Have you tried Clover House or Tichy ? Armand Premo

I would suggest looking at rr.fallenflags.com, there are three pictures of the three door reefers. They have renumbered to the WFE 705 series. Lenny Ohrnell

Try Pro Custom Hobbies: http://www.procustomhobbies.com/ then click on Search and type in in the search box: DET-2524 That is one of the flat bar stock items. Click on Back to

Bill, Thanks for posting yet another informative series of photos. I find these to be very educational. Jim Kubanick Morgantown WV

The NYC Historical Society sells a set of cd’s of mechanical drawings for gondolas. The Greenville design is well covered – with one exception – the crosstie for wood floor cars is missing. It

The cover of the October 31, 1955 Railway Age has a nice 3/4 view of NP91611 showing the brake end. I don’t have the issue but have a mediocre xerox; the brake wheel appears to be Ajax, the running

Try Precision Scale. Dave Pfeiffer

Thanks, Bill. See you in Cocoa Beach! Thanks! -- Brian Ehni From: STMFC List <STMFC@...> on behalf of STMFC List <STMFC@...> Reply-To: STMFC List

Very nice Bill Paul Doggett UK Sent from Yahoo Mail on Android

Here is a Link to my Dropbox: Of Roofs, Running Boards & Sill Steps Of Roofs, Running Boards & Sill Steps Shared with Dropbox View on

Good luck finding it. Detail Associates products seem to be gradually disappearing. I suggest Ebay. Bill Welch

 Hi Ed, Detail Associates sells flat brass bar stock, theirproduct range goes even smaller than the dimension you are asking about. Forexample, in my inventory here at home I have 0.015x0.024 and

We've had a lot of discussion about handbrakes so I'll addthis to the mix. This is a link to a twenty-one minute Chicago & NorthWestern employee training film titled "Switches, Handbrakes and

Clark Propst asked: "I was gifted three 2 bay hoppers last night. An Accurail USRA, and Athearn, and something else? It’s longer than the Athearn with 9 outside posts, the center beam appears to

Anyone know where I can get small quantities flat wire, maybe .031 in wide? Ed Mines

assuming it's plastic, it sounds like a Train Miniature. I think it was based on a Pullman Standard design. Ed Mines

I was gifted three 2 bay hoppers last night. An Accurail USRA, and Athearn,and something else? It’s longer than the Athearn with 9 outside posts, thecenter beam appears to have a screw in the

Denny, I have used paint marked or “pens” for doing fussy stripes. Generally I use the side of the tip as that seems to do a much better job. The other choice is to use Bare Metal Foil which

I have on the workbench a recently acquired Northern Pacific "3 door " Resin Parts refrigerator kit by Stan Rydarowicz, series 91500 to 91999. The reefers were built in the NP Brainerd Shops in

These were the only P&LE "Greenville" clones with grabs instead of ladders. One step that makes using the P2K gon easier. Charlie Tapper OKC