Date   

Re: Prototype info from model mfgs

riverman_vt <riverman_vt@...>
 

--- In STMFC@yahoogroups.com, SUVCWORR@... wrote:


In part:



Also, to give credit where due, Atlas does list the paint dates of some but not all of their freight cars on their website but not on the box labels.

Correct me if I'm wrong here but it strikes me that Atlas has been doing this on their website for some years now but simply have not gone back and provided the info for those cars offered prior to their doing so. This first became apparent to me with their 11,000 gal. LPG cars. The first run was made prior to their providing such information on their website but it is available for every run produced since. Is this not correct?


Take care, Don Valentine


freight car kit discounts

ed_mines
 

Anyone know somewhere which discounts Atlas 1932 box cars?

Has F&C recently been offering 2 for one at shows?

Any of the other resin manufacturers having sales?

Ed


Re: Prototype info from model mfgs

Charlie Vlk
 

No, the manufactuers do not have all the information that some modelers would like to have (for example, the first instance of a paint scheme being applied and the last car in service to carry the paint scheme).

Often times a manufacturer is working off of one photo of a car. Some artwork is prepared by people that have an interest in and some knowledge of the prototype and Model Railroading, but many are done by commecial artists that create an artwork to the best of their skill and ability who have little personal interest in the subject beyond the job.

Some art is dead accurate for the car depicted.... I make a practice of doing correct lettering for all data that I can see in photos... but some cars come through with fairly generic lettering when it gets down to the small data. The data for in-service cars and even cars when new will vary between cars (new date, repack / repaint dates and locations) but often it is not possible or practical to have dead accurate details down to the last nth for multiple roadnumbers of the same paint scheme... only the car numbers will be changed.

If someone is interested in limiting their purchases to cars that have reweigh and other data suitable for a narrow time frame, they can certainly do some modeling and restencil the cars. Maybe it should have been called Modeling Railroads instead of Model Railroading!

I would imagine that between the various on-line vendors, eBay, and other online sources one can probably come up with images of most items that have been produced. Given today's small batch production that allows for the great variety of continous new products I don't see any advantage for a manufacturer to try to maintain a encycopedia of all past products.... they are primarily interested in moving their new product into the distribution pipeline.... the wholesalers and retailers get a discount off of MSRP to move the product off of their shelves.

Where does the notion that manufacturers should provide research on their products end? Should it be required to provide a useage history of each car so that a person doesn't purchase a car that did not ever show up on the rails of the road that they model? Most manufacturers do show a reasonably sharp image (either online or in their advertisements) of the product when it is announced. I don't see any reason a manufacturer would include or post a two page brochure of fine print disclaimers similar to drugs about each car or locomotive they make....giving all sorts of reasons why a product should not be purchased by a very small segment of the market.

The internet can be used to do one's own research.... it isn't just for posting requests or the desire for it to be done by others!!! If one is going to limit their scope to a particular time range it is incumbant on that individual to do the research to figure out what that entails, not the manufacturers!

Charlie Vlk
Railroad Model Resources


Re: Cutting styrene sheet into narrow strips...

ed_mines
 

--- In STMFC@yahoogroups.com, "stevelucas3" <stevelucas3@...> wrote:
I made a tool that uses a pair of razor blades (steel backing removed first) with a .020" styrene spacer between them. A 2" long piece of 1" wide by .032" thick brass strip, with three holes drilled in it to hold 4-40 screws, serves as the handle.

The blades and shim are assembled, the screws pushed through them and into the holes drilled in the handle. A 1/4" nut driver is used to tighten the nuts, and we have our tool.

I draw the tips of the blade at about a 30-degree angle along a steel straightedge across a sheet of .005" styrene, and can produce approximate .050" wide strips.

I tried making a similar tool without the spacer for .030" wide strips, but found that the blades flex too much for consistent width strips. Maybe a backing piece on the exposed side of the blades would help prevent blade flexing. But Evergreen makes .010" x .030" strips--I'll can live with the overthickness of these strips as the outside member of the Z's.


