|
Re: UP box car and USRA single sheathed outside braced box car decal questions
I'm with Tim and Armand.
Recent research has found both freight (Whitings and Herlihy milk cars)and passenger (CNR First Class Coach) cars that were not regulars but certainly were very
I'm with Tim and Armand.
Recent research has found both freight (Whitings and Herlihy milk cars)and passenger (CNR First Class Coach) cars that were not regulars but certainly were very
|
By
robertm <robertmoeller47@...>
·
#113454
·
|
|
Re: Friends of the Freight Car Lunch at the Beach
Bill,
Start time?
Marty
By
Marty McGuirk
·
#113103
·
|
|
Re: Official SHIRT colors for ProtoRails 2012
This will allow them to be differentiated from the passenger car guys who will be wearing Pullman green, Milwaukee orange or stainless steel shirts(also to be worn 50yds east of the low tide mark due
This will allow them to be differentiated from the passenger car guys who will be wearing Pullman green, Milwaukee orange or stainless steel shirts(also to be worn 50yds east of the low tide mark due
|
By
james murrie
·
#113102
·
|
|
Re: UP box car and USRA single sheathed outside braced box car decal questions
Unfortunately many just run their,"favorite cars" and I tend to agree with Tim.Armand Premo
Unfortunately many just run their,"favorite cars" and I tend to agree with Tim.Armand Premo
|
By
Armand Premo
·
#113101
·
|
|
Re: UP box car and USRA single sheathed outside braced box car decal questions
David Thompson wrote:
"I like the d20 method. If you roll a 20, pull the aluminum reefer out of its
box, put it on the layout for that session, then put it back in the box at the
end of the day.
David Thompson wrote:
"I like the d20 method. If you roll a 20, pull the aluminum reefer out of its
box, put it on the layout for that session, then put it back in the box at the
end of the day.
|
By
Benjamin Hom
·
#113100
·
|
|
Re: UP box car and USRA single sheathed outside braced box car decal questions
I like the d20 method. If you roll a 20, pull the aluminum reefer out of its box, put it on the layout for that session, then put it back in the box at the end of the day. Next time you roll a 20,
I like the d20 method. If you roll a 20, pull the aluminum reefer out of its box, put it on the layout for that session, then put it back in the box at the end of the day. Next time you roll a 20,
|
By
David
·
#113099
·
|
|
Re: UPDATE SHAKE N TAKE 2013
Here's final update guys. Looks to me we are full and I will take a few
reservations for hand outs at this point.
If you think your name should be on the list for handout only drop me a
prompt
Here's final update guys. Looks to me we are full and I will take a few
reservations for hand outs at this point.
If you think your name should be on the list for handout only drop me a
prompt
|
By
Greg Martin
·
#113098
·
|
|
Official SHIRT colors for ProtoRails 2012
In order to enhance our Steam Era Freight Car modeling experience at the forthcoming ProtoRails 2013 – Cocoa Beach, the following thread from the recently defunct "Shirt Club Discussion Group" is
In order to enhance our Steam Era Freight Car modeling experience at the forthcoming ProtoRails 2013 – Cocoa Beach, the following thread from the recently defunct "Shirt Club Discussion Group" is
|
By
sctry
·
#113097
·
|
|
Re: USRA SS boxcars
i will look into ordering something like that, as it seem a primer would be in order, for me, anyway.
i should say i am thankful to frank valoczy for his work in posting such a huge amount of
i will look into ordering something like that, as it seem a primer would be in order, for me, anyway.
i should say i am thankful to frank valoczy for his work in posting such a huge amount of
|
By
Benjamin Scanlon
·
#113096
·
|
|
Re: 40'IL 8'IH 7 panel Howe Z-bar truss (aka Fowler) box cars
hullo earl
i would respond to you off list ... but i replied to your earlier email to me, earl, and it has bounced twice now. i do not know if this is a symptom of the same problem.
regards, ben
hullo earl
i would respond to you off list ... but i replied to your earlier email to me, earl, and it has bounced twice now. i do not know if this is a symptom of the same problem.
