Date   

S scale SR waffle boxes all shipped

Jim King
 

To those who ordered the new S scale Southern Ry. 1973 50' waffle side
boxcar kit, I thank you. All shipments have been made with the last 3 going
out yesterday. For your convenience, the 8-page instruction "booklet" has
been uploaded to the waffle web page in .pdf format.



Next kits will be the SR 1951 pulpwood rack in Roman and Block font. Get
your deposits to me as soon as you can in order to ensure prompt delivery.



All kits decals are available separately at $6 each postpaid in the "Lower
48". There will be a separate web page created soon listing decals and
detail parts.



The GE 70-tonner will follow the wood rack in January or February.



Jim King

Smoky Mountain Model Works, Inc.

www.smokymountainmodelworks.com


Re: Pipe loads on the cheap

Roland Levin
 

Hi



I have found black straws here in Sweden. The straight part is about 45
scale feet. Takes away all the problems with painting. You just have to
airbrush them with a dull coat. I would be surprised if you couldn’t find
them in US as well. Try to find them in shops which sell Halloween party
items.





Roland Levin

Vällingby, Sweden

hem.bredband.net/drgw







Från: STMFC@... [mailto:STMFC@...] För Gene Green
Skickat: den 29 november 2008 16:35
Till: STMFC@...
Ämne: [STMFC] Re: Pipe loads on the cheap



--- In STMFC@... <mailto:STMFC%40yahoogroups.com> , Dennis
Williams <pennsy6200@...> wrote:
<snip> If you have a blaster, etch them B4 painting.
Etching is a very good idea. I made a pipe load with plastic straws
and painted the load with Floquil (old formula) with no etching.
Eventually the paint started flaking off even though the load wasn't
being handled.

Gene Green





[Non-text portions of this message have been removed]


Re: Pipe loads on the cheap

Gene Green <bierglaeser@...>
 

--- In STMFC@..., Dennis Williams <pennsy6200@...> wrote:
<snip> If  you have a blaster, etch them B4 painting.
Etching is a very good idea. I made a pipe load with plastic straws
and painted the load with Floquil (old formula) with no etching.
Eventually the paint started flaking off even though the load wasn't
being handled.

Gene Green


Norfolk Southern box car

Charles Hladik
 

List,
The Carolina Piedmont Division of the Mid-Eastern Region of the NMRA has
acquired some box cars as a fund raiser.
They are 40 foot Accurail PS-1s painted by Bowser. They are Gray with
the Red N and Black S and a DF label and a built date of 7-57. They have 8 foot
door. The ends are gray and not the prototypical black. The numbers are,
1599, 1600, 1624, 1631, 1645, 1676, 1679 and 1700.
Cost is $15.00 per car and s/h is $5.00 for the first car. $2.50 more
for up to 3 more cars. If you want all 8 numbers, shipping total will be $10.00.
Make checks payable to:
CPD-NMRA.
Send To:
John A. Janosko
264 White Cedar Lane
Youngsville, N.C. 27596
_johnajan@... (mailto:johnajan@...)
919-656-6897

Thanks,
Chuck Hladik
Rutland railroad
Virginia Division

**************Life should be easier. So should your homepage. Try the NEW
AOL.com.
(http://www.aol.com/?optin=new-dp&icid=aolcom40vanity&ncid=emlcntaolcom00000002)


Re: Rivets

Guy Wilber
 

In a message dated 11/28/2008 4:05:24 PM Central Standard Time,
ch00ch00@... writes:

During the early 1900's, the PRR used a rivet that went into a 13/16"
hole. Does anyone know what size the Rivet was, or is?

Ed,

Are you certain the hole was 13/16" diameter or was the rivet itself that
dimension? Adopted as standard in 1917 The MCB chart shows 13/16" rivets with
a button head 1 27/64" diameter.

Regards,

Guy Wilber
Brown Deer, WI


**************Finally, one site has it all: your friends, your email, your
favorite sites. Try the NEW AOL.com.
(http://www.aol.com/?optin=new-dp&icid=aolcom40vanity&ncid=emlcntaolcom00000006)


Re: Polymer Corp., Ltd / Polysar tank cars

Frederick Freitas <prrinvt@...>
 

Guyz,
 
         Now this discussion is way over my head.  The only thing I know is advertised as 'living latex' is in the ladies section of the store. Now, where did the tank car info get lost?
It sounded like a very interesting car for industry on a model RR.
 
