Hello- I have a 4-car set of the released this month (July 2022) Intermountain HO 40' PS-1 Santa Fe box cars. IMRC has 4 cars in this new release: 45403 Chief 45430 Grand Canyon 45431 El

A friend of mine used to do that for trust stencils. Unless you carry a loupe for reading the tiny letters, you'd never notice it ! :-D On 7/28/2022 4:48 PM,

A 3D yard office project is featured in the latest DesignBuildOp blog post. Dr. Dave Campbell summarizes his efforts on a key yard structure for his layout.

Because it still might not be opaque enough. I used the word "might" because I don't know. A very interesting proposal, though. That said, I like my idea better. Only one layer of one color. No

If it's hard to print yellow over white in perfect register why not print yellow over yellow? For small lettering that may not be legible in HO anyway I use N scale dimension data applied upside down

Dave, I did preface my statement with "From what I've seen,...". I am not intimately acquainted with the decal production business. I've seen the problem of yellow-over-white I describe in Microscale

The location of this photo is very likely Elmira, NY, which was home to both American LaFrance and Ward LaFrance, both makers of fire trucks. The American LaFrance plant was large and sat opposite

Dang. I think you’re correct. I was basing it on the first truck. Looked longer than 50’. Brian J. Carlson -- Brian J. Carlson, P.E. Cheektowaga NY

Actually, I think that it is too short and the roof is wrong for the X30. Rather, this appears to be an X33A. Regards, Bruce Smith Auburn, AL From: main@RealSTMFC.groups.io <main@RealSTMFC.groups.io>

PRR 1 car class X30. Brian J. Carlson -- Brian J. Carlson, P.E. Cheektowaga NY

End Door Boxcar & Fire Engine Photo courtesy of Henry Rodriguez on the Facebook Old Photos of Cars Next to Trains, Trams, and Trolleys group. Bob Chaparro Hemet, CA

Article: Modifying Central Valley Livestock Cars Link courtesy of Dean ONeill on the Groups.io Northern Pacific Railway Modelers group. Dean comments: “The article that covers changing the width

On Wed, Jul 27, 2022 at 04:39 PM, spsalso wrote: From what I've seen, it's impossible to get white fully and completely under yellow, while also not having any white creeping out the edges. And, from

From what I've seen, it's impossible to get white fully and completely under yellow, while also not having any white creeping out the edges. And, from what I've seen, it doesn't work, visually. What

Champ used to advise people to put one yellow decal on top of another, l tried this a long time ago and it worked.

If anyone has these instructions and plans, can you please scan and send me a copy. I am trying to build a reasonably accurate floor and underframe for a Trix UP A-50-16 Automobile car with the Evens

Looks like one of the replacement ZU eave roofs either rectangular panel or diagonal panel, depending on when the roof was replaced. Looks like the original door to me.

But you are not looking at the negative or the print -- You are looking at a digital scan of one of those, and anyone who has done a lot of scanning can tell you that's easily

New roof by the 50’s. Brian J. Carlson -- Brian J. Carlson, P.E. Cheektowaga NY

I can't find it either-would like one of the WP box cars Larry King lrkdbnATaol.com