regards, ben
|
By
Benjamin Scanlon
·
#113095
·
|
|
Re: UP box car and USRA single sheathed outside braced box car decal questions
Tim O'Connor wrote:
Tim sets up a straw man here, that I am opposed to having ANY unusual cars. I didn't say that, don't believe that, and don't practice that. I strongly agree that unusual cars
Tim O'Connor wrote:
Tim sets up a straw man here, that I am opposed to having ANY unusual cars. I didn't say that, don't believe that, and don't practice that. I strongly agree that unusual cars
|
By
Anthony Thompson <thompson@...>
·
#113094
·
|
|
Re: UP box car and USRA single sheathed outside braced box car decal questions
Yeah, Tim, but if you're going to have one or two odd-ball cars on a layout, they should be OBVIOUS odd balls (e.g., helium tank, dry ice reefer, drop-center flat car, etc.) Otherwise, who knows
Yeah, Tim, but if you're going to have one or two odd-ball cars on a layout, they should be OBVIOUS odd balls (e.g., helium tank, dry ice reefer, drop-center flat car, etc.) Otherwise, who knows
|
By
Richard Hendrickson
·
#113093
·
|
|
Re: UP box car and USRA single sheathed outside braced box car decal questions
Hi Fellas,
I am having the decals created as I like to have the car correct for the box--- Tony's point is fine except I don't see any other UP decals in O that are readily available---so I may
Hi Fellas,
I am having the decals created as I like to have the car correct for the box--- Tony's point is fine except I don't see any other UP decals in O that are readily available---so I may
|
By
Brad Andonian
·
#113092
·
|
|
Re: UP box car and USRA single sheathed outside braced box car decal questions
Tony,
I subscribe to the contrary philosophy, that says if your layout contains NO unusual cars, then it's not
very representative of most railroads, since one can often spot unusual cars in photos
Tony,
I subscribe to the contrary philosophy, that says if your layout contains NO unusual cars, then it's not
very representative of most railroads, since one can often spot unusual cars in photos
|
By
Tim O'Connor
·
#113091
·
|
|
Re: UP box car and USRA single sheathed outside braced box car decal questions
Ben -
Thanks for providing the identities of the (5) demonstrator cars. I thought the UP car might have been one of them, but I did not purchase any of the PL models unless they had prototype
Ben -
Thanks for providing the identities of the (5) demonstrator cars. I thought the UP car might have been one of them, but I did not purchase any of the PL models unless they had prototype
|
By
proto48er
·
#113090
·
|
|
Re: UP box car and USRA single sheathed outside braced box car decal questions
Tony -
I fully agree with you! Only a card-carrying UP fan would want to purchase one! Pat must have had one such modeler assisting him on the project; hence the UP car. Thanks for your great
Tony -
I fully agree with you! Only a card-carrying UP fan would want to purchase one! Pat must have had one such modeler assisting him on the project; hence the UP car. Thanks for your great
|
By
proto48er
·
#113089
·
|
|
Re: USRA SS boxcars
Pieter Roos wrote:
"The "Postwar Freight Car Fleet" appears to be still available from NMRA,
although some resellers list it as out of print."
It's shown on the NMRA homepage, but it's no longer
Pieter Roos wrote:
"The "Postwar Freight Car Fleet" appears to be still available from NMRA,
although some resellers list it as out of print."
It's shown on the NMRA homepage, but it's no longer
|
By
Benjamin Hom
·
#113088
·
|
|
Re: USRA SS boxcars
Also worth mentioning are the Speedwitch Media freight car books and "The Postwar Freight Car Fleet", Larry Kline and Ted Culotta, National Model Railroad Association, Inc., Chattanooga, TN,
Also worth mentioning are the Speedwitch Media freight car books and "The Postwar Freight Car Fleet", Larry Kline and Ted Culotta, National Model Railroad Association, Inc., Chattanooga, TN,
|
By
Pieter Roos
·
#113087
·
|
|
Re: 40'IL 8'IH 7 panel Howe Z-bar truss (aka Fowler) box cars
For some reason when I submit posts via my email account, yahoo does not recognize them as a continuation of an
existing thread, which can be a detriment to future archival searches. However, when I
For some reason when I submit posts via my email account, yahoo does not recognize them as a continuation of an
existing thread, which can be a detriment to future archival searches. However, when I
|
By
Earl Tuson
·
#113086
·
|
|
Re: Fowler and fowler clone boxcar roofs
The August, 1992 issue of Mainline Modeler had Jeff Koeller's article on these cars titled "Fowler Box Car". It includes two Delano photos from 1942 and 1943, showing that at that time both styles of
The August, 1992 issue of Mainline Modeler had Jeff Koeller's article on these cars titled "Fowler Box Car". It includes two Delano photos from 1942 and 1943, showing that at that time both styles of
|
By
brianleppert@att.net
·
#113085
·
|