Steve, why don't you try using 2 - #11 X-Acto blades with a spacer as a scriber or even better use 2 - #11 surgical blades (much sharper).

These blades are pretty rigid.

Ed


Re: Prototype info from model mfgs

Mark
 

I have found interest in this topic. One of our LHS stocks Branchline. I have bought at least a dozen and built half. He has not restocked these but there is still a fifty footer selection and a few reefers.
He knocks off a little and always asks how they are to build.

Mark Morgan

--- On Mon, 8/24/09, SUVCWORR@aol.com <SUVCWORR@aol.com> wrote:

From: SUVCWORR@aol.com <SUVCWORR@aol.com>
Subject: Re: [STMFC] Re: Prototype info from model mfgs
To: STMFC@yahoogroups.com
Date: Monday, August 24, 2009, 11:28 AM






 











If I don't have the car, I

can't answer the question easily.? That does not mean I cannot get the

information or don't have it from previously stocking the car.



As to why the information is not readily available from most

manufacturers, in my opinion it is the fear of lost sales and that those who blindly

buy cars etc will become educated to the correct P/L and car details

for the era they model..? As Bruce stated his LHS will order but won't

take back a car that is out of era for him.? The sale is the sale and

final.? I prefer to not alienate a customer by such action which may be

why I am a very small dealer and have found that providing such

information more often than not results in a sale that I otherwise

would not have made.? If the dates matter, the sale is not going to be

made if there is doubt about the era of the car.? Even with that

mistakes do occur regarding exactly when a paint scheme changed etc.



This seems to be wandering away from the purpose of this list so I will stop here rather than risk jail.



Rich



-----Original Message-----

From: bierglaeser <bierglaeser@ yahoo.com>

To: STMFC@yahoogroups. com

Sent: Mon, Aug 24, 2009 9:35 am

Subject: [STMFC] Re: Prototype info from model mfgs



Rich,

How do you answer the question if you don't have the car in stock? The nearest

decent hobby shop doesn't carry very much Branchline stock so am I to be

restricted to choosing only among the items he stocks?



Bruce,

100 miles?!?! That's local. Try 275 miles to the dealer mentioned in the above

paragraph.



Bruce, I agree with you. If Al can do it, they all can. There's no point in

keeping that information secret. I suppose for many, perhaps most, modelers the

information is important. Maybe they don't even know what it means but for a

few of us, it matters.



Gene Green



--- In STMFC@yahoogroups. com, Bruce Smith <smithbf@... > wrote:

On Aug 24, 2009, at 12:14 AM, SUVCWORR@... wrote:
Gene,
I answer these questions from customers all the time.? So you
should be able to ask your dealer before buying.
Rich Orr
Dealer? What dealer? I live more than 100 miles from the nearest
hobby shop that knows anything about or carries Branchline. Yes, my
local USA Hobbies will order them for me (at full price plus the 8%
local sales tax) but he doesn't give refunds based on paint schemes
or reweigh dates not being appropriate for my era. As I have noted
before, if Al Westerfield can provide an accurate timeline for each
car in an on-line web format, I'm baffled as to why others find it
apparently so difficult.
Regards
Bruce
Bruce F. Smith
Auburn, AL
http://www.vetmed. auburn.edu/ index.pl/ bruce_f._ smith2
"Some days you are the bug, some days you are the windshield."
__
/ &#92;
__<+--+>____ _________ ___&#92;__/__ _ ____________ _________ _________ __
|- ______/ O O &#92;_______ -| | __ __ __ __ __ __ __ __ |
| / 4999 PENNSYLVANIA 4999 &#92; | ||__||__||__ ||__||__| |__||__|| __||
|/__________ _________ _________ _&#92;|_|____ _________ _________ _________ _|
| O--O &#92;0 0 0 0/ O--O | 0-0-0 0-0-0


------------ --------- --------- ------



Yahoo! Groups Links



[Non-text portions of this message have been removed]































[Non-text portions of this message have been removed]


Re: Prototype info from model mfgs

SUVCWORR@...
 