Fred Freitas

--- On Fri, 11/28/08, al_brown03 <abrown@...> wrote:

From: al_brown03 <abrown@...>
Subject: [STMFC] Re: Polymer Corp., Ltd / Polysar tank cars
To: STMFC@...
Date: Friday, November 28, 2008, 9:45 PM






I should preface this by saying I'm a small-molecule organic chemist
not a polymer chemist. But a colleague of mine *is* a polymer chemist
& I'll check this w/him. But, he's a Dean & subject to capture by
bureaucrats, so no promises on timing.

That said: the metal inside of an un-lined tank car is a reducing
environment, chemically; which can cause polymerization.
(Polymerization can be caused by reducing agents, oxidizing agents,
acids, free radicals: almost anything reactive.) I'm not sure, but I
suspect the word "latex" may be used two different ways: to mean a
latex polymer, like latex gloves, or to mean a latex "living" polymer
like what Mr. Valoczy describes. But at a quick guess, if one lined a
tank car with a latex polymer, I don't think it would react with
a "living" latex, whereas a metal tank might.

FWIW, HTH --

-- Al Brown, Melbourne, Fla.

--- In STMFC@yahoogroups. com, destron@... wrote:



And it's hard to think of anything made of latex that would be
corrosive and dangerous to put into an unlined tank car. But then,
you're the materials guy, and you have a better chance of knowing
than I do . . .

If it'd make a difference.. . the latices in question would probably
be things like unfinished (i.e., uncoagulated) styrene-butadiene or
other synthetic rubbers. The liquid output after the ingredients
(styrene and butadiene for SB rubber, aka GR-S or Buna-S) are co-
polymerized (using other chemicals as catalysts, emulsifiers and
retardants) is called a latex; the latex is then fed into another
tank, where it's mixed with brine and sulphuric acid to make it
coagulate into little flakes of solidified rubber that's then baled
and shipped off in 40lb bales (likely the contents of the UP boxcar
I saw in another photo of the Polymer Corp. plant).

Now, whether this latex described above would be corrosive or
otherwise dangerous to put into an unlined tank car, I don't
know... perhaps someone who understands polymer chemistry a bit
more could answer that.

Frank Valoczy
Vancouver, BC














[Non-text portions of this message have been removed]


Re: Polymer Corp., Ltd / Polysar tank cars

al_brown03
 

I should preface this by saying I'm a small-molecule organic chemist
not a polymer chemist. But a colleague of mine *is* a polymer chemist
& I'll check this w/him. But, he's a Dean & subject to capture by
bureaucrats, so no promises on timing.

That said: the metal inside of an un-lined tank car is a reducing
environment, chemically; which can cause polymerization.
(Polymerization can be caused by reducing agents, oxidizing agents,
acids, free radicals: almost anything reactive.) I'm not sure, but I
suspect the word "latex" may be used two different ways: to mean a
latex polymer, like latex gloves, or to mean a latex "living" polymer
like what Mr. Valoczy describes. But at a quick guess, if one lined a
tank car with a latex polymer, I don't think it would react with
a "living" latex, whereas a metal tank might.

FWIW, HTH --

-- Al Brown, Melbourne, Fla.

--- In STMFC@..., destron@... wrote:



And it's hard to think of anything made of latex that would be
corrosive and dangerous to put into an unlined tank car. But then,
you're the materials guy, and you have a better chance of knowing
than I do . . .

If it'd make a difference... the latices in question would probably
be things like unfinished (i.e., uncoagulated) styrene-butadiene or
other synthetic rubbers. The liquid output after the ingredients
(styrene and butadiene for SB rubber, aka GR-S or Buna-S) are co-
polymerized (using other chemicals as catalysts, emulsifiers and
retardants) is called a latex; the latex is then fed into another
tank, where it's mixed with brine and sulphuric acid to make it
coagulate into little flakes of solidified rubber that's then baled
and shipped off in 40lb bales (likely the contents of the UP boxcar
I saw in another photo of the Polymer Corp. plant).

