|
Re: Why so MUCH discussion on geography?
Mike Brock wrote
???? Mike, please explain.
Mike Brock wrote
???? Mike, please explain.
|
By
Tim O'Connor
·
#82992
·
|
|
AAR Steel Boxcar Question
Group-
I have noticed that a number of early 1937 AAR boxcars were built with lapped seams and the later cars were done with "crimped seams". I am working on a couple of SP 1937 AAR cars and there
Group-
I have noticed that a number of early 1937 AAR boxcars were built with lapped seams and the later cars were done with "crimped seams". I am working on a couple of SP 1937 AAR cars and there
|
By
losgatos48@...
·
#82991
·
|
|
Re: Why so MUCH discussion on coal car models?
And keep in mind that these "coal cars" also were used
to move gravel, limestone, sand, various ores, iron-rich
earth, sugar beets, and coke. So the wanderings of open
hoppers cannot be explained
And keep in mind that these "coal cars" also were used
to move gravel, limestone, sand, various ores, iron-rich
earth, sugar beets, and coke. So the wanderings of open
hoppers cannot be explained
|
By
Tim O'Connor
·
#82990
·
|
|
Why so MUCH discussion on coal car models? Trackside in Dulutrh...Rumored to be the MidWest
My trusty "Trackside in Duluth" shows on pages 54,68 and 69 a Northern Pacific W-3 2-8-2 hauling a train in January, 1958, the first car of which is an Erie 52'-6" drop-end gondola; on pages 78 and
My trusty "Trackside in Duluth" shows on pages 54,68 and 69 a Northern Pacific W-3 2-8-2 hauling a train in January, 1958, the first car of which is an Erie 52'-6" drop-end gondola; on pages 78 and
|
By
gary laakso
·
#82989
·
|
|
Re: Prototype for new resin kits
Yes, the cruisers and battleships were often at Hunters Point, where a large enough crane was available to lift an entire turret from the ship for repair work. The slip with that crane, and
Yes, the cruisers and battleships were often at Hunters Point, where a large enough crane was available to lift an entire turret from the ship for repair work. The slip with that crane, and
|
By
Anthony Thompson <thompson@...>
·
#82988
·
|
|
Re: Prototype for new resin kits
Tony,
Since you live in the Bay area, since you're a metals engineer (correct term?) and a freight-car historian, thought I'd take a shot in the dark -- so to speak -- and ask you about a STMFC-era
Tony,
Since you live in the Bay area, since you're a metals engineer (correct term?) and a freight-car historian, thought I'd take a shot in the dark -- so to speak -- and ask you about a STMFC-era
|
By
Brian Chapman <cornbeltroute@...>
·
#82987
·
|
|
Re: no prototype hopper
Ed Mines wrote:
"Athearns ribbed hopper!"
No for two reasons, Ed. First, I wouldn't consider this model "one of the
best hopper models out there", as Armand has characterized. Second, while
there
Ed Mines wrote:
"Athearns ribbed hopper!"
No for two reasons, Ed. First, I wouldn't consider this model "one of the
best hopper models out there", as Armand has characterized. Second, while
there
|
By
Benjamin Hom <b.hom@...>
·
#82986
·
|
|
Re: Geographic Proof and a return to frt cars please
Mike Brock wrote:
Did they include Tennessee? They did come to Memphis and I always think of Tennessee when someone starts a silly argument about where the west starts. Kinda' discredits
Mike Brock wrote:
Did they include Tennessee? They did come to Memphis and I always think of Tennessee when someone starts a silly argument about where the west starts. Kinda' discredits
|
By
Frank Greene
·
#82985
·
|
|
Re: distillate
Ed,
Butane was a popular alternative fuel for large highway trucks in the west up into the 1950s. Most brands of trucks were available with an optional butane engine. I believe Hall Scott of Berkeley
Ed,
Butane was a popular alternative fuel for large highway trucks in the west up into the 1950s. Most brands of trucks were available with an optional butane engine. I believe Hall Scott of Berkeley
|
By
Garth G. Groff <ggg9y@...>
·
#82984
·
|
|
Re: no prototype hopper
The Athearn ribbed twin is remarkably similar to a PRR H31 (no subclass),
although I do not think intended as such. The dimensions are actually pretty
close! They can be upgraded to a pretty nice
The Athearn ribbed twin is remarkably similar to a PRR H31 (no subclass),
although I do not think intended as such. The dimensions are actually pretty
close! They can be upgraded to a pretty nice
|
By
Gatwood, Elden J SAD
·
#82983
·
|
|
Re: Why so MUCH discussion on coal car models?
