|
Re: My superglue spouts stick to the caps
I've used the various Zap varieties for years.
The caps never stick, but I sometimes have to ream out the spout - no big deal.
Tom E.
I've used the various Zap varieties for years.
The caps never stick, but I sometimes have to ream out the spout - no big deal.
Tom E.
|
By
Thomas Evans
·
#172762
·
|
|
Re: My superglue spouts stick to the caps
I also had a top break off the Loctite Ultra Liquid Control Glue. I found that you can unscrew the remaining top from the base and salvage some of what's left. It comes out in a puddle and the
I also had a top break off the Loctite Ultra Liquid Control Glue. I found that you can unscrew the remaining top from the base and salvage some of what's left. It comes out in a puddle and the
|
By
Stan Madyda
·
#172761
·
|
|
Re: SR 1944 AAR Boxcar -- C&BT Upgrade
That turned out very nice. Those new detail parts are a great improvement
Thanks for sharing
George Toman
That turned out very nice. Those new detail parts are a great improvement
Thanks for sharing
George Toman
|
By
gtws00
·
#172760
·
|
|
Re: My superglue spouts stick to the caps
Thanks all for good ides and ideas I'd Forgotten .
JimH
Thanks all for good ides and ideas I'd Forgotten .
JimH
|
By
Jim Hayes
·
#172759
·
|
|
Re: My superglue spouts stick to the caps
Todd is using it well as I use the same Loctite Super Glue Ultra Control with the black cap and the ultra control Loctite gel with the blue cap. I have had them get stuck and broken off several tops
Todd is using it well as I use the same Loctite Super Glue Ultra Control with the black cap and the ultra control Loctite gel with the blue cap. I have had them get stuck and broken off several tops
|
By
Lester Breuer
·
#172758
·
|
|
Re: You Can Model This Scene With Just Three Flat Cars And A Lot Of People!
There cannot be any blocking between the cradles that carry the load on the outer flatcars as the load must pivot on them.
Mark Vinski
There cannot be any blocking between the cradles that carry the load on the outer flatcars as the load must pivot on them.
Mark Vinski
|
By
Mark Vinski
·
#172757
·
|
|
Re: Still have one resin kit for sale
Nothing about the whole process has ever seemed to turn out as expected - one sharp turn
after another. Like the space - not what they said it would be, but is now possibly
Nothing about the whole process has ever seemed to turn out as expected - one sharp turn
after another. Like the space - not what they said it would be, but is now possibly
|
By
Tim O'Connor
·
#172756
·
|
|
Re: My superglue spouts stick to the caps
I highly recommend putting all superglues, when not in use, in therefrigerator. Not only do they last indefinitely when chilled, but I no longerhave problems with the nozzles sticking, etc. Les
I highly recommend putting all superglues, when not in use, in therefrigerator. Not only do they last indefinitely when chilled, but I no longerhave problems with the nozzles sticking, etc. Les
|
By
lsittler
·
#172755
·
|
|
Re: SR 1944 AAR Boxcar -- C&BT Upgrade
Bob, Very nicely done!
I have one of those CB&T kits and was planning on selling it, and may still, but now you have my imagination going!
Allen Cain
Bob, Very nicely done!
I have one of those CB&T kits and was planning on selling it, and may still, but now you have my imagination going!
Allen Cain
|
By
Allen Cain
·
#172754
·
|
|
SR 1944 AAR Boxcar -- C&BT Upgrade
Last year's new year's resolution was to build the sizeable stash of unbuilt resin kits. I put on my best Clark Propst cape and got them done (the first time I have ever accomplished a NY
Last year's new year's resolution was to build the sizeable stash of unbuilt resin kits. I put on my best Clark Propst cape and got them done (the first time I have ever accomplished a NY
|
By
Bob Chapman
·
#172753
·
|
|
Re: My superglue spouts stick to the caps
Try building more models, faster so the glue will be used up before it can age 😉
BTW I use Loctite and it rarely clogs the cap – but I won’t say “never”.
