|
Re: Rock Island decals
I presume that you mean the 1930 vintage cars like
Freight Cars—Wooden - Lake States Railway Historical Association (lakestatesarchive.org)
Sunshine made kits for some of these, and so there must have been decals, but other than that, I don’t recall any decals specifically for these cars. It is a pretty simple scheme and could, perhaps, be cobbled from Champ road name sets. Perhaps Ron Von Werder from Rocket Express would sell you some of his for the auto cars of similar vintage.
Steve Hile
From: main@RealSTMFC.groups.io [mailto:main@RealSTMFC.groups.io] On Behalf Of Richard Townsend via groups.io
Does anyone make HO scale decals for a CRI&P single-sheathed boxcar with three panels on each side of the door? Richard Townsend Lincoln City, OR
|
|
|
|
|
|
Re: Barkley Better Boxes
Jerry Michels
Thanks Steve!
|
|
|
|
|
|
Re: Photo: Unusual Load On HD Flat Cat
David Soderblom
Keep clicking on the arrows and you’ll see a trove of high/wide loads. Each is interesting in its own right.
Sent from my tricorder
|
|
|
|
|
|
Re: Sunshine NYC Hopper Minikit?
That's an impressive kitbash ! Nice car. You can make silk purses from a sow's ear! :-) Tim O'Connor
On 8/13/2021 3:07 PM, Bob Chapman wrote:
--
Tim O'Connor Sterling, Massachusetts
|
|
|
|
|
|
Re: Additional interesting loads from the EJ&E
Charles Happel
The second and third pictures appear to be taken at Roundout, IL, where the EJ&E interchanges with the Milwaukee Road. Chuck Happel “The whole problem with the world is that fools and fanatics are always so certain of themselves, and wiser people so full of doubts.” Bertrand Russell
On Friday, August 13, 2021, 04:03:11 PM EDT, Bruce Smith <smithbf@...> wrote: Folks,
http://www.ejearchive.com/index.php?/albums/official-loads/content/co-loads-315/lightbox/ http://www.ejearchive.com/index.php?/albums/official-loads/content/co-loads-314/lightbox/ http://www.ejearchive.com/index.php?/albums/official-loads/content/co-loads-313/lightbox/ http://www.ejearchive.com/index.php?/albums/official-loads/content/co-loads-312/lightbox/
The load (which looks like a refinery cracking tower, or kiln of some sort) is carried on 4 flat cars. The wider end is on a Milwaukee, 4-truck flat car. Interestingly, just behind this is a 1942 built Milwaukee Road gun flat. There is another MILW gun flat at the other end.
Regards, Bruce Smith
From: <main@RealSTMFC.groups.io> on behalf of "Bob Chaparro via groups.io" <chiefbobbb@...>
Photo: Unusual Load On HD Flat Cat Photo from the Elgin, Joliet & Eastern Railway Archive: http://www.ejearchive.com/index.php?/albums/official-loads/content/co-loads-307/lightbox/ No caption to indicate what this load is. Anyone? Bob Chaparro Hemet, CA
|
|
|
|
|
|
Rock Island decals
Richard Townsend
Does anyone make HO scale decals for a CRI&P single-sheathed boxcar with three panels on each side of the door? Richard Townsend
Lincoln City, OR
|
|
|
|
|
|
Additional interesting loads from the EJ&E
Folks,
http://www.ejearchive.com/index.php?/albums/official-loads/content/co-loads-315/lightbox/ http://www.ejearchive.com/index.php?/albums/official-loads/content/co-loads-314/lightbox/ http://www.ejearchive.com/index.php?/albums/official-loads/content/co-loads-313/lightbox/ http://www.ejearchive.com/index.php?/albums/official-loads/content/co-loads-312/lightbox/
The load (which looks like a refinery cracking tower, or kiln of some sort) is carried on 4 flat cars. The wider end is on a Milwaukee, 4-truck flat car. Interestingly, just behind this is a 1942 built Milwaukee Road gun flat. There is another MILW gun flat at the other end.