Jim Dick makes an interesting statement...perhaps assumed but not expressed so well before:
Snip
The key word here is, I think, "near". Going back to a rather simpler example...the N&W...Even when
Jim Dick makes an interesting statement...perhaps assumed but not expressed so well before:
Snip
The key word here is, I think, "near". Going back to a rather simpler example...the N&W...Even when
|
By
Mike Brock <brockm@...>
·
#82981
·
|
|
distillate
Distillate was a regional, petroleum derived fuel which could be used in tractors.
I watch antique tractor TV shows and every so often thet'll show a tractor which runs on distillate. My recollection
Distillate was a regional, petroleum derived fuel which could be used in tractors.
I watch antique tractor TV shows and every so often thet'll show a tractor which runs on distillate. My recollection
|
By
ed_mines
·
#82982
·
|
|
Re: Mopac hoppers away from home
Thanks Mike,
Yes I have that Burlington Bulletin, and have practically worn it out.
There are a number of interesting MP hopper photos, and even USRA gons.
Jerry
**************Looking for love
Thanks Mike,
Yes I have that Burlington Bulletin, and have practically worn it out.
There are a number of interesting MP hopper photos, and even USRA gons.
Jerry
**************Looking for love
|
By
asychis@...
·
#83011
·
|
|
Re: Why so MUCH discussion on coal car models?
At the risk of giving Richard Hendrickson carpal tunnel from repeatedly jumping for the delete button, may I continue the coal
car discussion just a bit further.
First I think Armand make a
At the risk of giving Richard Hendrickson carpal tunnel from repeatedly jumping for the delete button, may I continue the coal
car discussion just a bit further.
First I think Armand make a
|
By
np328
·
#82980
·
|
|
Re: Why so MUCH discussion on coal car models?
In a word, yes. Also, I believe, a response to the UP's "Serves All
the West," which was a bit of an exaggeraion but not much - certainly
by comparison. Both slogans began to appear on box and
In a word, yes. Also, I believe, a response to the UP's "Serves All
the West," which was a bit of an exaggeraion but not much - certainly
by comparison. Both slogans began to appear on box and
|
By
Richard Hendrickson
·
#82979
·
|
|
Re: Railroad territories and geographical divisions of the US.
Dennis Storzek wrote:
What else would one expect from New Yorkers?
FWIW, there really isn't a simple answer to EXACTLY where the west begins
but in general terms I think the best answer is somewhere
Dennis Storzek wrote:
What else would one expect from New Yorkers?
FWIW, there really isn't a simple answer to EXACTLY where the west begins
but in general terms I think the best answer is somewhere
|
By
Dave Nelson
·
#82977
·
|
|
Geographic Proof and a return to frt cars please
Now, before we terminate this very enlightening thread...who started all this anyhow?...I will now present indisputable proof that I...as usual...am correct [ wonder what I said ]. Referring to non
Now, before we terminate this very enlightening thread...who started all this anyhow?...I will now present indisputable proof that I...as usual...am correct [ wonder what I said ]. Referring to non
|
By
Mike Brock <brockm@...>
·
#82978
·
|
|
Re: Why so MUCH discussion on geography?
Andy Carlson says:
True enough. I noted several yrs ago that I could take a photo of a RR incuding the background scenery in FL, put it with ten others from states as far north as PA and you would
Andy Carlson says:
True enough. I noted several yrs ago that I could take a photo of a RR incuding the background scenery in FL, put it with ten others from states as far north as PA and you would
|
By
Mike Brock <brockm@...>
·
#82975
·
|
|
no prototype hopper
Athearns ribbed hopper!
By
ed_mines
·
#82976
·
|
|
Mopac hoppers away from home
Jerry Michels writes...I'm stunned...something about frt cars:
First, if you don't have Burlington Bulletin #35 you need to get it because it includes quite a bit of info on the other RRs serving the
Jerry Michels writes...I'm stunned...something about frt cars:
First, if you don't have Burlington Bulletin #35 you need to get it because it includes quite a bit of info on the other RRs serving the
|
By
Mike Brock <brockm@...>
·
#82974
·
|