If I don't have the car, I
can't answer the question easily.? That does not mean I cannot get the
information or don't have it from previously stocking the car.



As to why the information is not readily available from most
manufacturers, in my opinion it is the fear of lost sales and that those who blindly
buy cars etc will become educated to the correct P/L and car details
for the era they model..? As Bruce stated his LHS will order but won't
take back a car that is out of era for him.? The sale is the sale and
final.? I prefer to not alienate a customer by such action which may be
why I am a very small dealer and have found that providing such
information more often than not results in a sale that I otherwise
would not have made.? If the dates matter, the sale is not going to be
made if there is doubt about the era of the car.? Even with that
mistakes do occur regarding exactly when a paint scheme changed etc.

This seems to be wandering away from the purpose of this list so I will stop here rather than risk jail.

Rich

-----Original Message-----
From: bierglaeser <bierglaeser@yahoo.com>
To: STMFC@yahoogroups.com
Sent: Mon, Aug 24, 2009 9:35 am
Subject: [STMFC] Re: Prototype info from model mfgs










Rich,
How do you answer the question if you don't have the car in stock? The nearest
decent hobby shop doesn't carry very much Branchline stock so am I to be
restricted to choosing only among the items he stocks?

Bruce,
100 miles?!?! That's local. Try 275 miles to the dealer mentioned in the above
paragraph.

Bruce, I agree with you. If Al can do it, they all can. There's no point in
keeping that information secret. I suppose for many, perhaps most, modelers the
information is important. Maybe they don't even know what it means but for a
few of us, it matters.

Gene Green

--- In STMFC@yahoogroups.com, Bruce Smith <smithbf@...> wrote:


On Aug 24, 2009, at 12:14 AM, SUVCWORR@... wrote:

Gene,

I answer these questions from customers all the time.? So you
should be able to ask your dealer before buying.

Rich Orr
Dealer? What dealer? I live more than 100 miles from the nearest
hobby shop that knows anything about or carries Branchline. Yes, my
local USA Hobbies will order them for me (at full price plus the 8%
local sales tax) but he doesn't give refunds based on paint schemes
or reweigh dates not being appropriate for my era. As I have noted
before, if Al Westerfield can provide an accurate timeline for each
car in an on-line web format, I'm baffled as to why others find it
apparently so difficult.

Regards
Bruce

Bruce F. Smith
Auburn, AL
http://www.vetmed.auburn.edu/index.pl/bruce_f._smith2

"Some days you are the bug, some days you are the windshield."
__
/ &#92;
__<+--+>________________&#92;__/___ ________________________________
|- ______/ O O &#92;_______ -| | __ __ __ __ __ __ __ __ |
| / 4999 PENNSYLVANIA 4999 &#92; | ||__||__||__||__||__||__||__||__||
|/_____________________________&#92;|_|________________________________|
| O--O &#92;0 0 0 0/ O--O | 0-0-0 0-0-0



------------------------------------

Yahoo! Groups Links


Re: GPEX 977 and 969 Milk reefers in freight service for Ever Sweet OJ

Dennis Storzek
 

--- In STMFC@yahoogroups.com, "riverman_vt" <riverman_vt@...> wrote:
The 8,000 gal cars were 52 ft. in length while the 6,000 gal. cars were only 40 ft. The quickest way to tell is to look at the side panels. On the 6,000 gal. cars there are three matching body panels centered in the total of seven on either side of the doors. On the 8,000 gal. cars that number increases to four matching panels out of the total of eight. If you are satisfied with the InterMountain car's
well documented shortcomings I suppose you could always get two and sacrifice one to get the needed panels or, more economically, get three and sacrifice one to get two of the needed 52 ft. length.
Didn't I just post a link to one of these cars in a museum recently? I suspect that GPEX 1021 is an 8000 gal. car, the photos show "leased to Fleischmann" stenciling, but I don't know the date or location of that service.

http://www.irm.org/cgi-bin/rsearch.cgi?freight=General+American+Pfaudler+Corp.=1021

Dennis


Re: Prototype info from model mfgs

bierglaeser <bierglaeser@...>
 

Oops! I meant to say, "I suppose for many, perhaps most, modelers the information is UNimportant."

