Date   

Re: C&O 40ft steel gondola and a flat with removable milk containers - Renovo PA 1952

pennsylvania1954
 

Hi Chuck--Almost certainly an H9s with that tender. By 1952 there were only H9s and H10s classes.
--
Steve Hoxie
Pensacola FL


Re: Mystery Car Tag

Douglas Harding
 

Spoiled Food? Taking a guess.

 

Doug Harding

www.iowacentralrr.org

 

From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> On Behalf Of Bob Chaparro via groups.io
Sent: Thursday, June 10, 2021 10:04 PM
To: main@RealSTMFC.groups.io
Subject: [RealSTMFC] Mystery Car Tag

 

Mystery Car Tag

I found this photo of a GM&O car tag.

It simply reads “S P L F D”. Almost like a line on an eye chart.

Does anyone know what “S P L F D” means?

Thanks.

Bob Chaparro

Hemet, CA


Re: Rapido USRA Single Sheath Boxcar announced

Brian Carlson
 

I covered some of the USRA SS cars in my Rust Belt boxcars clinic at cocoa beach, Greensburg and online during Hindsight 1 and 2. 

In no particular order here are my notes

D&H USRA SS 20% of the boxcar fleet in 1950. 12.4% in 1957. 
The potential problem is these cars were rebuilt in 1937 with some strengthening changes to the side sill and door frame area, and they were reroofed. They got a combination of Murphy raise panel roof, climax radio or Viking roof. Car assignments were random so you need to work from photographs. 

CNJ 
15% of the fleet in 1950. Gone in 57. 20000-20498 series.  Still had k brakes in late 40’s and wood door. New power handbrake. Roof not sure. 
Wonder if these were a casualty of the k brake ban? 

Reading
8.75% of the fleet in 1950 0.65% in 1957
1951 photo I have of 5828 has AB brakes but the rest, including the roof, look original.  Bill had the same pic tonight. 

Brian J. Carlson 

On Jun 10, 2021, at 11:18 PM, Andy Laurent via groups.io <andy.laurent@...> wrote:

The Rapido announcement for the USRA boxcars starts about 19:48 into the video here:
https://www.facebook.com/rapidotrains/videos/794304604562129/ 

15 versions. 14 road names.

Andy L
Madison WI


Re: Rapido USRA Single Sheath Boxcar announced

Andy Laurent
 

The Rapido announcement for the USRA boxcars starts about 19:48 into the video here:
https://www.facebook.com/rapidotrains/videos/794304604562129/ 

15 versions. 14 road names.

Andy L
Madison WI


Mystery Car Tag

Bob Chaparro
 

Mystery Car Tag

I found this photo of a GM&O car tag.

It simply reads “S P L F D”. Almost like a line on an eye chart.

Does anyone know what “S P L F D” means?

Thanks.

Bob Chaparro

Hemet, CA


Re: Fw: [RealSTMFC] Whose door?

Scott H. Haycock
 

I think this could be a replacement door- too new for your era, Clark. The car has a 1973 date on it, and the car to the left is sans a running board. 

Scott Haycock
Modeling Tarheel country in the Land of Enchantm
ent

On 06/10/2021 6:42 PM Benjamin Hom <b.hom@...> wrote:
 
 
 
Clark Propst asked:
"Anyone know who made this door?"
 
Pullman-Standard.  Part available in HO from Moloco.
 
 
Ben Hom
 


Fw: [RealSTMFC] Whose door?

Benjamin Hom
 

Clark Propst asked:
"Anyone know who made this door?"

Pullman-Standard.  Part available in HO from Moloco.


Ben Hom


Moloco Trucks

WILLIAM PARDIE
 

I was introduced to the Moloco Barber Stabilized 
S-2-A trucks in one of Ted Culotta's blogs.  He illustrated them as being used on a Santa Fe Ft-vflatcar and indicated that he would like follow up  with a full list of applications.  HS this list ever materialized?

Bill Pardie

Sent from my Verizon, Samsung Galaxy smartphone


Rapido USRA Single Sheath Boxcar announced

Gerald Henriksen
 

Just announced on a Facebook Live, newsletter and website will show it
sometime tomorrow.

- 3 different doors
- Ann Arbor, B&O, C&O, CNJ, C&NW, D&H, MEC, MILW, N&W, NYC, Pennsy,
Reading, SP, + 1 more couldn't see (I think I got the list correct
from the image they showed on the livestream).


Re: Who's door?

mel perry
 

hutchins?
;-)
mel perry

On Thu, Jun 10, 2021, 3:52 PM Clark Propst via groups.io <cepropst=q.com@groups.io> wrote:
Anyone know who made this door?
Clark Propst


Who's door?

