Date   

Re: Deleting inadvertent posts

pullmanboss <tgmadden@...>
 

Not that I can see, Jerry. I don't see an edit option available to
the list owner, either.

Tom Madden

--- In STMFC@yahoogroups.com, "jerryglow2" <jerryglow@c...> wrote:

Good info: I wasn't aware of that. Is there any way to edit a post
or
would you have to delete the old and submit a new revised one?

Jerry Glow

--- In STMFC@yahoogroups.com, "pullmanboss" <tgmadden@w...> wrote:

Apologies for stepping on Mike's or Jeff's toes, but an author
can
delete any of his posts at any time. That doesn't stop
inadvertent
posts from going to subscribers getting individual emails, but
does
keep them out of the daily digests (if deleted in time) and
reduces
clutter in the archives. You have to delete from the STMFC web
site,
but if you find and open your post from the Message list there
will
be
a Delete option available at the upper right.

Tom Madden


Re: Reefer running boards, especially NP

mopacfirst
 

Thanks guys -- I've done things on slim evidence before and regretted t
later. In this case, I have already painted the (Plano) Apex running
board, so it's going on the 91250 series car this weekend.

Ron Merrick


--- In STMFC@yahoogroups.com, Richard Hendrickson <rhendrickson@o...>
wrote:

On Dec 15, 2005, at 6:21 AM, Tim O'Connor wrote:

According to an Feb 2005 email from Richard Hendrickson, 91000-91249
(the PFE R-40-23 copies) had Morton running boards.

The photo you refer to is from series 91250-91499, the R-40-25
clones.
So those could have had Apex running boards.
Unfortunately, the NP freight car diagrams for these cars don't call
out the running board manufacturers. However, I have two photos of
91250-91499 series cars in which the running boards are clearly
visible, and in both cases they're the Apex steel grid type.

Richard Hendrickson


Lanes Trains Website update

Bill Lane <billlane@...>
 

Hi All,



I have just completed a major rebuild of my Lanes Trains website. Most of
the old photos have been replaced. I have added at least 150 new photos of
models I have painted, and also what has been made in S Scale. Please give
it a look. I have about 40 hours in the update.



Please note that I do not know how to do websites with hot linked photos
yet. My website is done in WORD. Click on the link below the photos and that
will take you to another page.



Happy Holidays!





Thank You,

Bill Lane



Modeling the Mighty Pennsy in S Scale in 1957



See my finished models at:

http://www.lanestrains.com



Importing a Brass S Scale PRR X29 & G26

http://www.pennsysmodels.com



ALL of the production X29 have arrived as of 6-30-05

Replacement PRR decals arrived 10-5-05



***Join the PRR T&HS***

The other members are not ALL like me!

http://www.prrths.com


Re: Deleting inadvertent posts

jerryglow2
 

Good info: I wasn't aware of that. Is there any way to edit a post or
would you have to delete the old and submit a new revised one?

Jerry Glow

--- In STMFC@yahoogroups.com, "pullmanboss" <tgmadden@w...> wrote:

Apologies for stepping on Mike's or Jeff's toes, but an author can
delete any of his posts at any time. That doesn't stop inadvertent
posts from going to subscribers getting individual emails, but does
keep them out of the daily digests (if deleted in time) and reduces
clutter in the archives. You have to delete from the STMFC web site,
but if you find and open your post from the Message list there will
be
a Delete option available at the upper right.

Tom Madden


SP Tank Car Domes

Tony Thompson
 

It was recently brought to my attention that awhile back on this list, it was asserted that some SP steam-era tank cars had 60-inch diameter domes. (I did not catch this in passing.) I have just checked drawings for O-50-9, O-50-12 and O-50-13 cars, and all had 54-inch diameter domes; photos confirm that these cars were all very similarly proportioned. The Tichy "large dome" part is 60 inches, and thus in my opinion cannot be used to correct the dome on an Athearn tank car, though it may provide the correct height. The Athearn dome, on the cylindrical part, is only about 10 scale inches high, and ought to be about 21 inches.
All the cars mentioned above had nominal 12,500-gallon capacity. The Class O-50-14 cars were 8000 gallons and appear to have similar if not smaller domes. If anyone can provide more (or better) information, I'd be delighted to hear it.

Tony Thompson Editor, Signature Press, Berkeley, CA
2906 Forest Ave., Berkeley, CA 94705 www.signaturepress.com
(510) 540-6538; fax, (510) 540-1937; e-mail, thompson@signaturepress.com
Publishers of books on railroad history


Proto48 Modeler Website Updated

Eugene Deimling <losgatos48@...>
 

The Proto48 Modeler website has been updated with new photos and information
including an article on making rivets by master locomotive builder, Tom Mix.