Obviously I need another cup of coffee.

Gene Green


Re: Prototype info from model mfgs

bierglaeser <bierglaeser@...>
 

Rich,
How do you answer the question if you don't have the car in stock? The nearest decent hobby shop doesn't carry very much Branchline stock so am I to be restricted to choosing only among the items he stocks?

Bruce,
100 miles?!?! That's local. Try 275 miles to the dealer mentioned in the above paragraph.

Bruce, I agree with you. If Al can do it, they all can. There's no point in keeping that information secret. I suppose for many, perhaps most, modelers the information is important. Maybe they don't even know what it means but for a few of us, it matters.

Gene Green

--- In STMFC@yahoogroups.com, Bruce Smith <smithbf@...> wrote:


On Aug 24, 2009, at 12:14 AM, SUVCWORR@... wrote:

Gene,

I answer these questions from customers all the time.? So you
should be able to ask your dealer before buying.

Rich Orr
Dealer? What dealer? I live more than 100 miles from the nearest
hobby shop that knows anything about or carries Branchline. Yes, my
local USA Hobbies will order them for me (at full price plus the 8%
local sales tax) but he doesn't give refunds based on paint schemes
or reweigh dates not being appropriate for my era. As I have noted
before, if Al Westerfield can provide an accurate timeline for each
car in an on-line web format, I'm baffled as to why others find it
apparently so difficult.

Regards
Bruce

Bruce F. Smith
Auburn, AL
http://www.vetmed.auburn.edu/index.pl/bruce_f._smith2

"Some days you are the bug, some days you are the windshield."
__
/ &#92;
__<+--+>________________&#92;__/___ ________________________________
|- ______/ O O &#92;_______ -| | __ __ __ __ __ __ __ __ |
| / 4999 PENNSYLVANIA 4999 &#92; | ||__||__||__||__||__||__||__||__||
|/_____________________________&#92;|_|________________________________|
| O--O &#92;0 0 0 0/ O--O | 0-0-0 0-0-0


Re: GPEX 977 and 969 Milk reefers in freight service for Ever Sweet OJ

riverman_vt <riverman_vt@...>
 

--- In STMFC@yahoogroups.com, "salemoryga" <wpmccoy@...> wrote:

Don, Thanks for the info on the Hood and Whiting moves. Were these moves to Boston? I'm certain you're correct that this was OJ not concentrate. I know the IM cars have their short comings but were the 6000 and 8000 gal. cars externally the same?. Unfortiunately they seem to be the only show in town except for brass renditions of these cars. Also did these cars in addition to the juice service stenciling, get full freight car capacity and load limit data like the Ever Sweet cars did? I gather the other graphics stayed the same as is on the IM cars. Did they have their passenger service appliances removed early in their freight service or was that near the end? Was this OJ service going during the 50s' and 60s?

RE Seminole Milk, we discussed this on the Milk Car Yahoo group a couple of years back. This was apparently a short lived one car operation that was transloaded as the processor was a mile ot two from the nearest possible unloading spot at Jacksonville Terminal Station. I see Athearn/Roundhouse offered this model on one of their MDT milk reefers (wrong car unfortunately).

I would very much like to get copies of your Ever Sweet photos. Maybe you can have them scanned. We can discuss further off line. Stan Rydarowicz offers resin reefer doors so I may be able to find something to replace the incorrect door when I see him in Naperville if I can get the correct demensions. Athearn seems to have gotten the paint right on their renditions of GPEX 977 and 969. Too bad it's on such a poor model.
Hello agan Bill and all,

Yes, both the Hood and Whiting OJ shipments from Florida were direct to Boston. The processing plants of both dairies were immediately adjacent to different parts of the B&M large group of yards in the Charlestown, Cambridge and East Somerville area.
The 8,000 gal cars were 52 ft. in length while the 6,000 gal. cars were only 40 ft. The quickest way to tell is to look at the side panels. On the 6,000 gal. cars there are three matching body panels centered in the total of seven on either side of the doors. On the 8,000 gal. cars that number increases to four matching panels out of the total of eight. If you are satisfied with the InterMountain car's
well documented shortcomings I suppose you could always get two and sacrifice one to get the needed panels or, more economically, get three and sacrifice one to get two of the needed 52 ft. length. The EverSweet cars, as you noted, can be modified from Walthers cars.
Don't forget to remove the boltheads on the ends and sides from the ice bunkers of the express reefer version that Walthers did not remove when offerng the car with only a different roof for a "milk car" version.

