B&O 260986 is a 1940-vintage, Bethlehem Steel, 52’ - 6” steel, flat bottom, drop end, cushion underframe gondola.

 

In the photo it is hauling the first load of 24-inch pipe for the Big Inch and Little Big Inch pipelines built in WW-2.

 

Pipe was made by National Tube but I cannot read the small print to see what city it was.

National Tube had several locations but probably in McKeesport, PA.

 

I searched on the car number and it seems that Tangent Scale Model made a model with this car number. Cool.

https://www.tangentscalemodels.com/product/baltimore-ohio-bo-o-59a-capitol-dome/

https://www.tangentscalemodels.com/bethlehem-70-ton-riveted-drop-end-gondola/

 

Photos of National Tube in McKeesport, PA

national tube mckeesport pa

 

 

 

Bruce D. Griffin
Ashland, MD
https://bomodeling.com/blog/

 


Re: [Non-DoD Source] [RealSTMFC] B&O Gon Carrying Big Inch Pipe

Schleigh Mike
 

The car number is 260986 making it an O-59a (260500-260999) from 1940.

Mike Schleigh in Grove City, Penna.

On Monday, May 10, 2021, 08:56:39 AM EDT, Gatwood, Elden J SAD <elden.j.gatwood@...> wrote:


Bruce, Group;

 

This guy looks like it might be a B&O O-59.  What do you think?

 

This definitely looks like it is on one of the tracks inside National Tube Company in McKeesport, PA.  That building in back looks like one of the oldies in that plant I saw back in the day while railfanning the area.

 

B&O interchanged here through McKeesport Connecting RR, to their own tracks, also P&LE and PRR.

 

Elden Gatwood

 

 

From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> On Behalf Of Bruce Griffin
Sent: Sunday, May 9, 2021 3:12 AM
To: main@RealSTMFC.groups.io
Subject: [Non-DoD Source] [RealSTMFC] B&O Gon Carrying Big Inch Pipe

 

I’m sharing a post from the B&0 IO group that would be of interest to some on this list. 
--

May 8   #5359  

 

Hello to all.

 

While looking at pipeline pages I came across this neat photo.

 

B&O 260986 is a 1940-vintage, Bethlehem Steel, 52’ - 6” steel, flat bottom, drop end, cushion underframe gondola.

 

In the photo it is hauling the first load of 24-inch pipe for the Big Inch and Little Big Inch pipelines built in WW-2.

 

Pipe was made by National Tube but I cannot read the small print to see what city it was.

National Tube had several locations but probably in McKeesport, PA.

 

I searched on the car number and it seems that Tangent Scale Model made a model with this car number. Cool.

https://www.tangentscalemodels.com/product/baltimore-ohio-bo-o-59a-capitol-dome/

https://www.tangentscalemodels.com/bethlehem-70-ton-riveted-drop-end-gondola/

 

Photos of National Tube in McKeesport, PA

national tube mckeesport pa

 

 

 

Bruce D. Griffin
Ashland, MD
https://bomodeling.com/blog/

 


Re: [Non-DoD Source] [RealSTMFC] B&O Gon Carrying Big Inch Pipe

Gatwood, Elden J SAD
 

Bruce, Group;

 

This guy looks like it might be a B&O O-59.  What do you think?

 

This definitely looks like it is on one of the tracks inside National Tube Company in McKeesport, PA.  That building in back looks like one of the oldies in that plant I saw back in the day while railfanning the area.

 

B&O interchanged here through McKeesport Connecting RR, to their own tracks, also P&LE and PRR.

 

Elden Gatwood

 

 

From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> On Behalf Of Bruce Griffin
Sent: Sunday, May 9, 2021 3:12 AM
To: main@RealSTMFC.groups.io
Subject: [Non-DoD Source] [RealSTMFC] B&O Gon Carrying Big Inch Pipe

 

I’m sharing a post from the B&0 IO group that would be of interest to some on this list. 
--

May 8   

 

Hello to all.

 

While looking at pipeline pages I came across this neat photo.

 

B&O 260986 is a 1940-vintage, Bethlehem Steel, 52’ - 6” steel, flat bottom, drop end, cushion underframe gondola.

