Notice that in the color shot, the knuckle of the visible coupler has been removed. Of course, those archbar truvks are long illegal for interchange. The brake cylinder appears to be a KD style. Back

Looking good Paul, I haven't built that one yet. It's in inventory Fenton -- Fenton Wells 250 Frye Rd Pinehurst NC 28374 910-420-8106 srrfan1401@...

Here’s a North Pacific Norwest kit I have built. Paul Doggett. England 🏴󠁧󠁢󠁥󠁮󠁧󠁿

Thanks for this and thanks too for the pointer to the Hoboken Shore Railroad, which was new to me. Dean On Sunday,

Attaching a photo I took in January 1962 of what appears to be the same tank car. Rail has been removed on both sides of car and the car is stationary. Matt Herson

I thought that I might share a little information on the design of the underframe for the wood reefers. You will find an extract of the general arrangement drawing showing the underframe and two

Norwest made resin kits and W&R imported brass models. Gary Laakso Northwest of Mike Brock

Well, it does help to be sitting in front of my computer when your request came in... Bill Daniels Santa Rosa, CA

Well, seeing as to how the rail between the car and the rest of the line has been pulled up recently (at least as of the date of the photo), it may be safe to assume that the car is in true captive

Well that was FAST! Thank you Bill! Take care Brian R. Termunde Midvale, UT

They are watertube boilers. Similar to marine boilers. They are the opposite of firetube boilers which were commonly used on steam locomotives where the combustion gasses go through the tubes and

I case these will help: http://www.steamerafreightcars.com/modeling/models/welch/np90218main.html http://www.steamerafreightcars.com/modeling/models/welch/np92313main.html There are slight variations

On one of my Milwaukee Road lists, the attached photo was shared. He was interested in the load, any ideas? Thanks! Take care Brian R. Termunde Midvale, UT

Photo: Tank Car With Full Hand Railings A 1955 photo from Riley Triggs' Port of New York

What about the crossbearers? The Accurail UF has the common arrangement where the CB tapers from 7" to 12" and the cover plate goes through a slot in the center sills. The Tichy UF has crossbearers

They all had fishbelly center sills. Aaron Gjermundson

On Sun, Nov 17, 2019 at 08:49 AM, radiodial868 wrote: Dennis, you can see the crossbearers?I can on the 90062, but not on the 93528, so maybe the later series does have shallow CB's like the

https://www.flickr.com/photos/barrigerlibrary/albums/72157649155982802/ At 10:49 AM 11/17/2019, radiodial868 wrote: Bob Webber

Dennis, you can see the crossbearers? All I can see is black! Except for the Truss Rod underframe, which also looks fun to do. The Tichy underframe is $3.39 ea, so will use those. Bob, I searched all

Thanks for the help everyone!