You suggest the addition of "normal" freight car nomenclature to the EverSweet cars. This does not appear at all in the two "as shopped and repainted" photos taken for the record that I have. In the case of Whiting, while I am well aware of their having brought OJ from Florida to Boston in such cars the specific cars have never been identified. The Hood cars are another matter. Whiting gave up on their milk tank cars, both owned and leased, over a dozen years earlier than Hood, the last known user of such cars for either milk or OJ transport, Hood not ending such movements until August 1972 as best we can determine. None of the cars remaining in use at that time ever received any additional lettering other then the "Push or shove to rest" at the ends of the car sides mentioned previously. There was no lettering added to denote which cars were for OJ service and which were not either. The BOL would provide the info. As to the lack of freight car nomenclature I suspect it was not required becasue the cars were always in dedicated route service rather than free roamers.
In milk service the Hood cars were limited to operating over a maximum of eight railroads and the Whiting cars six. In OJ service I suspect it was not many more and therein is probably the reason none of the Hood or Whiting cars in OJ service are known to have acquired
standard freight car data lettering. As noted, I am unaware of such lettering being applied to either of the two EverSweet cars and would like to see photos of same if they can be found. I will see what I can do with prints for you of the two photos I have of them but would suggest you query me privately in a three weeks or so to see where I'm at with that. I'm sure nothing will occur for at least the next two. You will need Borden's GPEX 950 as well.

Take care, Don Valentine


Re: Prototype info from model mfgs

Bruce Smith
 

On Aug 24, 2009, at 12:14 AM, SUVCWORR@aol.com wrote:





Gene,

I answer these questions from customers all the time.? So you should be able to ask your dealer before buying.

Rich Orr
Dealer? What dealer? I live more than 100 miles from the nearest hobby shop that knows anything about or carries Branchline. Yes, my local USA Hobbies will order them for me (at full price plus the 8% local sales tax) but he doesn't give refunds based on paint schemes or reweigh dates not being appropriate for my era. As I have noted before, if Al Westerfield can provide an accurate timeline for each car in an on-line web format, I'm baffled as to why others find it apparently so difficult.

Regards
Bruce

Bruce F. Smith
Auburn, AL
http://www.vetmed.auburn.edu/index.pl/bruce_f._smith2

"Some days you are the bug, some days you are the windshield."
__
/ &#92;
__<+--+>________________&#92;__/___ ________________________________
|- ______/ O O &#92;_______ -| | __ __ __ __ __ __ __ __ |
| / 4999 PENNSYLVANIA 4999 &#92; | ||__||__||__||__||__||__||__||__||
|/_____________________________&#92;|_|________________________________|
| O--O &#92;0 0 0 0/ O--O | 0-0-0 0-0-0


Re: Prototype info from model mfgs

SUVCWORR@...
 

Tim,

Can and will are two different animals.? The information is on the Branchline boxes so I see no reason why any Branchline dealer should not be able to answer these questions.? Also, if asked I do open other manufacturers' boxes and provide the build and re-weigh dates if readable.? Now if I don't have the particular item in stock then I can't answer the question.

Also, to give credit where due, Atlas does list the paint dates of some but not all of their freight cars on their website but not on the box labels.

Rich Orr

-----Original Message-----
From: Tim O'Connor <timboconnor@comcast.net>
To: STMFC@yahoogroups.com
Sent: Mon, Aug 24, 2009 4:13 am
Subject: [STMFC] Re: Prototype info from model mfgs











Rich, you're joking, right? Surely you jest. You may be the
ONLY dealer who can answer those questions.

