Gary, thanks. Here is a photo of the end of one of the models and two prototype photos showing the same ends. I don't know the "proper" nomenclature, but they are "inverted". They were the limiting

WANTED: Sunshine 22.6 CB&Q XA-7/-8 1.5 door OB box car. If you have one in your stash you know you will never build, please consider selling it to me. I'm modeling WP's Quincy Junction and Quincy RR,

The Protocraft link goes to an HO set .https://www.protocraft.com/category.cfm?ItemID=1127&Categoryid=36 Mark Vinski

Nicely modelled - an unusual looking car - I like the step detail on the MOW version. Curious to know more about that roof design - interesting with the ?gussets? aligned with the carlines on the

Nice work Bill, would you share with the C&O group? You attached hi res full pictures and I thought I was looking at G scale for a minute - - nice detail execution. Chris Rooney

Tim Thanks for the photos and to the others who replied with information. Looking through a CB&Q-published 1969 Equipment List, I found that it listsMNX 1700-243 and LNX 2444-2464 as being leased to

Tony Wagner asked: "Hey guys, or girls, anyone have photos of D&H 36' box cars? Post war is preferred but any showing the various end upgrades will do nicely. Looking to do a mild upgrade of a pair of

Tony: Not sure what you feel is a "mild" upgrade. The D&H shorties can be seen with four different ends, but none of them match either of the two Accurail options (plain wood or Murphy). Also, by

No idea about the Society website, but I have some here and can sell one to you $55, postpaid. PayPal accepted. They are also available from Ron’s books, McMillan, and Amazon. J. Stephen

Well done Bill, great looking models of a car that you couldn't buy Fenton -- Fenton Wells 250 Frye Rd Pinehurst NC 28374 910-420-8106 srrfan1401@...

Hey guys, or girls, anyone have photos of D&H 36' box cars? Post war is preferred but any showing the various end upgrades will do nicely. Looking to do a mild upgrade of a pair of Accurail cars and

Nice models. They need some weathering tho. Jared Harper

Last two times I went to the Santa Fe Society webpage to buy your book, Stephen, I got the message "cannot complete your request at this time." Any suggestions? Tony Thompson tony@...

Really good looking models! What types of ends do they have? Gary Laakso Northwest of Mike Brock

Clark Propst wrote: "But, I don’t want to be one of those that uses “There’s only an ‘inferior’ model available so therefore I can’t model whatever?”. There’s also the late Stan

Bob, How about Albin Burrows article "36-Foot Harriman Standard Stock Cars" from MODEL RAILROADING for January 1989? There were also several similar articles in MODEL RAILROADING and RAILMODEL

I think I showed these once before, but maybe on the Resin list. I spent quite a few hours crawling on and under the 12k and 13k series when in MOW service as part of a project to build the 12k

Charlie, The following list was compiled when we had this discussion a number of years ago on the old group, which IIRC was orchestrated by Richard Hendrickson. You will need to consult B&O fans for

B&O from my photos: MC (many) NE EW WA (many) DU (several) BW (many) GW (several) ALEX LP KV J. Stephen Sandifer

I have all five. The Ellington book was great for 20+ years. I think you will find everything in it is in my book. Hundman’s book has lots of photos and drawings from a variety of railroads. I think