Date   

Re: Foreign Road Stock Cars

Benjamin Hom
 

Richard Hendrickson wrote:
 http://www.godfatherrails.com/photos/pv.asp?pid=268

"Tim, you've got to pay better attention. You missed the fact that
the car just ahead of the (mostly invisible) MoPac car was a
Milwaukee Road stock car."

Tim O'Connor replied:
"If you say so Richard. I knew it wasn't PRR (or MP) but I still
can't identify it, so I'll take your word for it. :-)"

Definitely MILW.  The giveaways are the stepped "THE MILWAUKEE ROAD" to the
right of the door, and the widely spaced reporting marks.  This car can be
modeled in HO scale using the Mantua "Heavies (ex-Lindberg) stock car per John
Swanson's "Build a Milwaukee Road Stock Car" in the January 1991 issue of
Railroad Model Craftsman.

Link to photo on the pay side of the RPI website: 
http://railroad.union.rpi.edu/displayimage.php?i=21955


Ben Hom


Wine Tank Cars

Bob C <thecitrusbelt@...>
 

Below is a link to an image I found of wooden tank cars being loaded at the Winehaven facility in Richmond, CA, circa 1918. The image is from the Richmond Public Library. The image can be enlarged quite a bit without losing detail.

http://content.cdlib.org/ark:/13030/kt658025x8/

There appears to be no markings on these tank cars. Does anyone know more about them?

Thanks.

Bob Chaparro
Hemet, CA


Re: Scale Digital Caliper

Anthony Thompson <thompson@...>
 

Andy Harman wrote:
I remember being fascinated that you could read down to an HO scale 1/4" or .001" on the other scale with a Vernier.
It is indeed fascinating and also incorrect. Try multiplying or dividing (the appropriate value) by 87.

Tony Thompson Editor, Signature Press, Berkeley, CA
2906 Forest Ave., Berkeley, CA 94705 www.signaturepress.com
(510) 540-6538; fax, (510) 540-1937; e-mail, thompson@...
Publishers of books on railroad history


Re: Scale Digital Caliper

Andy Harman
 

At 09:32 PM 4/21/2011 -0000, you wrote:
Now we know how you got corrupted.
I remember being fascinated that you could read down to an HO scale 1/4" or
.001" on the other scale with a Vernier. But a dial is easier.

My PFM HO caliper maxes out at 45 feet which makes it pretty much limited
to steam era freight cars :-)

Andy


Re: Foreign Road Stock Cars

Bruce Smith
 

On Apr 21, 2011, at 4:43 PM, Tim O'Connor wrote:
Here's a nice shot showing a PRR stock train in Altoona, 1951,
with... an MP stock car!

http://www.godfatherrails.com/photos/pv.asp?pid=268
Richard replied:
Tim, you've got to pay better attention. You missed the fact that
the car just ahead of the (mostly invisible) MoPac car was a
Milwaukee Road stock car.
Indeed, and neither is a surprise on a PRR stock train. More
interesting to me is the 3rd PRR car with what appears to be a black
(car cement?) roof and door.

Regards
Bruce Smith
Auburn, AL


Re: Foreign Road Stock Cars

Tim O'Connor
 

If you say so Richard. I knew it wasn't PRR (or MP) but I still
can't identify it, so I'll take your word for it. :-)

Tim O'Connor

http://www.godfatherrails.com/photos/pv.asp?pid=268
Tim, you've got to pay better attention. You missed the fact that
the car just ahead of the (mostly invisible) MoPac car was a
Milwaukee Road stock car.

Richard Hendrickson


Re: Foreign Road Stock Cars

Richard Hendrickson
 

On Apr 21, 2011, at 4:43 PM, Tim O'Connor wrote:

Here's a nice shot showing a PRR stock train in Altoona, 1951,
with... an MP stock car!

http://www.godfatherrails.com/photos/pv.asp?pid=268
Tim, you've got to pay better attention. You missed the fact that
the car just ahead of the (mostly invisible) MoPac car was a
Milwaukee Road stock car.