I want to thank our contributors and webmaster, George Losse, for their
support.



Happy Holidays,



Gene Deimling

Editor, The Proto48 Modeler

http://www.proto48.org <http://www.proto48.org/>


Re: Best source of lettering for HO B&O M-15 wagon-top rebuild

Dean Payne <deanpayne@...>
 

The most recent edition of the B&O modeler has an article on the M-
53, very similar to the M-15 rebuild.
borhs.org/ModelerMag/
The paint used was Polly Scale 414354 "Special Oxide Red". The color
does not appear to be "brown", but more of an oxide (no surprise).
The article states the two early lettering styles are "Early Kuhler"
(late 1937-early 1940) and "Wartime" (late 1940-mid 1945), but
doesn't specifically state this color is correct for both lettering
schemes. That is implied, however, as the author build one in each
scheme. I seem to remember Special Oxide Red as being the proper
color, but can't find my documentation right now, of course. Look in
the archives, maybe?
Dean Payne

--- In STMFC@yahoogroups.com, "jim_mischke" <jmischke@w...> wrote:


Color was "Freight Car Brown" in B&O literature.

It's the color of Kiwi brown shoe polish.

Westerfield sells older decals



--- In STMFC@yahoogroups.com, Rob Adams <steamera@n...> wrote:

Can someone recommend an HO scale lettering set for the B&O M-15
steel rebuilds as they would have appeared Circa 1938. Also, an
appropriate paint color (or mix). I prefer Scalecoat I or Floquil.

Thanks in advance.

Kind regards, Rob Adams


Re: PFE Reefer running boards (was especially NP)

Tony Thompson
 

Tim O'Connor wrote:
Tony, I have two PFE diagrams for the R-40-23 and although both
mention FIVE different hand brakes, TWO different running boards
and even FIVE different draft gears (for 50 permutations total),
they don't say which cars got which!
Obviously, TIm, you need way more data. <G>

P.S. Gene, the diagrams come from Dick Harley. I think he did make
copies for sale at one time. That's how I got copies.
Dick has occasionally made available partial or complete PFE diagram books, including a number of pages happily supplied by me. I don't think he now contemplates (or ever has contemplated) being the publisher and distributor of such books to a general audience. I will copy him on this e-mail and see what his reply may be. Maybe we can form up someone else to take this on, if Dick isn't going to do so.

Tony Thompson Editor, Signature Press, Berkeley, CA
2906 Forest Ave., Berkeley, CA 94705 www.signaturepress.com
(510) 540-6538; fax, (510) 540-1937; e-mail, thompson@signaturepress.com
Publishers of books on railroad history


Re: UTLX Tank Cars

Richard Hendrickson
 

On Dec 15, 2005, at 7:32 PM, Steve and Barb Hile wrote:

Here is some additional and corrected information.

UTLX 84999 was, indeed, a one of a kind car. It had a welded tank set on the very common standard UTLX X-3 riveted underframe. So, it could, theoretically be modeled by placing the Red Caboose tank on a Sunshine X-3 underframe. It was built in 1948.

UTLX 49000-49499 were 12000 gallon tanks that look similar to the Red Caboose car, but the tanks are 20% larger. I don't have dimensions, but would wager a guess that the increase was more in diameter than in lenght. They were built as ACF lot 3555A in 1951.

UTLX 39000-39499 were the 10000 gallon tanks the most closely match the Red Caboose car. These 500 cars were ACF lot 3555 in 1951. The underframes were NOT standard design UTLX, but rather more stock ACF.
Thanks, Steve. I hadn't realized that the 49000 series cars were 12K gals.; the only photo I have is a 3/4 view in which the larger tank isn't readily apparent.

Richard Hendrickson


Re: UTLX Tank Cars

Steve and Barb Hile
 

Here is some additional and corrected information.

UTLX 84999 was, indeed, a one of a kind car. It had a welded tank set on the very common standard UTLX X-3 riveted underframe. So, it could, theoretically be modeled by placing the Red Caboose tank on a Sunshine X-3 underframe. It was built in 1948.

UTLX 49000-49499 were 12000 gallon tanks that look similar to the Red Caboose car, but the tanks are 20% larger. I don't have dimensions, but would wager a guess that the increase was more in diameter than in lenght. They were built as ACF lot 3555A in 1951.

UTLX 39000-39499 were the 10000 gallon tanks the most closely match the Red Caboose car. These 500 cars were ACF lot 3555 in 1951. The underframes were NOT standard design UTLX, but rather more stock ACF.

I hope this helps.

