|
Re: Fruit Growers Express FHIX 41241-41640 series reefers
Jerry:
These were built by Pacific Car & Foundry beginning in January 1957. They had the so-called "Banana Tapper" major ribs with the top rib asymetrical in shape as it was striahg along the
Jerry:
These were built by Pacific Car & Foundry beginning in January 1957. They had the so-called "Banana Tapper" major ribs with the top rib asymetrical in shape as it was striahg along the
|
By
Bill Welch
·
#98783
·
|
|
Fruit Growers Express FHIX 41241-41640 series reefers
Hi,
Can someone give me some information on the builder and construction dates
for Fruit Growers Express FHIX 41241-41640? Seems ART may have bought a
block of them.
Thanks!
Jerry Michels
Hi,
Can someone give me some information on the builder and construction dates
for Fruit Growers Express FHIX 41241-41640? Seems ART may have bought a
block of them.
Thanks!
Jerry Michels
|
By
asychis@...
·
#98782
·
|
|
Re: Georgia RR decals
Tim,
I have diagrams for A&WP and WofA, but not for Georgia. So I only have
photos to go by. Another photo of a Georgia USRA rebuild just came from
Arnold Menke. This photo taken ca. 1940 shows GA
Tim,
I have diagrams for A&WP and WofA, but not for Georgia. So I only have
photos to go by. Another photo of a Georgia USRA rebuild just came from
Arnold Menke. This photo taken ca. 1940 shows GA
|
By
Ed Hawkins
·
#98781
·
|
|
Re: Georgia Steel Rebuilds
I built one of the kits Ted put out. His info is vague on dates, saying the cars were rebuilt in the 1930s in BCR paint followed by the silver/black scheme.
Photos provided have BCR cars with reweigh
I built one of the kits Ted put out. His info is vague on dates, saying the cars were rebuilt in the 1930s in BCR paint followed by the silver/black scheme.
Photos provided have BCR cars with reweigh
|
By
Clark Propst
·
#98780
·
|
|
Re: Tk-G >Tk-J's was: speaking of SANTA FE
Tom,
Have the review and off the top of my head I think
this was the only brass made in NZ (or was it AU). As
a plastic kit (or RTR) I should think it would sell more
that the IM caboose but
Tom,
Have the review and off the top of my head I think
this was the only brass made in NZ (or was it AU). As
a plastic kit (or RTR) I should think it would sell more
that the IM caboose but
|
By
Jon Miller <atsf@...>
·
#98779
·
|
|
Re: Tk-G >Tk-J's was: speaking of SANTA FE
Jon,
More likely someday they'll be a resin kit that any other type of kit. Even at that, the underframe would be a "challenege" to say the least. Pecos River did these in brass a long time ago
Jon,
More likely someday they'll be a resin kit that any other type of kit. Even at that, the underframe would be a "challenege" to say the least. Pecos River did these in brass a long time ago
|
By
tyesac@...
·
#98778
·
|
|
Georgia Steel Rebuilds
I have a photo of Georgia 19663 from Bob's with black ladders &
background, doors and ends w/a reweigh of 6-45
Also GA 29345, another rebuilt type with Murphy paneled roof, 5
panels to each side
I have a photo of Georgia 19663 from Bob's with black ladders &
background, doors and ends w/a reweigh of 6-45
Also GA 29345, another rebuilt type with Murphy paneled roof, 5
panels to each side
|
By
Bill Welch
·
#98777
·
|
|
Re: Maine Central/North Conway hopper. Was Baltimore and Ohio hopper cars...
Dear Ben...
The only car numbers visible were the Maine Central numbers. The B&O numbers were painted over in black paint and the MEC car number was applied over this black patch, so finding the
Dear Ben...
The only car numbers visible were the Maine Central numbers. The B&O numbers were painted over in black paint and the MEC car number was applied over this black patch, so finding the
|
By
Steve Vallee
·
#98776
·
|
|
Re: Maine Central/North Conway hopper. Was Baltimore and Ohio hopper cars...
Steve Vallee wrote:
"I've gone through my files and here is what I found on the ex-B&O hoppers that
the Maine Central picked up. <<snip>>"
Steve, did you record any of the car numbers? It would be
Steve Vallee wrote:
"I've gone through my files and here is what I found on the ex-B&O hoppers that
the Maine Central picked up. <<snip>>"
Steve, did you record any of the car numbers? It would be
|
By
Benjamin Hom
·
#98775
·
|
|
GATX 25994 and Standard Tankcar Domes
I was looking at an article in the July 1988 Mainline Modeler written by Mark Feddersen about his kitbash of GATX 25994. I am interested in tackling the same project. After some comparison with a
I was looking at an article in the July 1988 Mainline Modeler written by Mark Feddersen about his kitbash of GATX 25994. I am interested in tackling the same project. After some comparison with a
|
By
SHAY STARK
·
#98774
·
|
|
Re: Georgia RR decals
Ed, I have a 1938 shot of GA 19668 (reweigh stencil 4-1938) and it
is most definitely a box car red car. When were the cars rebuilt?
