Page 33 of Freight Equipment of the NYC Volume 1 has a photo of 169074 with black roof and ends . photo 10-20-1951 Al Smith Sonora CA

If it’s on a white background, maybe it’s a placard. Eric Hansmann Murfreesboro, TN

I’m decaling the Speedwitch SP A-50-4 and plan to use it going to a lumber yard on the layout. The decals have a white backed decals for returning the empty car to Eugene. I’ve looked through

Clover House offers dry transfers in O scale https://cloverhouse.com/Cart/product_info.php?products_id=11981 They had them in HO, but are no longer listed on their website. You might contact Clover

Does anyone make decals for these cars?? Fenton -- Fenton Wells 250 Frye Rd Pinehurst NC 28374 910-420-8106 srrfan1401@...

The same mistake is in the Billboard Reefer book, but the picture is clearer. Steve Hile

your eyes are better than mine, I just enlarged that build date and it is 1928; a quick check in the earlier ORER confirms Roger Hinman

As nearly as I can tell the CRLX series 5501 – 5600 was built by GATC in 1928, this photo shows fresh paint in 1935 along with experimental rubber springs in the trucks. Steve Hile

Actually cars in that series were built by ACF, GA and Cudahy GA built 100 cars in 1935 Roger Hinman

On Aug 23, 2021, at 10:39 AM, Frank Hodina <FHodina@...> wrote: Cars in the 5501-6250 series were built by ACF. Cudahy did have some cars from GA which were in the 1501-1600 series. Frank Resin Car

Tim & others, FWIW, I tend to trust Kadee on their painting and lettering. I looked up NYC 40ft PS-1s on their website, and the 170000 and 180000 series cars, built in 1951 and 1952, respectively,

Yo Rich, I lost your e-mail address. Can you give me a shout please at Golden1014@...? Danke! John Golden Ramstein-Miesenbach, Germany

Hi Allen, I'm not sure what project you might be wanting to use a spray bottle for but a spray bottle would give you less control of the application. It is just going to go everywhere and spray heavy.

Tony I provided two photos - You are correct the Ebay photo shows a repainted car, although I have noticed that many repainted cars did not receive repainted roofs.

Allen it is 100% pure acrylic and is self-leveling. It dries quickly. I use a brush and apply to the areas receiving decals. It can also be airbrushed. I’m not sure a pump bottle spray would be

Thanks all….will get a bottle of Pledge floor gloss!! Charlie Vlk

The Army depot at Hawthorne, Nevada is still in use as is the Military's Sealift Command terminal at Port Chicago in the inland reaches of San Francisco Bay. Both are rail served. Mandatory Steam Era

Thank you very much... -- Ken Adams Still in splendid Shelter In Place solitude, about half way up Walnut Creek Owner PlasticFreightCarBuilders@groups.io

I just used the same Pledge product Eric refers to above. https://www.pledge.com/en-us/products/pledge-floor-gloss Works fine. I brush it on only the areas to be decaled. After the Micro Sol/Micro

Can this be applied with a pump bottle spray or must it be applied with an airbrush to get a good effect? -- Allen Cain Chem-Dry of Brentwood Chem-Dry of Franklin Mr. B's Chem-Dry Bluff City