|
Re: Amarillo Railroad Museum FW&D Covered Hopper
Gary,
Those cars also came with the wrong roof. Most of that run with the type 3 hatches and latches had the incorrect flat panel roof instead of the Murphy standing seam roof. The only correct Q
Gary,
Those cars also came with the wrong roof. Most of that run with the type 3 hatches and latches had the incorrect flat panel roof instead of the Murphy standing seam roof. The only correct Q
|
By
Eric Mumper
·
#194198
·
|
|
Rapido 52'6" gondolas
I have three undec cars in brown. It looks like they would make NYC cars with a change from grab irons to ladders. What other cars are these close to?
Nice models, the undecs come with two kinds
I have three undec cars in brown. It looks like they would make NYC cars with a change from grab irons to ladders. What other cars are these close to?
Nice models, the undecs come with two kinds
|
By
Jeffrey White
·
#194197
·
|
|
Re: NYC S-96012
Mike Palmieri asked:
"...can you provide the link to the page this is on?"
Scroll to the bottom of the page:
https://www.canadasouthern.com/caso/NYC-MODELS-FREIGHT-PAINT.htm
Ben Hom
_._,_._,_
Mike Palmieri asked:
"...can you provide the link to the page this is on?"
Scroll to the bottom of the page:
https://www.canadasouthern.com/caso/NYC-MODELS-FREIGHT-PAINT.htm
Ben Hom
_._,_._,_
|
By
Benjamin Hom
·
#194196
·
|
|
Re: Amarillo Railroad Museum FW&D Covered Hopper
As noted, InterMountain did paint the roofs black for their CB&Q covered hoppers.
Gary Laakso
Northwest of Mike Brock
As noted, InterMountain did paint the roofs black for their CB&Q covered hoppers.
Gary Laakso
Northwest of Mike Brock
|
By
gary laakso
·
#194195
·
|
|
Re: Amarillo Railroad Museum FW&D Covered Hopper
My note of yesterday quoted Ed Hawkins on the as delivered colors from Volume 30 of the Railway Prototype Cyclopedia.
Gary Laakso
Northwest of Mike Brock
My note of yesterday quoted Ed Hawkins on the as delivered colors from Volume 30 of the Railway Prototype Cyclopedia.
Gary Laakso
Northwest of Mike Brock
|
By
gary laakso
·
#194194
·
|
|
Santa Fe Stock Car kits 42998 and 42999
If you have knowledge of InterMountain (IM) Santa Fe stock car kits 42999 or 42998, I would appreciate sharing information. The former with K brake system and latter AB brake system. The kits are
If you have knowledge of InterMountain (IM) Santa Fe stock car kits 42999 or 42998, I would appreciate sharing information. The former with K brake system and latter AB brake system. The kits are
|
By
Lester Breuer
·
#194193
·
|
|
Re: Prototype for Branchline 37-Foot Reefer?
MDC/Roundhouse. I have some
On 2022-07-19 10:36 a.m., Bob Chapman wrote:
MDC/Roundhouse. I have some
On 2022-07-19 10:36 a.m., Bob Chapman wrote:
|
By
cptracks
·
#194192
·
|
|
Re: Prototype for Branchline 37-Foot Reefer?
Yes Bob, that is the MDC kit. There were articles on bashing them into meat reefers. I'll try to find my copies and email them to you if you want them
Fenton
--
Fenton Wells
250 Frye Rd
Pinehurst
Yes Bob, that is the MDC kit. There were articles on bashing them into meat reefers. I'll try to find my copies and email them to you if you want them
Fenton
--
Fenton Wells
250 Frye Rd
Pinehurst
|
By
O Fenton Wells
·
#194191
·
|
|
Re: Prototype for Branchline 37-Foot Reefer?
Just catching up with all the responses. Appreciate the Branchline history lesson!
Per request, here are photos of the kit (I had already stripped the vintage billboard
Just catching up with all the responses. Appreciate the Branchline history lesson!
Per request, here are photos of the kit (I had already stripped the vintage billboard
|
By
Bob Chapman
·
#194190
·
|
|
Re: NYC S-96012
Robert,
Thanks, can you provide the link to the page this is on?