Tim O'Connor



Gene,

I answer these questions from customers all the time.? So you should be able to
ask your dealer before buying.

Rich Orr

-----Original Message-----
From: bierglaeser <bierglaeser@yahoo.com>
To: STMFC@yahoogroups.com
Sent: Sun, Aug 23, 2009 8:32 pm
Subject: [STMFC] Re: Prototype info from model mfgs

Brian and Rich,
Yes, I know the information is (and has been) on the box label. I don't think
I
worded my message as well as I might have.

In order to get the information from the box label one must be able to hold it
in one's hand. That means, for the most part, that one must either be in a
hobby shop that has the model of interest or, as in my case, have to buy the
model through the mail or internet, wait until it arrives and then see if it is
what one wants.

Having the information in advance is a benefit for those who, like me, are far,
far away from a decent hobby shop.

Gene Green


------------------------------------

Yahoo! Groups Links


Re: Prototype info from model mfgs

Tim O'Connor
 

Rich, you're joking, right? Surely you jest. You may be the
ONLY dealer who can answer those questions.

Tim O'Connor

Gene,

I answer these questions from customers all the time.? So you should be able to ask your dealer before buying.

Rich Orr

-----Original Message-----
From: bierglaeser <bierglaeser@yahoo.com>
To: STMFC@yahoogroups.com
Sent: Sun, Aug 23, 2009 8:32 pm
Subject: [STMFC] Re: Prototype info from model mfgs

Brian and Rich,
Yes, I know the information is (and has been) on the box label. I don't think I
worded my message as well as I might have.

In order to get the information from the box label one must be able to hold it
in one's hand. That means, for the most part, that one must either be in a
hobby shop that has the model of interest or, as in my case, have to buy the
model through the mail or internet, wait until it arrives and then see if it is
what one wants.

Having the information in advance is a benefit for those who, like me, are far,
far away from a decent hobby shop.

Gene Green


Re: Prototype info from model mfgs

SUVCWORR@...
 

Gene,

I answer these questions from customers all the time.? So you should be able to ask your dealer before buying.

Rich Orr

-----Original Message-----
From: bierglaeser <bierglaeser@yahoo.com>
To: STMFC@yahoogroups.com
Sent: Sun, Aug 23, 2009 8:32 pm
Subject: [STMFC] Re: Prototype info from model mfgs










Brian and Rich,
Yes, I know the information is (and has been) on the box label. I don't think I
worded my message as well as I might have.

In order to get the information from the box label one must be able to hold it
in one's hand. That means, for the most part, that one must either be in a
hobby shop that has the model of interest or, as in my case, have to buy the
model through the mail or internet, wait until it arrives and then see if it is
what one wants.

Having the information in advance is a benefit for those who, like me, are far,
far away from a decent hobby shop.

Gene Green



------------------------------------

Yahoo! Groups Links


Salt

Schuyler Larrabee
 

http://lists.railfan.net/erielackphoto.cgi?erielack-08-23-09/Scranton_Salt_600x540.jpg

Out of the list era, but this is documentation of one way salt must have been handled within the
time limits of this list.

SGL
La vita e breve, mangiate prima il dolce!







E-mail message checked by Spyware Doctor (6.0.1.441)
Database version: 6.13100
http://www.pctools.com/en/spyware-doctor-antivirus/


Re: Prototype info from model mfgs

bierglaeser <bierglaeser@...>
 

Brian and Rich,
Yes, I know the information is (and has been) on the box label. I don't think I worded my message as well as I might have.

In order to get the information from the box label one must be able to hold it in one's hand. That means, for the most part, that one must either be in a hobby shop that has the model of interest or, as in my case, have to buy the model through the mail or internet, wait until it arrives and then see if it is what one wants.

Having the information in advance is a benefit for those who, like me, are far, far away from a decent hobby shop.

Gene Green


Re: Prototype info from model mfgs

SUVCWORR@...
 

This information have always been on the Branchline Blueprint series labels.

