Date   

Re: View of twin hopper TP&W 485 in 1947

Chet
 

Thanks for the information David.  I always thought they were ex-PRR Gla's.

Chet French
Dixon, IL


Re: Single-sheathed box cars

Owen Thorne - owen at udel.edu
 

Hello group,
Beyond a brief mention within this 12 y.o. discussion of using the HO Walthers 50' single sheathed automobile boxcar kit to represent an IC prototype series, I have found little further info searching our archive, or in other groups.io discussion groups. I may have missed something.
  1. How could one bash an IC double-door boxcar using the Walthers kit?
  2. Has anyone a source for a photo or photos of a prototype car?
  3. How about an IC company diagram?
Thank you,
Owen Thorne


Shake n Take 2022

Steve and Barb Hile
 

Please excuse the multiple posts.

 

In between the flood of emails for Black Friday, Please let me remind you that we will be announcing the 2022 Shake n Take project on Saturday evening.

 

We can’t hope to replace Greg Martin, but his friends will seek to emulate his enthusiasm and desire to promote Prototype Modeling through creative kitbashing.

 

There will be a formal announcement of the project this tomorrow evening, around 7:00 PM CST with an invitation to respond and be included.

 

Unfortunately, this year there were costs in obtaining some of the parts for the project and we will be asking for a $15 donation (cash or check to be collected at the meet.)  No one will be denied participation due to an inability to contribute, however.

 

Looking forward to January,

Steve Hile


Re: PLE 46145 gon with scrap tin load 1942

leakinmywaders
 

HO scale can load for a PTSX (Proleride Transportation Systems) recycled steel quad hopper. Aluminum foil tops from canned drinks, mainly Sanpellegrino,  and a few other miscellaneous foil sources sliced with scissors into 2-3" strips, rolled between the thumb and fingers, and mass trimmed to roughly 1/16-inch lengths with scissors.  A good mindless modeling activity while watching TV.   Glued with dilute white glue to a black foam core base, dulled with dustings of dark gray and red oxide chalk, affixed with Dullcote.

Chris Frissell
Polson, MT


Re: PLE 46145 gon with scrap tin load 1942

Tony Thompson
 

Yeah, funny how the bad estimates were always on the high side.
Tony Thompson 


On Nov 26, 2021, at 7:57 AM, Robert Allan via groups.io <robert.allan32@...> wrote:

Looks like this car may have been an overload. The scrap on the ground is an attempt to adjust the weight. Scrap dealers were notoriously bad at judging weight in my field days.

Bob Allan
Omaha


Re: Wisconsin Central “Sawtooth” SS Box Car with Murphy Ends

O Fenton Wells
 

Interesting, Thanks
Fenton

On Fri, Nov 26, 2021 at 1:11 PM Clark Propst via groups.io <cepropst=q.com@groups.io> wrote:
Fenton, I've built both. Run them for awhile then sold the Sunshine car. With the 6' door it didn't have the character of the Speedwitch model.
Clark



--
Fenton Wells
250 Frye Rd
Pinehurst NC 28374
910-420-8106
srrfan1401@...


Re: [EXT] Re: [RealSTMFC] PLE 46145 gon with scrap tin load 1942

Scott H. Haycock
 

Open-top freight cars can also be overloaded by volume. And , this doesn't look like a scrapyard location; it's way too clean. Notice the house car coupled onto the gon.

I think the scrap on the ground has been shoved off the car to keep it from falling off in a train. 

Scott Haycock
Modeling Tarheel country in the Land of Enchantm
ent

On 11/26/2021 12:09 PM Bruce Smith <smithbf@...> wrote:


Hudson,

I would agree. I tend to think that the scrap on the ground is what is left of the pile that was being loaded into the car. 

Regards,
Bruce Smith
Auburn, Al



From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> on behalf of Hudson Leighton <hudsonl@...>
Sent: Friday, November 26, 2021 1:03 PM
To: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io>
Subject: [EXT] Re: [RealSTMFC] PLE 46145 gon with scrap tin load 1942

CAUTION: Email Originated Outside of Auburn.
I think a load of tin can scrap would be hard to overload, lots of air space.

-Hudson


Re: [EXT] Re: [RealSTMFC] PLE 46145 gon with scrap tin load 1942

Bruce Smith
 

Hudson,

I would agree. I tend to think that the scrap on the ground is what is left of the pile that was being loaded into the car. 