Regards, Bruce Smith
From: <main@RealSTMFC.groups.io> on behalf of "Bob Chaparro via groups.io" <chiefbobbb@...>
Photo: Unusual Load On HD Flat Cat Photo from the Elgin, Joliet & Eastern Railway Archive: http://www.ejearchive.com/index.php?/albums/official-loads/content/co-loads-307/lightbox/ No caption to indicate what this load is. Anyone? Bob Chaparro Hemet, CA
|
|
|
|
|
|
Re: Barkley Better Boxes
Steve SANDIFER
Assuming he shows up at the Greater Houston Train Show tomorrow (he has a booth) I will give this email to him.
J. Stephen Sandifer
From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> On Behalf Of Jerry Michels
Sent: Friday, August 13, 2021 8:28 AM To: main@realstmfc.groups.io Subject: Re: [RealSTMFC] Barkley Better Boxes
I've tried email and telephone. No answer. Jerry Michels
|
|
|
|
|
|
Re: Sunshine NYC Hopper Minikit?
Bob Chapman
Not a Sunshine minikit, but looking at Brian's NYC photo -- L&N had a similar car, which I did a while back. The sides are spliced Athearn quad and the hoppers Athearn twin, plus some scratchbuilding. Haven't tried to check the L&N prototype dimensions vs. the NYC car, but I recall the L&N prototype being a bit larger than the similar IC car that Sunshine did.
For anyone interested in this modeling approach, there's a complete how-to in Ted C's Prototype Railroad Modeling, Volume 3.
Regards,
Bob Chapman
|
|
|
|
|
|
Photos: Chemical Vessel Loads
Photos: Chemical Vessel Loads Photos from the Elgin, Joliet & Eastern Railway Archive: http://www.ejearchive.com/index.php?/albums/official-loads/content/co-loads-314/lightbox/ http://www.ejearchive.com/index.php?/albums/official-loads/content/co-loads-315/lightbox/ http://www.ejearchive.com/index.php?/albums/official-loads/content/co-loads-317/lightbox/ http://www.ejearchive.com/index.php?/albums/official-loads/content/co-loads-319/lightbox/ http://www.ejearchive.com/index.php?/albums/official-loads/content/co-loads-318/lightbox/ http://www.ejearchive.com/index.php?/albums/official-loads/content/co-loads-322/lightbox/ Bob Chaparro Hemet, CA
|
|
|
|
|
|
Photo: NKP And Other Flat Cars With Beam Girder Load
Photo: NKP And Other Flat Cars With Beam Girder Load Photo from the Elgin, Joliet & Eastern Railway Archive: http://www.ejearchive.com/index.php?/albums/official-loads/content/co-loads-323/lightbox/ Bob Chaparro Hemet, CA
|
|
|
|
|
|
Photo: Unusual Load On HD Flat Cat
Photo: Unusual Load On HD Flat Cat Photo from the Elgin, Joliet & Eastern Railway Archive: http://www.ejearchive.com/index.php?/albums/official-loads/content/co-loads-307/lightbox/ No caption to indicate what this load is. Anyone? Bob Chaparro Hemet, CA
|
|
|
|
|
|
Re: St. Louis RPM wrap up
Jay Styron
Eric,
I liked your photos, with their stroke frames, giving them a “formal portrait” look. Great job! Jay Styron
|
|
|
|
|
|
Re: [Non-DoD Source] [RealSTMFC] Rapido - USRA SS Boxcar change / USRA SS Boxcar CPR "Clone"
Gatwood, Elden J SAD
Guys;
toggle quoted messageShow quoted text
Rapido has been very responsive to our pointing out of details like the rebuilds with Hutchins roofs and new doors. Not everyone chooses to get things right. Kudos to Rapido! Elden Gatwood PRRT&HS Modeling Committee
-----Original Message-----
From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> On Behalf Of Gerald Henriksen Sent: Thursday, August 12, 2021 3:40 PM To: main@RealSTMFC.groups.io Subject: [Non-DoD Source] [RealSTMFC] Rapido - USRA SS Boxcar change / USRA SS Boxcar CPR "Clone" The recently announced USRA Single Sheathed Boxcar has a change at ther request of PRR and B&O modellers Those 2 roadnames will now come with a Hutchins Roof Updated PDF - Blockedhttps://files.constantcontact.com/b02e8bb6001/abc9358b-6a47-43d5-9bd6-1922b3531a30.pdf They have also announced CP's "clone" of the USRA Single Sheathed Boxcar, with different ends and other differences PDF - Blockedhttps://files.constantcontact.com/b02e8bb6001/29f52dad-f151-4ba5-8c79-0b22a13c7ed0.pdf
|
|
|
|
|
|
Re: Barkley Better Boxes
Jerry Michels
I've tried email and telephone. No answer. Jerry Michels
|
|
|
|
|
|
Re: [EXT] [RealSTMFC] Flat car PRR 474194 with load taken in 1977
RICH CHAPIN
That's an Owens-Corning Figerglass tank. Looks like a 20,000 tank OC sold their 3 plant in 1995 to Fluid Containment. One of those plants was in Mt Union PA.