Rich Orr

-----Original Message-----
From: bierglaeser <bierglaeser@yahoo.com>
To: STMFC@yahoogroups.com
Sent: Sun, Aug 23, 2009 5:01 pm
Subject: [STMFC] Prototype info from model mfgs










Branchline has joined the ranks of those manufacturers who provide dates built
as stenciled on their models. They are providing this information to dealers.
I don't know if it is available to consumers because I haven't visited their web
site in quite a while.

Here is what they have sent to dealers so far. Whether right or wrong, accurate
or inaccurate, prototypical or not, I applaud them for providing the
information. I am glad to have it. If Branchline has made mistakes tell them,
not me. I'm just a messenger.

Gene Green

BRANCHLINE BLUEPRINT SERIES All are HO scale.

# 1401 40' box car 6' door A&WP, Built 1947, Delivery Scheme
# 1410 40' box car 6' door ERIE Small Diamond, Built 1946, Delivery Scheme
# 1413 40' box car 6' door GM&O 2nd run w/turned wheels, Built 1947, Delivery
Scheme
# 1416 40' box car 6' door IC Box Car Red White 2nd run - new wheels, Built
1948, Delivery Scheme
# 1417 40' box car 6' door ITC, Built 1947, Delivery Scheme
# 1419 40' box car 6' door L&N, Built 1947/1952 repaint
# 1421 40' box car 6' door MP, Built 1950, Delivery Scheme
# 1427 40' box car 6' door NYC Green, Built 1949/1959 repaint
# 1438 40' box car 6' door AT&SF, Built
1945, Delivery Scheme, Class BX-44

# 1504 40' box car 8' door DT&I, Built 1950, Delivery Scheme
# 1506 40' box car 8' door IC, Built 1957, Delivery Scheme
# 1507 40' box car 8' door KCS, Built 1956, Delivery Scheme
# 1509 40' box car 8' door MP, Built 1956, Delivery Scheme
# 1512 40' box car 8' door PRR Circle Keystone, Built 1951, Delivery Scheme
# 1513 40' box car 8' door RDG, Built 1948, Delivery Scheme
# 1517 40' box car 8' door MEC Yellow Green lettering, Built 1948/ 1970 repaint
# 1520 40' box car 8'door RDG Green Yellow lettering, Built 1948/1970 repaint
# 1521 40' box car 8' door PRR Shadow Keystone, Built 1951/1956 repaint

# 1601 40' box car 7' door BCK, Built 1956, Delivery Scheme
# 1602 40' box car 7' door D&TS, Built 1948, Delivery Scheme
# 1603 40' box car 7' door ERIE Large Diamond, Built 1952, Delivery Scheme
# 1605 40' box car 7' door GTW, Built 1953, Delivery Scheme
# 1606 40' box car 7' door LV, Built 1950, Delivery Scheme
# 1607 40' box car 7' door NKP, Built 1946, Delivery Scheme
# 1608 40' box car 7' door PRR Circle Keystone, Built 1951, Delivery Scheme
# 1609 40' box car 7' door PRR Shadow Keystone, Built 1951/1957 repaint
# 1610 40' box car 7' door TP&W, Built 1951, Delivery Scheme
# 1611 40' box car 7' door WM Speed Lettering, Built 1951 Delivery Scheme
# 1612 40' box car 7' door WP, Built 1947-1952 repaint

BRANCHLINE YARDMASTER SERIES BOXCARS – SPECIAL EDITION All are HO scale.

# 9007 HO 40' box car GM&O GULF MOBILE &=2
0OHIO, Built 1942 /1960's Repaint
# 9015 HO 40' box car SP SOUTHERN PACIFIC, Built 1941 /1960's Repaint
# 9016 HO 40' box car MONON, Built 1942 / 1960's Repaint



------------------------------------

Yahoo! Groups Links









[Non-text portions of this message have been removed]


Re: Prototype info from model mfgs

Brian Carlson <brian@...>
 

Gene; They have put that information on their boxes for many years, maybe
from the beginning of the Blueprint series.