Regards and stay safe,
Andy
Try building more models, faster so the glue will be used up before it can age 😉
BTW I use Loctite and it rarely clogs the cap – but I won’t say “never”.
Regards and stay safe,
Andy
|
By
Andy Miller
·
#172752
·
|
|
Re: My superglue spouts stick to the caps
Mercury Adhesives M300M
www.mercuryadhesives.com
Plastic bottle/spout/cap has needle that keeps the spout clear
Mercury Adhesives M300M
www.mercuryadhesives.com
Plastic bottle/spout/cap has needle that keeps the spout clear
|
By
Ray Hutchison
·
#172751
·
|
|
Re: My superglue spouts stick to the caps
Hello Group,
One thing I do is right after I get a drop out . I tap the base of the bottle on a hard surface. Thanks,Barry
Hello Group,
One thing I do is right after I get a drop out . I tap the base of the bottle on a hard surface. Thanks,Barry
|
By
Barry Kenner
·
#172750
·
|
|
Re: My superglue spouts stick to the caps
Hi Jim,
Jim wrote: “Has this happened to any one else?”
Hey Jim, welcome to the club!
Jim further wrote: “Is there anything I can do to prevent this from happening again?”
I’m sure
Hi Jim,
Jim wrote: “Has this happened to any one else?”
Hey Jim, welcome to the club!
Jim further wrote: “Is there anything I can do to prevent this from happening again?”
I’m sure
|
By
Claus Schlund \(HGM\)
·
#172749
·
|
|
Re: My superglue spouts stick to the caps
Hi Jim,
I've had superglue glue caps on that took lots of effort to break off, and also superglue that set up hard in a bottle. I currently use Loctite Super Glue Ultra Liquid Control. It comes in a
Hi Jim,
I've had superglue glue caps on that took lots of effort to break off, and also superglue that set up hard in a bottle. I currently use Loctite Super Glue Ultra Liquid Control. It comes in a
|
By
Todd Sullivan
·
#172748
·
|
|
My superglue spouts stick to the caps
I'm using 2 brands of superglue currently, Scotch and Bob Smith. When I tried to use them today, both of the spouts stuck to the caps. Even pliers wouldn't pull the spouts loose, so I was left with 2
I'm using 2 brands of superglue currently, Scotch and Bob Smith. When I tried to use them today, both of the spouts stuck to the caps. Even pliers wouldn't pull the spouts loose, so I was left with 2
|
By
Jim Hayes
·
#172747
·
|
|
Re: HELP NEEDED ON A LYSLE RPM PRESENTATIONB
That IS an exciting weathering method!
Thanks for calling attention to it Bill and thanks to Mike for the URL. Many goodies for this lightly travelled easterner to download.
Dave
Monday, May 4, 2020,
That IS an exciting weathering method!
Thanks for calling attention to it Bill and thanks to Mike for the URL. Many goodies for this lightly travelled easterner to download.
Dave
Monday, May 4, 2020,
|
By
A&Y Dave in MD
·
#172746
·
|
|
ADMIN: Still have one resin kit for sale
Hi Folks,
This thread has now strayed away from the Steam-Era Freight Car that Jared is selling, and into topics about a particular club, and the treatment of particular members of that club.
As a
Hi Folks,
This thread has now strayed away from the Steam-Era Freight Car that Jared is selling, and into topics about a particular club, and the treatment of particular members of that club.
As a
|
By
Aley, Jeff A
·
#172745
·
|
|
Re: Model Railroad 10 Year Archive 201-2019
It's typical, now that Uncle Al and his friends are gone. The first ten years in PDF on an unlocked disc would suit me better; the earlier disc distribution of the archive as well. As to the on-line
It's typical, now that Uncle Al and his friends are gone. The first ten years in PDF on an unlocked disc would suit me better; the earlier disc distribution of the archive as well. As to the on-line
|
By
Nolan Hinshaw
·
#172744
·
|
|
Re: Still have one resin kit for sale
Its hard to believe they need all that space for “one resin kit” 😉
Its hard to believe they need all that space for “one resin kit” 😉
|
By
Andy Miller
·
#172743
·
|