Now, whether this latex described above would be corrosive or
otherwise dangerous to put into an unlined tank car, I don't
know... perhaps someone who understands polymer chemistry a bit
more could answer that.

Frank Valoczy
Vancouver, BC


S scale SR 1951 wood rack web link

Jim King
 

A few of you contacted me re: Yahoo stripping the photo attachments from a
recent product announcement. The web page has since been created .. there
are a couple of code typos that need to be fixed but the primary reason for
sending this email is to allow y'all to view the proto pix and pricing info.



Click on either image to look at an enlarged version. Credit Larry Goolsby
for the "block font" photo and the SRHA, Inc.'s Archives for the "roman
font" view taken at Spencer Shops prior to car being released for revenue
service.



Due to problems encountered with waffle box verbal/email reservations not
being honored, I am requiring a non-refundable 50% deposit for all wood rack
orders. Since this is a done-deal kit, available by early January '09, you
won't lose your deposit or be delayed in getting your kit(s) as has
sometimes occurred with other manufacturers over the years.



Here is the web page link:
http://www.smokymountainmodelworks.com/soupulpwood.html



Contact me off list if you have questions about payment options, shipping
outside the "48", etc. Folks sending in deposits will be given priority
service when production starts.



Jim King

Smoky Mountain Model Works, Inc.

www.smokymountainmodelworks.com


Re: Rivets

Ed Schleyer
 

Thank you. I would appreciate that, 1'm doing a 2 dimensional CAD
drawing and I would like the rendering to be accurate.
Ed Schleyer
ch00ch00@... - - those are zero's - not Oh's



--- In STMFC@..., "Jack Burgess" <jack@...> wrote:

There was an article on rivets in Mainline Modeler, probably the
April 1997
one by Gene Green. If you don't have that issue, I'll look it up
for you.

Jack Burgess
www.yosemitevalleyrr.com


During the early 1900's, the PRR used a rivet that went into a
13/16"
hole. Does anyone know what size the Rivet was, or is?
Of all the drawings of the "sills" that I have had a chance to
see,
there is NO reference to size of rivet. By 1950's standards, the
rivet
would be 1/32" smaller than the hole. Doesn't seem that there
would be
that many nonstandard rivets made.
Ed Schleyer


------------------------------------

Yahoo! Groups Links



Re: Rivets

Jack Burgess <jack@...>
 

There was an article on rivets in Mainline Modeler, probably the April 1997
one by Gene Green. If you don't have that issue, I'll look it up for you.

Jack Burgess
www.yosemitevalleyrr.com

During the early 1900's, the PRR used a rivet that went into a 13/16"
hole. Does anyone know what size the Rivet was, or is?
Of all the drawings of the "sills" that I have had a chance to see,
there is NO reference to size of rivet. By 1950's standards, the rivet
would be 1/32" smaller than the hole. Doesn't seem that there would be
that many nonstandard rivets made.
Ed Schleyer


------------------------------------

Yahoo! Groups Links



Rivets

Ed Schleyer
 

During the early 1900's, the PRR used a rivet that went into a 13/16"
hole. Does anyone know what size the Rivet was, or is?
Of all the drawings of the "sills" that I have had a chance to see,
there is NO reference to size of rivet. By 1950's standards, the rivet
would be 1/32" smaller than the hole. Doesn't seem that there would be
that many nonstandard rivets made.
Ed Schleyer


Extreme Trains this Tuesday on the History Channel

lnbill <bwelch@...>
 

I note that on the History Channel's series "Extreme Trains" that next
Tuesday's episode features a contemporary reefer train. The
description says it also covers the competition between truck and
trains in the 1950's. These histroical retrospective often feature
interesting vintage footage.

By the mid-1930's Fruit Growers Express was complaining about
competion from trucks as they were not regulated and could charge
whatever they wanted to. A pair of drivers could have a load to NYC in
two days and could charge a premium because their load was several
days fresher.

The show aires at 10 PM EST with reruns throughout the week.

Bill Welch


Re: Norfolk Southern boxcar model - was Norfolk Southern color

James F. Brewer <jfbrewer@...>
 

Chuck,

Many thanks.

