Canadian Express Line online hobby shop still has a TH&B kit for sale. Originally there were gondolas, boxcars and a horse car in the

Looks like a George Taylor wood craftsman kit. They had prepainted sides with lettering.

Nicely Done Lester George Toman

I would go with the type 7 because some were built in 1909. Others were built in Oct 1911 although the AC&F photo of one of them sure looks a lot like the one from 1909. Looks like type 7 is the

Fenton wrote: "Westerfield made one. Is it resin or wood?" Look again at the photo. This is clearly a traditional wood craftsman kit, with thick grabs, stamped ladder stock, and printed lettering

Westerfield made one. Is it resin or wood?-- Fenton Wells 250 Frye Rd Pinehurst NC 28374 910-420-8106 srrfan1401@...

I found this boxcar at my local hobby shop, and was wondering if anyone could provide identification. To my knowledge, it appears to be a CPR Fowler, and it's wood based. The only identifying marks

Did you happen to notice the material for these new cars? (Don’t see it on their website) Over the years I’ve had various heavy duty flats and depressed center flats and have never had much luck

Hello all, I'd like to ask how far from home territory would trailers travel by way of tofc in the 1950's? Take C&O for example, would a trailer loaded somewhere in Virginia be sent to Colorado or

Richard, Just to clarify, you're either talking about an AC&F type 7 (1907 design) or an early type 11 (1911 design). Regards, Bruce Smith Auburn, AL

For those interested in hand brakes, I have posted to my SmugMug site several UP drawings from my collection. There are drawings from both the 1940s and 1960s. They are in the "Specialties Listings

Assuming the diameter is the same as the Type 21, it would be 92.5 inches. -Phil

I'm finishing the HO scale F&C hi-walkway 8,000 gal tank car kit. It is based on the prototype built by AC&F ca1912. I am thinking about using some spare parts and cobbling together a 10,000 gal tank

Well done. J. Stephen Sandifer

New Heavy Duty Depressed Center Flatcar At the NMRA’s National Train Show this week, ClassOneModelWorks.com announced an HO scale depressed center heavy duty flatcar. This is the General Steel

Lester Thank you for sharing Paul Doggett

I built and upgraded an Atchison, Topeka and Santa Fe (ATSF) (Santa Fe) InterMountain stock car kit. I built the Santa Fe stock car as a single deck stock car in Santa Fe class Sk-T that I numbered

Tom Is part no. 39156 what you are seeking? It appears on page 9 of the PSC catalog for passenger and freight car

Hi all, I am looking for the PSC part number for freight car air hose brackets. I am running out of these and can’t figure out what to look for! I emptied the packets years back so have no

Have four sets of injection molded gondola car sides - one long mill gon, three shorter gons - that might have come from T.C. Schmidt, not sure of prototypes, will sell for any reasonable offer,