Charlie Another great looking car Paul Doggett

Fenton The water based oils dry a little faster than the traditional oils do but will still take a few days. After they dry I airbrush a light coat of Dullcote to seal them. The NOT&M car I’m

The roof looks good, I haven't tired oils but should as the results you have are quite nice Fenton -- Fenton Wells 250 Frye Rd Pinehurst NC 28374 910-420-8106 srrfan1401@...

Been exchanging emails with Ed Hawkins on the early use of galvanized roofs and the Hutchins DryLading steel roof and one called the Universal Type Hutchins roof used 1/16” steel galvanized panels.

Hello Steam Era Modeler: We are pleased to announce that Westerfield Models is releasing an older Kit Series that has been out of production for a while and some new detail parts. The #11000 Series

oops sorry I meant that to only go to Lee... On 9/9/2022 12:38 PM, Tim O'Connor wrote: -- Tim O'Connor Sterling, Massachusetts

A few photos from the collection :-) On 9/7/2022 5:27 PM, Lee Gautreaux wrote: -- Tim O'Connor Sterling, Massachusetts

Thanks for the identification and the suggestions. Clearly the model prioritized fidelity to prototype over running qualities. If I leave the coupler box on I may impose restrictions on tight

Red Ball. I would file away the pot metal to make room for a Kadee box.

You could mount a coupler like the brass steam engine makers did on the pilots. Take a long shank Kadee coupler, cut off the wide pivot hole part, drill a small hole for a pin through the coupler

No buffers. I just applied Erie lettering from a Champ decal set. I am looking for a coupler with minimal side swing. If it doesn't center that is acceptable. A Kadee #4 is the only one I know that

Are those buffets l can see? In which case it is probably a European car. Is there a Road name, is the lettering in English, American or a foreign language?

I would appreciate help identifying this car. The side and end frames are white metal and the decks are basswood. If anyone has found a suitable coupler installation that would also be very useful. I

Looking to sell RPCYC #19 in perfect condition, $30 including shipping to you. Please email me off list. Thanks! Elliot Courtney

I looked at the Don Ball photo and sure enough, first glance, it seems half the cars are black. But closer look reveals FCR colors on them. Which reminded me, it does seem to me that red rusts to a

I have been working with some folks at the C&EI Railroad Historical Society to document their freight car fleet. I have been working on their 30' and 40' box cars and have made significant progress.

Todd Railway Prototype Cyclopedia Volume 13 may be your best best (75 pages of coverage of the rib side cars) On 9/7/2022 1:02 AM, Todd Horton via

While riding through Montana I spotted two told Milwaukee Road boxcars at a salvage business near Miles City Montana. One is an end door car 50' car. I asked Ed Hawkins about these and he is sure it's

For Sale $75 Complete Mstl852 at g mail . Com

Gents, Well, I need your help again. I'm building up a old Sunshine kit, the Frisco composite auto car, 151000-sereis car with steel doors and 3-3-3 ends. Unfortunately, the instructions don't