 

In the photo it is hauling the first load of 24-inch pipe for the Big Inch and Little Big Inch pipelines built in WW-2.

 

Pipe was made by National Tube but I cannot read the small print to see what city it was.

National Tube had several locations but probably in McKeesport, PA.

 

I searched on the car number and it seems that Tangent Scale Model made a model with this car number. Cool.

 

Photos of National Tube in McKeesport, PA

 

 

 

Bruce D. Griffin
Ashland, MD
https://bomodeling.com/blog/

 


Re: Flat car with lumber load Vancouver Island

Dave Lawler
 

The ship’s name board shows the letters “FIDE?”.

If someone has an old Lloyds Register they might be able to identify it.

Dave Lawler

 

Sent from Mail for Windows 10

 


Re: Flat car with lumber load Vancouver Island

Gavin
 

It would be like shipping copper to Britannia Beach :).


On Sun, May 9, 2021 at 7:46 PM Chuck Soule <timken2626@...> wrote:
I would suspect it is much more likely the lumber is being loaded ONTO the ship to go elsewhere.  There would be little need to ship lumber TO Vancouver Island :)

Chuck Soule


Re: New HO scale freight car kits

lrkdbn
 

You have a point, but I suspect there are a lot of engineering considerations involved in making a master for a one piece open top car that make it much different from making a  one off model.Unless it could be of similar quality to,for example, the RCW ICRR hopper in regard to side wall thickness, etc. it wouldn't be worth doing, and I don't have that knowledge.
L King


Re: Flat car with lumber load Vancouver Island

Chuck Soule
 

I would suspect it is much more likely the lumber is being loaded ONTO the ship to go elsewhere.  There would be little need to ship lumber TO Vancouver Island :)

Chuck Soule


Re: L&N 58946 40ft steel gon in 1926

kevinhlafferty
 

That's one of the L&N gondolas that the new Resin Car Works kit is based on.

Kevin Lafferty


Re: Flat car with lumber load Vancouver Island

Richard Wilkens
 

Name on the ship is the "Fides" which was a WW2 Liberty Ship and was sold to an Italian shipping company and it sunk in the Elbe estuary on January 20, 1962.

Rich Wilkens


Re: Flat car with lumber load Vancouver Island

Larry Rice
 

Greetings,

Almost certainly Canadian National, being unloaded and the lumber loaded directly aboard ship at Cowichan Bay on Vancouver Island.

Watch this... https://www.youtube.com/watch?v=6b5GBPmwoZo

Larry Rice
Port Townsend  WA
Within sight of Vancouver Island


Re: CV 41353 (40ft ss auto box) and CN 508731 (40ft ss box) on Vancouver Island

David Soderblom
 

I’m going to say these are poles, not logs. Logs get sawn into lumber, but poles are poles, probably for further treatment.

Sent from my tricorder


Re: [Classic-UP] Private cars used for UP fuel oil and diesel

Allan Smith
 

This was probably a car that was damaged on the UP and the original car owner didn't want to pay for the repairs. The UP probably determined that the car could be repaired in UP shops at little cost and used in MOW service.

Al Smith
Sonora CA

On Saturday, May 8, 2021, 05:10:12 AM PDT, Garth Groff and Sally Sanford <mallardlodge1000@...> wrote:


Ray,

No prototype at all. Yes, there were three-compartment tank cars, but nearly all were much smaller than the Athearn . . . uh . . . model. The tank size represents a total volume of about 12,000 gallons. Most triples were 8,000 or smaller. The Athearn offering is trainset junk, as are/were several knock-offs by other trainset manufacturers.

The only correct plastic model of a three compartment tank car that I can think of is Tangent's 6,000 gallon General American car, currently not in production: https://www.tangentscalemodels.com/general-american-6000-gal-3-comp-tank-car/ . IIRC, there have been one or two resin kits for this type of car, and of course there have been brass models of varying quality and accuracy.

Yours Aye,


Garth Groff  🦆



On Sat, May 8, 2021 at 7:20 AM Ray Hutchison <rayhutchison2@...> wrote:
Book (above) and there was an Athearn model of three-dome tank car.  Not certain how true to prototype it might be.

https://www.pwrs.ca/announcements/view.php?ID=9181

rh

11161 - 11180 of 195354