Steve Hile

On Dec 15, 2005, at 6:16 AM, Tim O'Connor wrote:

> Richard Hendrickson wrote
>
>>> Largely true, however UTL bought 500 welded 10K ICC-103Ws from AC&F
>>> in
>>> 1951 (UTLX 49000-49499) that were built to the same AC&F design
>>> modeled by RC. Anyone who models 1951 or later (neither Bruce nor I
>>> do) can use a couple of these models lettered UTLX.
>
> The Red Caboose cars are lettered for 1949, e.g. UTLX #85301. So they
> have to be renumbered and get corrected new dates. Red Caboose also
> gave some of their government cars numbers belonging to GATC tanks.

Tim, that's probably because there is a published builder's photo of
UTLX 84999, which was built late in 1948, and RC "extrapolated" 85000
series numbers on that basis. However, 84999 was a one-off sample car,
and the 49000-49499 series, which were essentially identical, didn't
come along until three years later.

Richard Hendrickson



SPONSORED LINKS Train travel Freight car Canada train travel
Train travel in italy North american


------------------------------------------------------------------------------
YAHOO! GROUPS LINKS

a.. Visit your group "STMFC" on the web.

b.. To unsubscribe from this group, send an email to:
STMFC-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


------------------------------------------------------------------------------


Re: UTLX Decals.

Bill Kelly
 

Tony Thompson wrote:
Bruce is right to put quotes around "dome" for the jacketed tank
car, as the normally "proper" name is "valve casing." But in some
manufacturer literature and in the AAR tank car committee reports, that
feature is indeed called a "dome," so the industry wasn't entirely
consistent. But one does need to realize that the purpose of the dome
on an unpressurized car was to provide expansion space. Not only is
that not relevant in a pressurized car, there is virtually no interior
volume in a valve casing which could accept expansion.
Ed Hawkins added:
Tony,
Confirming your statement, the AC&F engineering drawings during the
1920s through 1950s consistently specified "dome housing" or "dome
arrangement" for nomenclature in the title blocks. This was the case
for all ICC classes of tank cars.
Regards,
Ed Hawkins
AAR Specifications for Tank Cars calls it simply a protective housing
while the Bureau of Explosives of the AAR calls it a dome, I guess they
can't decide. My AC&F information, while 1960s, calls it a protective
housing also. The UTC info, also 1960s, calls it a manway housing. My
favorite and the name I've used for years is from GATC. They call it a
manway bonnet.
Later,
Bill Kelly


Re: [NYC-Railroad] MDT/NYC reefers

Tim O'Connor
 

Roger,

You have to be careful what you write. I'm sure you meant to say
you haven't seen a photo of a white WOODEN car newer than 1942 ?

Tim O.

The other piece that doesn't jive is per the ORER, any car that had
originally been painted
white had been scrapped, renumbered or given a different reporting
mark by the early fifties.
The latest dated photo I have seen of a white car is 1942
Roger H.


Re: [NYC-Railroad] MDT/NYC reefers

Roger Hinman <rhinman@...>
 

The other piece that doesn't jive is per the ORER, any car that had originally been painted
white had been scrapped, renumbered or given a different reporting mark by the early fifties.

The latest dated photo I have seen of a white car is 1942

Roger H.

On Dec 15, 2005, at 12:12 AM, Richard Hendrickson wrote:

On Dec 14, 2005, at 6:53 PM, Roger Hinman wrote:

FYI, see below message relatiing to the white/yellow discussion.

Begin forwarded message:

FYI - During the late 50's, I walked a little over a
mile to high school. My daily walk took me along
Gibson Yard in Hammond to Columbia Ave, which was
located at the west end of Gibson yard. I remember in
the late 50's seeing dirty old white wood MDT reefers,
whole strings of them. Mixed in were orange/yellow
cars. By 1960, never saw a white reefer again.

Dale Florence
Roger, with all due respect to Dale Florence, I don't believe this, in
the absence of other evidence. And AFAIK there is NO other evidence.
If white wood sheathed cars survived into the late 1950s, how come no
one photographed them? We have lots of post-WW-II photos of MDT wood
sheathed reefers, and they're ALL painted orange. How accurate are
your memories of the late 1950s? I sure wouldn't trust mine!

Richard Hendrickson



------------------------ Yahoo! Groups Sponsor --------------------
~-->
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/9MtolB/TM
--------------------------------------------------------------------
~->


Yahoo! Groups Links





Re: MDT reefers

Roger Hinman <rhinman@...>
 

I don't believe you are going to find any either; the heralds were reintroduced with the steel cars;
heralds had last been used back in the 1920s when everything was white.

Roger H.

On Dec 15, 2005, at 12:44 AM, Ron Morse wrote:

More than one road used MDT reefers. The white with stripes were used
by the NYC in both wood and steel. Other roads used the orange as
well.WhatI have NOT found are photos of the wood cars in orange with
the NYC hearld. I would like to see photos of them if they did exist,
along with the dates. I have a cut off date of 1950.
I think what may be overlooked here is that I am inquiring about NYC
MDT cars, not just MDT, that makes a diference.
Ron Morse
NYC O scale in Springfield,MO.