Mike Palmieri - Aubrey, Texas
Robert,
Thanks, can you provide the link to the page this is on?
Mike Palmieri - Aubrey, Texas
|
By
Michael Palmieri
·
#194189
·
|
|
Re: Amarillo Railroad Museum FW&D Covered Hopper
Group,
Nothing like sending without proof reading. Try this:
If it is desired to have a black roof and hopper bottoms, the painting is not hard. It is even easier if the car is put in the freezer
Group,
Nothing like sending without proof reading. Try this:
If it is desired to have a black roof and hopper bottoms, the painting is not hard. It is even easier if the car is put in the freezer
|
By
Eric Mumper
·
#194188
·
|
|
Re: Amarillo Railroad Museum FW&D Covered Hopper
Jerry,
No can do on nailing down the paint scheme on these cars. Al Hoffman is the source of the cars having black roofs and hopper bottoms in the RP Cyc 30 article. It would be nice if there was
Jerry,
No can do on nailing down the paint scheme on these cars. Al Hoffman is the source of the cars having black roofs and hopper bottoms in the RP Cyc 30 article. It would be nice if there was
|
By
Eric Mumper
·
#194187
·
|
|
Re: Caboose Stop Hobbies U tube
I was looking at the wrong time. They’re about 8 mins in.
Clark Propst
Mason City Iowa
I was looking at the wrong time. They’re about 8 mins in.
Clark Propst
Mason City Iowa
|
By
Clark Propst
·
#194186
·
|
|
Re: Amarillo Railroad Museum FW&D Covered Hopper
Hey Eric, can you point me to the source of your information about the cars originally arriving with black roofs and tops and the repainting to mineral red? I'd like to nail this down.
Jerry Michels
Hey Eric, can you point me to the source of your information about the cars originally arriving with black roofs and tops and the repainting to mineral red? I'd like to nail this down.
Jerry Michels
|
By
Jerry Michels
·
#194185
·
|
|
Re: Amarillo Railroad Museum FW&D Covered Hopper
Just to chime in on these cars. We worked closely with the BRHS and InterMountain, and the consensus was to have them in the all-mineral red scheme. If they originally had black roofs and bottoms,
Just to chime in on these cars. We worked closely with the BRHS and InterMountain, and the consensus was to have them in the all-mineral red scheme. If they originally had black roofs and bottoms,
|
By
Jerry Michels
·
#194184
·
|
|
Re: Northern Pacific Automobile Box Car NP 8029
Yes, you have it right about the beaded siding.
By "V" groove are you talking about beveled edges of the boards so that when they are
joined together there is a shallow
Yes, you have it right about the beaded siding.
By "V" groove are you talking about beveled edges of the boards so that when they are
joined together there is a shallow
|
By
Tim O'Connor
·
#194182
·
|
|
Re: Amarillo Railroad Museum FW&D Covered Hopper
Thanks
--
Charlie Duckworth
Omaha, Ne.
Thanks
--
Charlie Duckworth
Omaha, Ne.
|
By
Charlie Duckworth
·
#194181
·
|
|
Re: NYC S-96012
That came out to small. I try again as an attachment.
Robert Bogie
On 20/07/2022 12:32 am, robertb@... wrote:
That came out to small. I try again as an attachment.
Robert Bogie
On 20/07/2022 12:32 am, robertb@... wrote:
|
By
robertb@smartchat.net.au
·
#194180
·
|
|
Re: NYC S-96012
Mike,
This is the explanation from the Canada Southern website:-
Robert Bogie
On 19/07/2022 11:57 pm, Michael Palmieri wrote:
Mike,
This is the explanation from the Canada Southern website:-
Robert Bogie
On 19/07/2022 11:57 pm, Michael Palmieri wrote:
|
By
robertb@smartchat.net.au
·
#194179
·
|
|
Caboose Stop Hobbies U tube
One of their craziest shows yet, but the show their resin kits at about 20 mins in...I think?
https://www.youtube.com/watch?v=gTVVKPnNgN0&t=29s
Clark
One of their craziest shows yet, but the show their resin kits at about 20 mins in...I think?
https://www.youtube.com/watch?v=gTVVKPnNgN0&t=29s
Clark
|
By
Clark Propst
·
#194178
·
|