Richard Hendrickson


Re: HPAX

naptownprr
 

Richard,

Do you know anything about Hunter Packing or what color the cars were (incl lettering)?

Jim

Quoting Richard Hendrickson <rhendrickson@...>:

On Apr 21, 2011, at 1:57 PM, Jeff wrote:

All;
I was scanning through the archives on this list, looking for info on
42' wood reefers. I happened along on a few posts pertaining to the
HPAX ( Hunter Packing) wood cars.
Does anyone know if decals are available for this car?
Thank you;
Jeff Sankus
Jeff, I'm not aware of any decals, but Hunter leased both its 42'
and 37' RSMs from the Mather Stock Car Co. The 37' cars were
modeled by Red Caboose, and I believe at one time they issued kits
lettered for Hunter.

Richard Hendrickson





Re: Foreign Road Stock Cars

al_brown03
 

Nice shot indeed. I probably should know this, but what's the fourth car in the train, the one between the three PRR cars and the MP car?

Al Brown, Melbourne, Fla.

--- In STMFC@..., Tim O'Connor <timboconnor@...> wrote:

Here's a nice shot showing a PRR stock train in Altoona, 1951,
with... an MP stock car!

http://www.godfatherrails.com/photos/pv.asp?pid=268

Tim O'Connor


Mather decals

Richard Townsend
 

Can anyone suggest a source for decals for dimensional data and weight data for Mather reefers? I'm looking for something that is currently available (so no Champ, Walthers, or [sniff] Westerfield). I've name and reporting marks covered, but need to fill in the rest on a couple of cars.


Richard Townsend
Lincoln City, Oregon


Re: Foreign Road Stock Cars

Tim O'Connor
 

Here's a nice shot showing a PRR stock train in Altoona, 1951,
with... an MP stock car!

http://www.godfatherrails.com/photos/pv.asp?pid=268

Tim O'Connor


Re: HPAX

Richard Hendrickson
 

On Apr 21, 2011, at 1:57 PM, Jeff wrote:

All;
I was scanning through the archives on this list, looking for info on
42' wood reefers. I happened along on a few posts pertaining to the
HPAX ( Hunter Packing) wood cars.
Does anyone know if decals are available for this car?
Thank you;
Jeff Sankus
Jeff, I'm not aware of any decals, but Hunter leased both its 42'
and 37' RSMs from the Mather Stock Car Co. The 37' cars were
modeled by Red Caboose, and I believe at one time they issued kits
lettered for Hunter.

Richard Hendrickson


Current Projects

gary laakso
 

I have 5 CB&Q/ C&S/FW&D XM-25/26 boxcars underway, 4 kits from Speedwitch and one from Sunset. Of course, 3 Great Northern 8 truss rod DS boxcars are ready for end brake gear installation and then to the paint shop. I have reduced my stash of these kits by Westerfield to only 12, LOL. Well, there could be a couple more of those kits in one of the stash areas....

gary laakso
south of Mike Brock
vasa0vasa@...

----- Original Message -----
From:
To: STMFC@...
Sent: 4/21/2011 4:24:32 PM
Subject: [STMFC] M&StL flat car with load



I just took a couple photos and put them in the photo section in a file with this email's subject title. Awaiting approval....

This is the car I was asking about the color a week or so ago.
The car is made from two Red Caboose 42' flat cars with an Evergreen scribed styrene deck.

I have documentation of this car number with a load of machinery.

I made the load similar to the gondola tarped loads in the Craftsman article, but only glued the tissue along the base edges and cut it off below the base when dry. Then I added 'boards' around the perimeter with two uprights that fit into the stake pocket openings. These hold the load on place on the car. The load can be removed for an empty move.

Clark Propst
What have you been working on?