------------------------ Yahoo! Groups Sponsor --------------------
~-->
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/9MtolB/TM
--------------------------------------------------------------------
~->


Yahoo! Groups Links





Re: PFE Reefer running boards (was especially NP)

Tim O'Connor
 

Tony, I have two PFE diagrams for the R-40-23 and although both
mention FIVE different hand brakes, TWO different running boards
and even FIVE different draft gears (for 50 permutations total),
they don't say which cars got which!

Tim O'Connor

P.S. Gene, the diagrams come from Dick Harley. I think he did make
copies for sale at one time. That's how I got copies.

The PFE diagram book shows that the R-40-23 class had both
Morton and U.S. Gypsum running boards; the R-40-25 had Apex, Morton,
and Gypsum running boards. I don't have handy the breakdown among car
orders to provide car numbers for each application. The reason
specialties like those were not tabulated in the book is that another
party planned, at the time we published the book, to reprint the PFE
diagram book for sale. As many will realize, that reprint never
occurred.

Tony Thompson


Re: Gould/Tichy tank car

tyesac@...
 

In a message dated 12/15/2005 11:25:15 AM Central Standard Time,
rhendrickson@opendoor.com writes:
on by Bob
Hundman, he thought the drawings were all he needed and neither Gould
nor Hundman realized until after the model was completed that there was
no prototype for it.
That line of dialog used by Don Adams' character in that 60's TV spy spoof
"Get Smart" comes to mind here: "missed it by just that much"!

At least it's a good thing that Gould/Tichy didn't repeat that error with
their later cars. Makes me wonder why they couldn't salvage some of the tank car
by reissuing the frame under a correct tank.

Tom C


Re: ART Reefer Book - Call for Information

al_brown03
 

There's an in-service picture of ART 18951 in the March 1989 Model
Railroading, p 54; it's credited to the Gene Semon collection.

Al Brown, Melbourne, Fla.

--- In STMFC@yahoogroups.com, asychis@a... wrote:

Hello All,

There is a book being prepared on the American Refrigerator
Transit Company.
No specifics on when it will be published, but it is nearing the
time when
the final draft is being sent by the authors to the publisher for
revision.

This message is a call for information on ART, including photos,
information,
personal remembrances, etc. We don't need a lot of information on
the common
cars, but we are interested in rarer photos, photos of facilities,
painting
information, erection drawings, and diagrams (especially for the
wooden cars).
For instance, there was a series of five single-sheathed outside-
braced
reefers in the 18950-18954 series for which we have a builder's
photo from the
1920s but no others. At some time in the past at train shows I
have see a photo
of one of these cars with a small ART shield and probably a 1930-
40s era paint
scheme. Would sure like to find this photo.

So, if you want to help out, here is an opportunity to get
information to us
before the book is finalized published.

Thanks for any and all help.

Jerry Michels




Re: Reefer running boards, especially NP

Tony Thompson
 

Is the "diagram book" idea dead?
No, but we have no current plans to do one. We have diagrams from 1906 to the 1970s.

Tony Thompson Editor, Signature Press, Berkeley, CA
2906 Forest Ave., Berkeley, CA 94705 www.signaturepress.com
(510) 540-6538; fax, (510) 540-1937; e-mail, thompson@signaturepress.com
Publishers of books on railroad history


Re: UTLX Decals.

Tony Thompson
 

Pat Wider wrote:
Tony, I've posted a photo illustrating the interior of a pressure tank car valve casing in the
files section. A picture is worth a thousand words.
Yes, a photo is most useful here. There are a bunch more in Kaminski's tank car book.

Tony Thompson Editor, Signature Press, Berkeley, CA
2906 Forest Ave., Berkeley, CA 94705 www.signaturepress.com
(510) 540-6538; fax, (510) 540-1937; e-mail, thompson@signaturepress.com
Publishers of books on railroad history


New file uploaded to STMFC

STMFC@...
 

Hello,

This email message is a notification to let you know that
a file has been uploaded to the Files area of the STMFC
group.

File : /MILW 6948 (model).jpg
Uploaded by : patrickwider <pwider@sbcglobal.net>
Description : MILW 6948 Model by Richard Hendrickson

You can access this file at the URL:
http://groups.yahoo.com/group/STMFC/files/MILW%206948%20%28model%29.jpg

To learn more about file sharing for your group, please visit:
http://help.yahoo.com/help/us/groups/files

Regards,

patrickwider <pwider@sbcglobal.net>

137361 - 137380 of 186253