Clark Propst
 

Anyone know who made this door?
Clark Propst


Re: C&O 40ft steel gondola and a flat with removable milk containers - Renovo PA 1952

Charles Greene
 

Now that's rich Pennsy railroading! Which H-subclass on the point, -8?

                -Chuck

On Thu, Jun 10, 2021 at 4:39 PM Claus Schlund &#92;(HGM&#92;) <claus@...> wrote:
Hi List Members,
 
A C&O 40ft steel gondola and a flat with removable milk containers - Renovo PA 1952
 
 
Enjoy!
 
Claus Schlund
 
 


C&O 40ft steel gondola and a flat with removable milk containers - Renovo PA 1952

Claus Schlund &#92;(HGM&#92;)
 

Hi List Members,
 
A C&O 40ft steel gondola and a flat with removable milk containers - Renovo PA 1952
 
 
Enjoy!
 
Claus Schlund
 
 


UP Livestock Car 42299 (S-40-15)

Bob Chaparro
 

UP Livestock Car 42299 (S-40-15)

Photo from Don Strack’s UtahRails Website:

https://donstrack.smugmug.com/UtahRails/Union-Pacific/UP-Freight-Cars/i-XwXhpJ3/A

Click on the photo to enlarge it.

Built 3-1956 in the Omaha Shops. Steel-sided construction.

A diagram from Dick Harley’s Harley-Trains website:

https://harley-trains.smugmug.com/UPFreightDiagrams/Stock-Car/i-JDWJC8p/A

Bob Chaparro

Moderator

Railway Bull Shippers Group

https://groups.io/g/RailwayBullShippersGroup


Reserves fully met: Great Northern 1954 rebuilt 50' SS auto car boxcar

Andy Carlson
 

I have the 10 cars reserved. Thanks for those folks. My plans don't have me making more than these 10 cars.
Thanks,
-Andy

On Wednesday, June 9, 2021, 5:53:19 PM PDT, Andy Carlson <midcentury@...> wrote:



The Great Northern had 1000s of early 1920s wood side box cars which had fishbelly structured underframes and early style of steel ends. In 1952 the GN initiated a rebuild of these cars into more useful all steel 8' single door box cars. The wood siding, flooring doors and roof were jettisoned to the trash heap. New riveted sides with post war Youngstown steel doors and a diagonal panel steel roof were placed onto the existing fish belly under frame and 6/5/5 Murphy corrugated ends. The cars were not heightened and remained at pre-rebuilt 10'0" IH.
Inline image

Bill Welch's  HO model from years ago.

The initial rebuilds were painted into the then standard GN Mineral Red scheme with a side ways facing goat. Early on quite a few were equipped with load dividers and were painted into at least 3 Orange and Green "loader" schemes. Even later, many received Vermillian red in slant serif and EB lettering plus Big Sky Blue and many Glacier Green schemes were done as well.

My work on this series of rebuilds was done years ago. At the time I was making these molds Bill Welch asked for a pair of sides as he had a Westerfield 1925 50' SS autocar, which were the types used for the rebuilding. I eventually tried an experimental technique to have the roof integrate the inclusion of the top gable shaped portion of the 6/5/5 corrugated ends. The end just needed to be horizontally flat across the top. While making the fit of the roof to the sides critically exact, the difficult-at-times of fitting roofs, sides and ends together with no gaps was made much easier.

I had made  a longer wheelbase fish belly under frame back then getting the striker distance to bolster center to 5'0".  I was to learn years later that GN did lots of modifications to the under frame for the rebuildings. Floor stringers which were not on the 1925 floors were added, along with cross-ties and cross member which the originals did not have any of either. I have started adding these structural additions to my stretched frame.

After some other current works which are placed ahead of this project are done I will complete the molds for this GN 50' rebuild box car. I am planning on making 10 casting sets which will be offered to the STMFC list at that time. If anyone wishes to have me reserve a non-obligated one of these cars for later purchase, feel free to ask. I am not accepting any up front money for these. Please note that these are not one-piece bodies.
-Andy Carlson
Ojai CA
<midcentury@...>






Paint progress

Eric Hansmann
 

I recently ended up with eleven freight car models at the paint booth. I made a line up card to keep track of the progress on each model. Those details are in the latest DesignBuildOp blog post.

Eric Hansmann
Murfreesboro, TN


7-course ACF LPG tank cars

nyc3001 .
 
Edited

Hi guys,

Ever since I got an OMI 3028 "1936" ACF LP tank car (which had 7 courses instead of 6, as seen on the Atlas and Kadee models), I've been looking for info on the earlier 7-course LP tank cars.

