Ooops. 1946 CBC. Richard Townsend Lincoln City, OR

Looking at AC&F tank car drawings in the 1947 CBC, insulation is called out as being 4" thick. That adds 8" to the diameter. The steel jacket over the insulation is called out at 1/8" adding a

Unsaid here, "Flying A" was a trademark for Tydol, the Tidewater Oil Company for its gasoline. "Veedol" was the trademark name for its motor oil. As a teen I worked at a Tydol station on Staten

Hi Phil, While I don't have diagrams for GATX 10K and8K insulated tank cars to compare, it seems entirely reasonable that there should be some dimensional differences between them, tank diameter and

There is a bulk unloading facility in Cincinnati. DOD tank cars carried JP-4 between that facility and Wright-Patterson AFB northeast of Dayton. John Mateyko

Thank you, Tony.

With all due respect, I wasn't only asking if the paint scheme was correct for the Red Caboose car, but whether it was accurate for a different tank car. I am well aware of the group search function

My friend is looking for photo or drawing of a PRR F-41 flat car underside. He has a Tichy Train Group PRR F-41 Flat Car Kit . The kit had no detail needed for underside. He would like to add the AB

Wayne, We have discussed the viable paint schemes for the Red Caboose welded tank car repeatedly on this list, with the latest iteration less than a month ago! While I realize the search function on

Depending on the era, aviation gas, gasoline, diesel, lube oil, etc... Regards, Bruce Smith Auburn, AL From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io> on behalf of Alexander Schneider Jr

Category 1. Tony Thompson

The car diagrams are compressed horizontally. Please send them uncompressed. Nelson Moyer From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io>On Behalf Of Jeffrey White Sent: Saturday,

I took out my GATX 10k (OMI 3229, painted) and 8k (OMI 3270, unpainted) insulated tank cars and found that they were the same size and length. I'm aware that varying amounts of insulation could

What would be a typical lading for a DODX tank car? (I assume the car is owned by the Department of Defense). Alex Schneider Sent from AT&T Yahoo Mail on Android

Thank you, Phil.

2. The Red Caboose tank car is only accurate for some DODX AC&F-built welded tanks. GATX had its own welded tank car designs; several of them are accurately represented by the Tangent tanks. -Phil

On Nov 27, 2021, at 11:41, Guy Wilber via groups.io <guycwilber@...> wrote: [...] > If you need copies I can scan and forward to you. If there are no incumbrances, please consider

Owen, Here are the diagram sheets for all of the IC 50 foot SS double door cars including door and a half cars from the 1954 diagram book. And

Andy wrote: “I have been searching for a source of HO scale sheet piling pieces, and having found one in Germany that produces a fantastic product, I am ready to create some mill gon loads for my

My apologies if this topic has been covered before. I've used the group search function and have searched the internet at large and I am unable to find the answer. Is the silver GATX "Flying A" paint