Nice Slide. Rich Chapin Basking Ridge NJ
|
|
|
|
|
|
Re: Sunshine NYC Hopper Minikit?
nyc3001 .
Thanks guys. I severely misworded the original question. I don't have one of these minikits, but was wondering if the Alternate Standard hopper was similar enough dimensionally. Now I see that it isn't.
I would be happy to see these come back as well. If the NYCSHS is able to work with a manufacturer and produce the postwar 31'6" offset-side hopper as has been planned, the only apparent missing major holes in the NYC transition-era 2-bay hopper fleet would be the Common Standard hoppers. -Phil
|
|
|
|
|
|
Re: Lackawanna questions
Clark Propst
On Thu, Aug 12, 2021 at 12:10 PM, Jeff Helm wrote:
I like your car weights Clark, are those lead castings of whale teeth?It's the lead off a bottom bouncer cut in two. If you aren't a Walleye fisherman you can google it ; )) Clark
|
|
|
|
|
|
Re: Sunshine NYC Hopper Minikit?
Again, I don't think so. These hoppers are based on the USRA cars. The USRA car diagram is here PRR GLd were USRA cars E-93171 - class GLd The AAR standard offset cars diagram is attached' The truck centers and length over strikers are different and the AAR standard offset cars have the taper at the end three big things off the top. I'd still start with the Accurail USRA car. You might be able to use the MTH USRA car but it appears the grabs are not aligned on the MTH cars and that would drive me nuts. Brian Carlson
On Thursday, August 12, 2021, 06:03:10 PM EDT, Rich C via groups.io <rhcdmc@...> wrote:
Brian, Since you have to remove or do some carving on the original sides, I don't see why not. The AAR Alternate and AAR twins have 11 side stakes. The AAR Alternate has even spacing, the AAR does not. I, to have one of those mini-kits floating around. When I find it, I can fill you in or send you a PDF on the work needed. Rich Christie
On Thursday, August 12, 2021, 01:09:17 PM CDT, Brian Carlson via groups.io <prrk41361@...> wrote:
I should add, the sunshine instructions say that Frank did the masters for the sides. I would not be unhappy if they made a return under the RCW banner. Brian J. Carlson On Aug 12, 2021, at 1:54 PM, nyc3001 . <nyc3001@...> wrote:
|
|
|
|
|
|
Re: Sunshine NYC Hopper Minikit?
I had these notes with the car at St Louis The never-ending model build – NYC Offset Hopper
The never-ending model build – NYC Offset Hopper • Sunshine Mini-kit (maybe the last) Remove ribs of Accurail USRA hopper, laminate new sides. Done. Seems simple enough. (Could have stopped here 3 Hour Project) • Oops snapped a stirrup step. Ok, I’ll remove them all and replace. • Hmm, …not sure I like the thick grabs. shave them all off. Realize replacing them will be tedious, regret my life choices, Put project away “for awhile”. Summer 2021 come back to model, replace with wire. Including additional wire detail to end and side. • Hmmm… Now looking at photos, the brake wheel, retaining valve, and brake step are in the wrong location. Well, I’ve gone this far. • Remove the offending pieces carefully. Use Tichy parts for the brake wheel and step. Use a scrap box retainer for the retainer. • Add trainline on side. • Add (after painting) air hoses and top mounted uncoupling rods. Any one know of air hose bracket part like the one below 
On Thursday, August 12, 2021, 01:54:57 PM EDT, nyc3001 . <nyc3001@...> wrote:
I saw that Eric Hansmann had posted a photo of Brian Carlson's Sunshine NYC hopper mini-kit build. Does anyone know if this hopper is close enough to Intermountain's Alternate Standard hopper to be the base model for an accurate kitbash? iirc, this prototype was built by MDT and numbered 2,000. Thus, I would probably want to build two. Thanks, Phil
|
|
|
|