Regards,
Bruce Smith
Auburn, Al


From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> on behalf of Hudson Leighton <hudsonl@...>
Sent: Friday, November 26, 2021 1:03 PM
To: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io>
Subject: [EXT] Re: [RealSTMFC] PLE 46145 gon with scrap tin load 1942
 
CAUTION: Email Originated Outside of Auburn.
I think a load of tin can scrap would be hard to overload, lots of air space.

-Hudson


Re: PLE 46145 gon with scrap tin load 1942

Hudson Leighton
 

I think a load of tin can scrap would be hard to overload, lots of air space.

-Hudson


Re: Wisconsin Central “Sawtooth” SS Box Car with Murphy Ends

Clark Propst
 

Fenton, I've built both. Run them for awhile then sold the Sunshine car. With the 6' door it didn't have the character of the Speedwitch model.
Clark


Re: PLE 46145 gon with scrap tin load 1942

Robert Allan
 

Looks like this car may have been an overload. The scrap on the ground is an attempt to adjust the weight. Scrap dealers were notoriously bad at judging weight in my field days.

Bob Allan
Omaha


Re: PLE 46145 gon with scrap tin load 1942

Philip Dove
 

Tiny lengths of fat metal rod or slices of the Right gauge of hypodermic needle for tins, then model  oil cans from oblong of strip wood decal led with microscale decals from a gas station set. My HOscale set includes a decal for stacks of Shell gallon oil cans.  When modelling a scrap metal load for a gondola remaber the source of the metal effects the load. Loads from a automobile factory will be mainly scraps of bright steel sheet. Loads from a demolished industrial structure will be girders, ladders, wheels etc. Acarefull y dismantled structure might have scrap girders loaded on a flat car. 


Re: a number of freight cars in this 1947 view taken on the Alton

Ken Vandevoort
 

First thing I thought of when I saw the photo was the clubhouse my cousins and I built on family land next to the Rock Island's Keokuk & Des Moines Division in Pella, Iowa.  We called it Railroad Club and we were out there to wave at all trains.  We even made a flagpole and had our own flag.  I then saw Michael's comment and realized someone else saw the same thing in that photo.  I miss the 50's.

Ken Vandevoort


Michigan & Kanawha Coal Gone being unloaded

 

https://digital-collections.columbuslibrary.org/digital/collection/memory/id/79239

A couple of 50 ton gons apparently being unloaded at the the Columbus State Hospital (aka the Central Ohio Hospital for the Insane). 

Matt Goodman
Columbus, Ohio 


Re: PLE 46145 gon with scrap tin load 1942

Bill Parks
 

On Thu, Nov 25, 2021 at 11:21 AM, charlie9 wrote:
Just put some Reynold's Wrap in the wife's blender.
Charlie - 

I remember an article (I think in MR) 20 years ago, or so, about modeling scrap tin cans, and the author said he used the wrappers from Hershey Kisses, and put them in a blender.  If you get the Christmas ones, then you have not only silver, but also red, green, and some gold to mix in.
 
--
Bill Parks
Cumming, GA
Modelling the Seaboard Airline in Central Florida


Re: PLE 46145 gon with scrap tin load 1942

nyc3001 .
 

Some of these cars apparently survived up to 1953. It looks like both the wood and steel side versions could be useful for most steam era modelers given their longevity and abundance.

-Phil


Re: a number of freight cars in this 1947 view taken on the Alton

nyc3001 .
 

KINX 104 looks like a Type 17 GATC tank car. 

-Phil Lee


Re: a number of freight cars in this 1947 view taken on the Alton

Michael Gross
 

Thanks, Claus.

This photo takes me back in more ways than one, particularly the fact that my buddies and I built a "fort" along a C&NW embankment near my home in Chicago.  Lots of dreams were shared in that makeshift home along the tracks.
--
Michael Gross
Pasadena, CA


Re: PLE 46145 gon with scrap tin load 1942

Eric Hansmann
 

The NYC Lines built 5,000 gondolas in Lots 331, 332, 333, 334, 335, 336-G in 1916. They were 46-foot, 2-inch interior length with 1018 cubic capacity. The cars were originally built with composite sides and drop ends for mill service. The NYC had 4,000 of these cars with 500 each assigned to the MC and P&LE.

Many were converted to steel sides, such as this one in a 1925 image.

Eric Hansmann
Murfreesboro, TN


On 11/24/2021 3:26 PM Claus Schlund &#92;(HGM&#92;) <claus@...> wrote:


Hi List Members,

PLE 46145 gon with scrap tin load 1942


Metadata below


Enjoy!

Claus Schlund




Re: PLE 46145 gon with scrap tin load 1942

charlie9
 

Just put some Reynold's Wrap in the wife's blender.
Charlie

4981 - 5000 of 193482