I have been using plastic wrap on Model-Flex bottles with great success. I make sure the top of the bottle and threads are clean after each use. Then place a piece of plastic wrap on the bottle

I tried Saran Wrap on Floquil bottles, and they destroyed it over time. Parafilm and wax paper will partially dissolve in enamels and lacquers. If you use any of these to seal paint bottles, don’t

Saran Wrap? Thanks! Brian Ehni (Sent from my iPhone)

Parafilm M. -- Dave Parker Swall Meadows, CA

Awhile back there was a thread on re- sealing paint jars where the plastic seal was lost or broken and the result was to use some new sealing plastic (or whatever) sold for use in labs or such. This

As Eric said, they are not intentionally out of production... But, since this Covid thing struck we've been short staffed, and the ProtoHO Accumate is the victim of not being used in any of our kits.

The Accurail scale size couplers and gear boxes have been out of stock at Accurail for several months. They are my standard and my supply is getting low. I asked Dennis Storzek about the coupler

Hi folks. I was mentioning to a fellow STMFC'er today about my preferred couplers and draft gear boxes, the Accurail Protoi-Accumate couplers. He said he has been un able to to acquire any, so I did a

In answer to the original question, yes, I do know of many printed trucks that operate well. At this point in time, apart from being slightly more fragile (meaning only that you can't pry out the

Hi Nolan, yes please load a copy on files here I’ m interested too (any format is OK) Cheers Enzo Fortuna Inviato da iPhone

https://elgincarshops.blogspot.com/2021/12/in-works.html -- Pierre Oliver www.elgincarshops.com www.yarmouthmodelworks.com

Let me be the nth to say, "If the demand is great enough you *could* post it in the Files section of the group." Let me also chime in with a "Me too, please." -- Willie was a chemist, Now Willie is

Keith Thank you the decals come from the Microscale 87-911 SP wood boxcars B50-13 B50-14. Paul Doggett. England 🏴󠁧󠁢󠁥󠁮󠁧󠁿

Wonderful Paul! I like your door detail and your finish. Keith

Thank you Brian Paul Doggett

LOOKS GREAT! Thanks! -- Brian Ehni On 12/7/21, 10:21 AM, "Paul Doggett via groups.io" <main@RealSTMFC.groups.io on behalf of paul.doggett2472@...> wrote: Hi Guys

Hi Guys I have now finished the T&NO B50-15 with Allen doors, I also added the door decals to the Sunshine B50-14 I built some years ago, a photo of the door decal. Paul Doggett. England

Folks, While thinking about the flange, that attaches the steam fittings to the tank head, I checked a set of Micro Mark resin rivets. That set includes a variety of circular rivet patterns

Hi Steve, This sort of detail fits right in with one of my projects. Unfortunately, good, close-up photos of head-mounted steam fittings are hard to find. Could you share some more of your

Most likely because that's the fencing the local Co-op had in stock. Not much call for chain link fence out in the rural areas years ago, as not much use for it on the farm. Dennis Storzek