Jim

----- Original Message -----
From: RUTLANDRS@...
To: STMFC@...
Sent: Friday, November 28, 2008 9:19 AM
Subject: Re: [STMFC] Norfolk Southern boxcar model - was Norfolk Southern color


Jim,
I will forward this to them.
Chuck Hladik


In a message dated 11/27/2008 10:25:17 A.M. Eastern Standard Time,
jfbrewer@... writes:

Chuck,

Any further info on this model? I'd probably order one; I checked the MER,
NMRA web site but didn't see it listed there. Thanks.

Jim Brewer
Glenwood MD

----- Original Message -----
From: _RUTLANDRS@... (mailto:RUTLANDRS@...)
To: _STMFC@... (mailto:STMFC@...)
Sent: Wednesday, November 26, 2008 11:02 PM
Subject: Re: [STMFC] Norfolk Southern color

Lou,
I'm forwarding this to the NMRA Division near Raleigh, N.C. They just
had a run made of an original NS boxcar.
Chuck Hladik

In a message dated 11/26/2008 9:45:04 P.M. Eastern Standard Time,
_octoraro1@... (mailto:octoraro1@...) writes:

__http://images.http://images.<Whttp://imagehttp://imagehttp://ima&<WBR>imgurl
=_
(http://images.http//imaghttp://imagehttp://imagehttp://imaghttp&imgurl=imgur)
l=<WBR>4617_
(_http://images.http://imaghttp://imagehttp://imagehttp://imaghttp&imgurl=imgu
rl=<WBR>4617_
(http://images.google.com/hosted/life/l?q=freight+car+source:life&imgurl=4617f3a9036aa1cd) ) popped up among the Life photos. This is a
terrific resource.

--- On Sat, 10/4/08, Louis C. Whiteley <__octoraro1@...
(mailto:_octoraro1@...) _
(mailto:_octoraro1@... (mailto:octoraro1@...) ) > wrote:

From: Louis C. Whiteley <__octoraro1@...
(mailto:_octoraro1@...) _
(mailto:_octoraro1@... (mailto:octoraro1@...) ) >
Subject: [STMFC] Norfolk Southern color
To: __STMFC@... (mailto:_STMFC@...) _
(mailto:_STMFC@... (mailto:STMFC@...) )
Date: Saturday, October 4, 2008, 10:21 AM

Can anyone suggest appropriate colors for the Norfolk Southern XM-3
(25500-series, Magor, 1942) and XM-5 (27000-series, P-S, 1947) boxcars
as delivered? I appreciate any leads -- formula, color photo source,
or "similar to . . ."?

Thank you.

Lou Whiteley
Lawrenceville, NJ



************************<WBR>**Life should be easier. So should your homep
AOL.com.
(_http://www.aol.http://www.http:/&icid=icid=<WBR>aolc&<WBR>ncid=emlcnt<WBR>nc
id_
(http://www.aol.com/?optin=new-dp&icid=aolcom40vanity&ncid=emlcntaolcom00000002) )





**************Life should be easier. So should your homepage. Try the NEW
AOL.com.
(http://www.aol.com/?optin=new-dp&icid=aolcom40vanity&ncid=emlcntaolcom00000002)


Re: Electrical Transformers

Mark
 

Good Day, Bruce.

Don mentioned Stewart, Selley has some transformers too.

http://bowser-trains.com/hoother/selley/Selley%20Drawings%20HO.pdf

Sincerely, Mark Morgan

--- On Fri, 11/28/08, Donald B. Valentine <riverman_vt@...> wrote:
From: Donald B. Valentine <riverman_vt@...>
Subject: [STMFC] Re: Electrical Transformers
To: STMFC@...
Date: Friday, November 28, 2008, 7:31 AM











I, too, wonder about "brand identification" here, Bruce, but do

not seem to recall large transformers with square ends until into the

1960's. It may be a question of cheaper to fabricate just as it has

been with locomotive housing. I wonder, however, if you might have

overlooked the Stewart Products cast metal transformers with the

rounded ends. These may no longer be available but were offered for

years and made great loads for deep well center flat cars. One would

make a great pattern for additional castings in resin.



Take care, Don Valentine



--- In STMFC@yahoogroups. com, "Bruce Smith" <smithbf@... > wrote:

Folks,
In looking at the Walthers Northern Power and Light Substation, it
looks

like there are a number of transformers that might make interesting
loads.