Tim O'Connor
Ed, I have a 1938 shot of GA 19668 (reweigh stencil 4-1938) and it
is most definitely a box car red car. When were the cars rebuilt?
Tim O'Connor
|
By
Tim O'Connor
·
#98773
·
|
|
Re: speaking of SANTA FE
Richard,
There are flying pigs in Cincinnati (concrete ones all over the river walk
areas). Crazy looking things! :)
Cincinnati was known for its pork
Richard,
There are flying pigs in Cincinnati (concrete ones all over the river walk
areas). Crazy looking things! :)
Cincinnati was known for its pork
|
By
James Babcock
·
#98772
·
|
|
Re: M-53 ends
Tim O'Connor wrote: Thanks Bob. Offline, I got this:
375160 is an M-15P, rebuilt from M-15k in 1955
375602 is an M-15PD converted from M-15NA, rebuilt from M-15k earlier
(?)
Sheesh! Classes,
Tim O'Connor wrote: Thanks Bob. Offline, I got this:
375160 is an M-15P, rebuilt from M-15k in 1955
375602 is an M-15PD converted from M-15NA, rebuilt from M-15k earlier
(?)
Sheesh! Classes,
|
By
rwitt_2000
·
#98771
·
|
|
Maine Central/North Conway hopper. Was Baltimore and Ohio hopper cars...
Dear Group...
I've gone through my files and here is what I found on the ex-B&O hoppers that the Maine Central picked up. Almost all had heavily rusted sides:
CAR # Location
Dear Group...
I've gone through my files and here is what I found on the ex-B&O hoppers that the Maine Central picked up. Almost all had heavily rusted sides:
CAR # Location
|
By
Steve Vallee
·
#98770
·
|
|
Re: LV decals
Dear John:
I am interested in purchasing the two sets of dry transfers.
Ron Parisi
4313 Valley View Road
Harrisburg PA 17112
Please let me know payment (check or paypal....) and your info
Thanks
Dear John:
I am interested in purchasing the two sets of dry transfers.
Ron Parisi
4313 Valley View Road
Harrisburg PA 17112
Please let me know payment (check or paypal....) and your info
Thanks
|
By
ronald parisi
·
#98769
·
|
|
Re: Georgia RR decals
Bruce and Jack,
I know I'm a little late to this party, but before responding I wanted
to get some facts and figures together.
I have come across just one photo of a GA USRA steel rebuild painted
Bruce and Jack,
I know I'm a little late to this party, but before responding I wanted
to get some facts and figures together.
I have come across just one photo of a GA USRA steel rebuild painted
|
By
Ed Hawkins
·
#98768
·
|
|
Re: boxcar design evolution
sorry - I didn't express myself clearly. My thought was not that left-over USRA composite boxcars were sold to the CPR - as you say, Richard, there is no doubt the cars were built for the CPR new in
sorry - I didn't express myself clearly. My thought was not that left-over USRA composite boxcars were sold to the CPR - as you say, Richard, there is no doubt the cars were built for the CPR new in
|
By
Robert kirkham
·
#98767
·
|
|
Re: M-53 ends
Thanks Bob. Offline, I got this:
375160 is an M-15P, rebuilt from M-15k in 1955
375602 is an M-15PD converted from M-15NA, rebuilt from M-15k earlier (?)
Sheesh! Classes, subclasses, and now
Thanks Bob. Offline, I got this:
375160 is an M-15P, rebuilt from M-15k in 1955
375602 is an M-15PD converted from M-15NA, rebuilt from M-15k earlier (?)
Sheesh! Classes, subclasses, and now
|
By
Tim O'Connor
·
#98766
·
|
|
Kadee National Type B-1
just fyi -- http://www.kadee.com/html/568.jpg
I wish they'd done the 70 ton B-1, though! could use it on some
gondolas and hoppers.
Tim O'Connor
just fyi -- http://www.kadee.com/html/568.jpg
I wish they'd done the 70 ton B-1, though! could use it on some
gondolas and hoppers.
Tim O'Connor
|
By
Tim O'Connor
·
#98765
·
|
|
Re: Georgia RR decals
?? Tom, I already gave you the Tichy number for the white decals.
?? Tom, I already gave you the Tichy number for the white decals.
|
By
Tim O'Connor
·
#98764
·
|