So, to sum up the sources listed at the end:

1. The OMI tank is 10.5k gallons, roughly 94" in diameter, and 1.5 ft. longer than the Kadee and Atlas tanks.


2. Ed's presentation states that there were 1,091 SHPX 7-course tank cars built from 1940-1946. These tanks were 11k gallons, 85" in diameter, and 4' longer than the Kadee and Atlas tanks.

3. The DuPont tank car in the thread is 11k gallons and also has 7 courses.


This leads me to tentatively conclude that:

1. There were at least two distinct designs and corresponding gallonages of ACF 7-course LP tanks. P
ossibly someone knows if there were more?

2. The DUPX tank car may be of a similar or the same design as the SHPX cars given their similar gallonages and build dates.

3. These are clearly important models whose numbers weren't insignificant compared to the Kadee and Atlas models. Other than OMI 3028, I don't think there is another accurate 7-course LPG tank in HO. It would be nice to see an 7-course 11k tank given that the underframe components seem to exist already (of course, the underframe will have to be lengthened by 4").


There were other 7-course LPG tank cars built by GATC, but I don't know enough about them to comment.



Elden Gatwood's comments on the OMI model:

"OVL 3028 is a very nice model of a roughly 10.5K 7-course 1936-built ~94"

diam ACF-built 105. Philgas and others had copies of this car. It is
similar to the 6-course Atlas car, but just different enough (~ 1.5 ft longer
tank, also) to be a nice option."
https://realstmfc.groups.io/g/main/message/101019?p=,,,20,0,0,0::Created,,3028,20,2,0,17238877


A recent thread on some 11k Dupont t
ank cars:
https://realstmfc.groups.io/g/main/topic/80283542#181608

Ed Hawkins's presentation given at the 2016 St. Louis RPM:
https://www.kadee.com/STL2016RPM/11K-Gal._ICC-105A_ACF_Type%2027.pdf

-Phil Lee


Great Northern 1952/3 rebuilt 50' SS auto car boxcar

Andy Carlson
 


The Great Northern had 1000s of early 1920s wood side box cars which had fishbelly structured underframes and early style of steel ends. In 1952 the GN initiated a rebuild of these cars into more useful all steel 8' single door box cars. The wood siding, flooring doors and roof were jettisoned to the trash heap. New riveted sides with post war Youngstown steel doors and a diagonal panel steel roof were placed onto the existing fish belly under frame and 6/5/5 Murphy corrugated ends. The cars were not heightened and remained at pre-rebuilt 10'0" IH.
Inline image

Bill Welch's  HO model from years ago.

The initial rebuilds were painted into the then standard GN Mineral Red scheme with a side ways facing goat. Early on quite a few were equipped with load dividers and were painted into at least 3 Orange and Green "loader" schemes. Even later, many received Vermillian red in slant serif and EB lettering plus Big Sky Blue and many Glacier Green schemes were done as well.

My work on this series of rebuilds was done years ago. At the time I was making these molds Bill Welch asked for a pair of sides as he had a Westerfield 1925 50' SS autocar, which were the types used for the rebuilding. I eventually tried an experimental technique to have the roof integrate the inclusion of the top gable shaped portion of the 6/5/5 corrugated ends. The end just needed to be horizontally flat across the top. While making the fit of the roof to the sides critically exact, the difficult-at-times of fitting roofs, sides and ends together with no gaps was made much easier.

I had made  a longer wheelbase fish belly under frame back then getting the striker distance to bolster center to 5'0".  I was to learn years later that GN did lots of modifications to the under frame for the rebuildings. Floor stringers which were not on the 1925 floors were added, along with cross-ties and cross member which the originals did not have any of either. I have started adding these structural additions to my stretched frame.

After some other current works which are placed ahead of this project are done I will complete the molds for this GN 50' rebuild box car. I am planning on making 10 casting sets which will be offered to the STMFC list at that time. If anyone wishes to have me reserve a non-obligated one of these cars for later purchase, feel free to ask. I am not accepting any up front money for these. Please note that these are not one-piece bodies.
-Andy Carlson
Ojai CA
<midcentury@...>






Re: MTC 71979

akerboomk
 

RE: History of these cars:

 

Try this:

https://www.bmrrhs.org/box_71000_series/

 

I am working on collating the B&M “Disposition records” for these cars, I hope to add that data in the next month or 2.

If anyone has anything else to add, let me know…

 

Ken


--
Ken Akerboom


Re: MTC 71979

Tony Thompson
 

     I like the model, Clark, good weathering touches. Glad you shared it.

Tony Thompson



8681 - 8700 of 193642