My concern is that the main transformer has relative sharp
corners - ie a

very boxy shape. Many older transformers seem to have rounded
ends. When

did box shaped transformers come into use?
Regards
Bruce
Bruce Smith
Auburn, AL




























[Non-text portions of this message have been removed]


Re: UP A-50-12 (converted to bunk car) about to be scrapped

Schuyler Larrabee
 

Hi Folks

A UP A-50-12 (converted to bunk car) sitting in Laramie is about to be
scrapped. It was built by Ralston Steel Car Company in 1929, one of
the series 152001-152500. As far as I can tell it is still on its
original trucks.

Are there any particular photos or measurements anyone wants before the
car is gone forever? If so, contact me off list. The car is in
excellent shape.

Best wishes,
Larry Ostresh
Laramie, Wyoming
Our leader Mr Brock was quite restrained in his response, but since you likely have a digital
camera, and digital images take virtually (snicker) no space, and could be put on a CD if they
challenge your hard drive capacity, I'd suggest you head out and take as many images as your
patience will stand. Underbody images would, as Mike said, be very useful, but all kinds of details
should be covered because once this is gone, it won't be possible to document it then. Many of us
take the standard 3/4 views, and call it done, but when you start to model something, there is
always< ONE more view that you wish had been taken.
Case in point: I am building the shake-n-take model Greg Martin organized, but I cannot find a view
that shows what kind of bracket was used to support the air hose. It's obscured by the coupler in
the one truly worthwhile photo I have to work with.

SGL


Re: UP A-50-12 (converted to bunk car) about to be scrapped

Mike Brock <brockm@...>
 

Larry Ostresh writes:

"A UP A-50-12 (converted to bunk car) sitting in Laramie is about to be
scrapped. It was built by Ralston Steel Car Company in 1929, one of
the series 152001-152500. As far as I can tell it is still on its
original trucks.

Are there any particular photos or measurements anyone wants before the
car is gone forever? If so, contact me off list. The car is in
excellent shape."

It might be useful to have photos of the car in general but, in particular, the underbody details might be useful.

Mike Brock
Modeling Laramie in 1953


UP A-50-12 (converted to bunk car) about to be scrapped

laramielarry <ostresh@...>
 

Hi Folks

A UP A-50-12 (converted to bunk car) sitting in Laramie is about to be
scrapped. It was built by Ralston Steel Car Company in 1929, one of
the series 152001-152500. As far as I can tell it is still on its
original trucks.

Are there any particular photos or measurements anyone wants before the
car is gone forever? If so, contact me off list. The car is in
excellent shape.

Best wishes,
Larry Ostresh
Laramie, Wyoming


Re: Electrical Transformers

Donald B. Valentine <riverman_vt@...>
 

I, too, wonder about "brand identification" here, Bruce, but do
not seem to recall large transformers with square ends until into the
1960's. It may be a question of cheaper to fabricate just as it has
been with locomotive housing. I wonder, however, if you might have
overlooked the Stewart Products cast metal transformers with the
rounded ends. These may no longer be available but were offered for
years and made great loads for deep well center flat cars. One would
make a great pattern for additional castings in resin.

Take care, Don Valentine

--- In STMFC@..., "Bruce Smith" <smithbf@...> wrote:

Folks,

In looking at the Walthers Northern Power and Light Substation, it
looks
like there are a number of transformers that might make interesting
loads.
My concern is that the main transformer has relative sharp
corners - ie a
very boxy shape. Many older transformers seem to have rounded
ends. When
did box shaped transformers come into use?

Regards
Bruce

Bruce Smith
Auburn, AL


Re: Norfolk Southern boxcar model - was Norfolk Southern color

Charles Hladik
 

Jim,
I will forward this to them.
Chuck Hladik

In a message dated 11/27/2008 10:25:17 A.M. Eastern Standard Time,
jfbrewer@... writes:




Chuck,

Any further info on this model? I'd probably order one; I checked the MER,
NMRA web site but didn't see it listed there. Thanks.