Brian J. Carlson, P.E.
Cheektowaga NY


Prototype info from model mfgs

bierglaeser <bierglaeser@...>
 

Branchline has joined the ranks of those manufacturers who provide dates built as stenciled on their models. They are providing this information to dealers. I don't know if it is available to consumers because I haven't visited their web site in quite a while.

Here is what they have sent to dealers so far. Whether right or wrong, accurate or inaccurate, prototypical or not, I applaud them for providing the information. I am glad to have it. If Branchline has made mistakes tell them, not me. I'm just a messenger.

Gene Green

BRANCHLINE BLUEPRINT SERIES All are HO scale.

# 1401 40' box car 6' door A&WP, Built 1947, Delivery Scheme
# 1410 40' box car 6' door ERIE Small Diamond, Built 1946, Delivery Scheme
# 1413 40' box car 6' door GM&O 2nd run w/turned wheels, Built 1947, Delivery Scheme
# 1416 40' box car 6' door IC Box Car Red White 2nd run - new wheels, Built 1948, Delivery Scheme
# 1417 40' box car 6' door ITC, Built 1947, Delivery Scheme
# 1419 40' box car 6' door L&N, Built 1947/1952 repaint
# 1421 40' box car 6' door MP, Built 1950, Delivery Scheme
# 1427 40' box car 6' door NYC Green, Built 1949/1959 repaint
# 1438 40' box car 6' door AT&SF, Built 1945, Delivery Scheme, Class BX-44

# 1504 40' box car 8' door DT&I, Built 1950, Delivery Scheme
# 1506 40' box car 8' door IC, Built 1957, Delivery Scheme
# 1507 40' box car 8' door KCS, Built 1956, Delivery Scheme
# 1509 40' box car 8' door MP, Built 1956, Delivery Scheme
# 1512 40' box car 8' door PRR Circle Keystone, Built 1951, Delivery Scheme
# 1513 40' box car 8' door RDG, Built 1948, Delivery Scheme
# 1517 40' box car 8' door MEC Yellow Green lettering, Built 1948/ 1970 repaint
# 1520 40' box car 8'door RDG Green Yellow lettering, Built 1948/1970 repaint
# 1521 40' box car 8' door PRR Shadow Keystone, Built 1951/1956 repaint

# 1601 40' box car 7' door BCK, Built 1956, Delivery Scheme
# 1602 40' box car 7' door D&TS, Built 1948, Delivery Scheme
# 1603 40' box car 7' door ERIE Large Diamond, Built 1952, Delivery Scheme
# 1605 40' box car 7' door GTW, Built 1953, Delivery Scheme
# 1606 40' box car 7' door LV, Built 1950, Delivery Scheme
# 1607 40' box car 7' door NKP, Built 1946, Delivery Scheme
# 1608 40' box car 7' door PRR Circle Keystone, Built 1951, Delivery Scheme
# 1609 40' box car 7' door PRR Shadow Keystone, Built 1951/1957 repaint
# 1610 40' box car 7' door TP&W, Built 1951, Delivery Scheme
# 1611 40' box car 7' door WM Speed Lettering, Built 1951 Delivery Scheme
# 1612 40' box car 7' door WP, Built 1947-1952 repaint

BRANCHLINE YARDMASTER SERIES BOXCARS – SPECIAL EDITION All are HO scale.

# 9007 HO 40' box car GM&O GULF MOBILE & OHIO, Built 1942 /1960's Repaint
# 9015 HO 40' box car SP SOUTHERN PACIFIC, Built 1941 /1960's Repaint
# 9016 HO 40' box car MONON, Built 1942 / 1960's Repaint


Re: Cutting styrene sheet into narrow strips...

spsalso
 

--- In STMFC@yahoogroups.com, VINCE PUGLIESE <gigitreosei@...> wrote:

For the record, I am fairly certain Evergreen uses waterjet technology to
produce their strip material.
I just checked the edges of some Evergreen strips from .010 to .250 and found tooth marks on all of them.

Ed

98221 - 98240 of 182515