Kurt, If you're modeling HO scale Oddballs has a decal set for the TRAX/PCX cars which had the 'standard' Armour paint scheme. Although the Trax cars had black ends and either side color or bcr or

Along with Small Parts (www.smallparts.com), a great source is Micro Fasteners (www.microfasteners.com -of course). They have almost every type of 2-56 and smaller hardware you might need. They are

I bend DA wire, often well past 90 degrees, without experiencing breakage and have never annealed it. I have found that I can even bend it several times before it does break. DA wire is usually my

Hi, To expand upon the original query. Tichy Train Group in its CMA division Offers phosphor bronze wire in .006, .008, .010, .012,.015, .020, .025 and .032 sizes. It comes in approximately eight

Small Parts service, and shipping is excellent. Try them, you wont be disappointed. Paul Imhoff lurking in Baton Rouge

There is a company called Small Parts, Inc that sell brass and other wire in various sizes through the Amazon website. Haven't tried them myself but they seem to have a large variety. Don Burn

Precision Scale also sells brass wire in straight 12 inch lengths. Size is .012 to .030 as I recall. Roger Parry uncleroger@...

In a message dated 3/2/2007 9:58:36 AM Eastern Standard Time, STMFC@... writes: The Detail Associates wire is hard. If it is bent at a tight right angle it will break. Quite

Greetings, Brass wire in spools can be found craft shops as beading wire. This is soft wire that can be straightened by stretching between two pairs of pliers. Tichey sells phosphor bronze wire in

Classification: UNCLASSIFIED Caveats: NONE Thank you, Russ! Elden _____ From: STMFC@... [mailto:STMFC@...] On Behalf Of Russ Strodtz Sent: Thursday, March 01,

Few things have been more elusive to NP modelers than the fine line of semaphore signals made by the N&G Signal Company of California in the early 80's. Though the line was once on the brink of being

Depends on the class, Dean. Classes Sk-Q, Sk-R, and Sk-S (with vertical staff brakes) were delivered with the wood-framed drover's doors, and kept them into the 21950s before they began to be

Clover House also has various sizes of brass wire, including the most common sizes used in freight car detailing. Lots of other useful stuff, as well, and Russ Clover is a good guy who runs a first

After hearing such good things, I am building the Intermountain ATSF stock car, K brake ver. I don't find it as nice of a kit as some. The sides/ends have some gaps/mismatches, and I broke the stock

STEDN? is this another relevant list? Rob Kirkham

Thanks I looked at their site and it looked like they come in short lengths of 1/2 inch or so.... In some of Ted Culotta's articles in RMC, he used long lengths to detail brake systems ......This

McMaster Carr has wire down to .02, I'm surprised they don't have anything smaller. They have screws, drills, taps, etc, and the service in my area is excellent. I use then whenever I can, not the

On Mar 1, 2007, at 3:20 PM, Denny Anspach wrote: <SNIP> > The model looks quite distinctly that it was designed for the wide > doors, and it further seems reasonable that no one would have gone

Detail Associates wire is 12 inches long, 1 foot. Chuck Hladik <BR><BR><BR>**************************************<BR> AOL now offers free email to everyone. Find out more about what's free from AOL