Jim Brewer
Glenwood MD

----- Original Message -----
From: _RUTLANDRS@... (mailto:RUTLANDRS@...)
To: _STMFC@... (mailto:STMFC@...)
Sent: Wednesday, November 26, 2008 11:02 PM
Subject: Re: [STMFC] Norfolk Southern color

Lou,
I'm forwarding this to the NMRA Division near Raleigh, N.C. They just
had a run made of an original NS boxcar.
Chuck Hladik

In a message dated 11/26/2008 9:45:04 P.M. Eastern Standard Time,
_octoraro1@... (mailto:octoraro1@...) writes:

__http://images.http://images.<Whttp://imagehttp://imagehttp://ima&<WBR>imgurl
=_
(http://images.http//imaghttp://imagehttp://imagehttp://imaghttp&imgurl=imgur)
l=<WBR>4617_
(_http://images.http://imaghttp://imagehttp://imagehttp://imaghttp&imgurl=imgu
rl=<WBR>4617_
(http://images.google.com/hosted/life/l?q=freight+car+source:life&imgurl=4617f3a9036aa1cd) ) popped up among the Life photos. This is a
terrific resource.

--- On Sat, 10/4/08, Louis C. Whiteley <__octoraro1@...
(mailto:_octoraro1@...) _
(mailto:_octoraro1@... (mailto:octoraro1@...) ) > wrote:

From: Louis C. Whiteley <__octoraro1@...
(mailto:_octoraro1@...) _
(mailto:_octoraro1@... (mailto:octoraro1@...) ) >
Subject: [STMFC] Norfolk Southern color
To: __STMFC@... (mailto:_STMFC@...) _
(mailto:_STMFC@... (mailto:STMFC@...) )
Date: Saturday, October 4, 2008, 10:21 AM

Can anyone suggest appropriate colors for the Norfolk Southern XM-3
(25500-series, Magor, 1942) and XM-5 (27000-series, P-S, 1947) boxcars
as delivered? I appreciate any leads -- formula, color photo source,
or "similar to . . ."?

Thank you.

Lou Whiteley
Lawrenceville, NJ

[Non-text portions of this message have been removed]

************************<WBR>**Life should be easier. So should your homep
AOL.com.
(_http://www.aol.http://www.http:/&icid=icid=<WBR>aolc&<WBR>ncid=emlcnt<WBR>nc
id_
(http://www.aol.com/?optin=new-dp&icid=aolcom40vanity&ncid=emlcntaolcom00000002) )

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]




**************Life should be easier. So should your homepage. Try the NEW
AOL.com.
(http://www.aol.com/?optin=new-dp&icid=aolcom40vanity&ncid=emlcntaolcom00000002)


Re: Polymer Corp., Ltd / Polysar tank cars

destron@...
 

Steve,

My guess, to judge from both what the earlier-mentioned C&O employee and
the hints in the photograph suggest, is that the meaning of the entry is
that the car is insulated, and used for transporting latex. It doesn't
mention what sort of insulation it is? I could see it being some sort of
thermal insulation to prevent extremes of temperature?

Frank Valoczy
Vancouver, BC

The entry in the UTLX listing is very cryptic, consisting of

INSULATED
LATEX

at the top of the column with the car numbers. There are a number of car
groups with INSULATED, but this series is the only one with LATEX.

Steve Hile
----- Original Message -----
From: Anthony Thompson
To: STMFC@...
Sent: Thursday, November 27, 2008 4:29 PM
Subject: Re: [STMFC] Polymer Corp., Ltd / Polysar tank cars


Frank Valoczy wrote:
> . . . they moved a lot of latices in tank cars (which I assume would
> have been cars like this . . .

I assume this plural is formed by false analogy with "index,
indices?" <g>

> Would the latex lining not react somehow with the latex then loaded
> into the tank?

The statement of "latex lining" could have meant
"latex-resistant lining."

Tony Thompson Editor, Signature Press, Berkeley, CA
2906 Forest Ave., Berkeley, CA 94705 www.signaturepress.com
(510) 540-6538; fax, (510) 540-1937; e-mail, thompson@...
Publishers of books on railroad history








------------------------------------

Yahoo! Groups Links




!DSPAM:1291,492f80e789283042225882!

Frank Valoczy
Vancouver, BC

119521 - 119540 of 196832