[Non-text portions of this message have been removed]


Re: Southern Low-side Gondola Info Needed

Paul Lyons
 

John,
Yes, Ted had the first sheet of the instructions as a short prototype data sheet with a really nice photo. Do you need me to scan and send it to you?
Paul Lyons

-----Original Message-----
From: John Golden <golden1014@...>
To: stmfc@...
Sent: Thu, Apr 21, 2011 8:49 am
Subject: [STMFC] Southern Low-side Gondola Info Needed




Gentlemen,

I'm preparing an article for the SCL Modeler magazine and was wondering if
anyone has information on the Southern low-side gondolas from the 1920s--the
prototypes popularized by the Speedwitch kit. Did Speedwitch provide a
prototype data sheet for that model?

Thanks,
John

John Golden
O'Fallon, IL

2011 St. Louis RPM Meet Info:
http://icg.home.mindspring.com/rpm/stlrpm2011.htm









[Non-text portions of this message have been removed]


Re: Scale Digital Caliper

Jared Harper
 

Andy,
Now we know how you got corrupted.
Jared Harper
Athens, GA

--- In STMFC@..., "Andy Harman" <gsgondola@...> wrote:

I have one of the PFM vernier calipers that belonged to my dad, circa mid 1960s.


HPAX

Jeff Sankus
 

All;
I was scanning through the archives on this list, looking for info on
42' wood reefers. I happened along on a few posts pertaining to the HPAX ( Hunter Packing) wood cars.
Does anyone know if decals are available for this car?
Thank you;
Jeff Sankus


M&StL flat car with load

Clark Propst
 

I just took a couple photos and put them in the photo section in a file with this email's subject title. Awaiting approval....

This is the car I was asking about the color a week or so ago.
The car is made from two Red Caboose 42' flat cars with an Evergreen scribed styrene deck.

I have documentation of this car number with a load of machinery.

I made the load similar to the gondola tarped loads in the Craftsman article, but only glued the tissue along the base edges and cut it off below the base when dry. Then I added 'boards' around the perimeter with two uprights that fit into the stake pocket openings. These hold the load on place on the car. The load can be removed for an empty move.

Clark Propst
What have you been working on?


Re: Scale Digital Caliper

Anthony Thompson <thompson@...>
 

Ed Ursem wrote:
Not being an Electrical Engineer, I would think that a Digital Caliper could be calibrated to read out in half inch increments on each scale. Thus reading as 1'- 3" or 1'- 3 1/2". I believe that . 002 is 1/2" in HO and .004 is 1/2" in O, or am I wrong?
Yep, way wrong. You can calculate it, you know.

Tony Thompson Editor, Signature Press, Berkeley, CA
2906 Forest Ave., Berkeley, CA 94705 www.signaturepress.com
(510) 540-6538; fax, (510) 540-1937; e-mail, thompson@...
Publishers of books on railroad history


Re: Scale Digital Caliper

soolinehistory <destorzek@...>
 

--- In STMFC@..., "Ed" <nprybiged@...> wrote:


Not being an Electrical Engineer, I would think
that a Digital Caliper could be calibrated to
read out in half inch increments on each scale.
Thus reading as 1'- 3" or 1'- 3 1/2". I believe
that .002 is 1/2" in HO and .004 is 1/2" in O,
or am I wrong?

At any rate, I believe the calibration can be
done.

Your kidding, right? I would suggest you avail yourself of a pocket calculator before you start thinking about the programing of a measuring instrument.


Dennis


Scale Digital Caliper

Ed <nprybiged@...>
 

Not being an Electrical Engineer, I would think
that a Digital Caliper could be calibrated to
read out in half inch increments on each scale.
Thus reading as 1'- 3" or 1'- 3 1/2". I believe
that .002 is 1/2" in HO and .004 is 1/2" in O,
or am I wrong?

At any rate, I believe the calibration can be
done.

There were comments made earlier about battery
life. I noted that the Digital Calipers that
are offered by Micro Mark have an "ON - OFF"
switch, so that will prolong battery life.

Ed Ursem

96221 - 96240 of 195471