Hello- I have a sizeable collection of AccuPaints which I will be selling in the next 2 weeks, or so. This is the first offering. I have a new, in factory case box, 6 pack of AccuPaint Chinese Red

Thank you to everyone who freely gave advice on this car which is now ready for painting. Paul Doggett England 🏴󠁧󠁢󠁥󠁮󠁧󠁿

Thanks to Bill Pardie for that question, and Doug Harding for that reply. I have a bulk oil distributor to build in rural Kansas, and this is helpful information. -- Michael Gross Pasadena, CA

Many in rural small town Iowa are not fenced in or secured in any way. Here are a few photos, including two I took in Emmetsburg IA in 2009 Doug Harding www.iowacentralrr.org

Admitantly I have not seen.many prototype photos of bulk.pil distributors but the few that I have seen do not seem to be fenced in. Certainly times were different back then but what was the norm?

Modeling Project: Second Cull Lemon Load In A Gondola An article on prototype gondolas for transporting lemons was posted on the Railroad Citrus Industry Modeling Group in

In the photos that Paul Dogget posted this morning of some of Bob Smaus' great modeling I notice that there is "ON", "OFF" lettering on the fan control box. Anyone have any idea where this lettering

I use a California Air Tools compressor for everything around the house. It’s far more than adequate for airbrushing, and works well for brad nailers, etc. when used at a modest pace. It’s not up

If 60 decibels is ok for you Lowes and Menard's sell tanked compressors that meet your needs for a reasonable price. Lowes offers several 60 db units

Hey Group, I am looking to buy Speedwitch K116 Norfolk & Western G-5 Gondola Please contact me off list Thanks Rich Christie rhcdmc@...

Wow! Thanks to Jeff, Mike, Doug, Nelson, Ken, Tim, Steve and others for an informative discussion on hide cars and traffic. I did not know this where my questions on IC 50' composite autocar modeling

I have upgraded Sunshine Models Wisconsin Central (W.C.) “sawtooth” box car, numbered 135316 built last month. Upgrade was done after learning these cars had a early “high Power” hand brake

The stencil on this car states it is to be returned to Santa Fe Springs, CA. I grew up not far from the Santa Fe depot in at this location. It was a tiny structure surrounded by oil field and citrus

Wow. I've been in noisier hospital rooms than that! 😁 You could paint on the kitchen table during dinner and no one would even notice. 😂 -- Tim O'Connor Sterling,

dB rating on the Iwata Hammerhead Shark is 60 decibels. Specifications · 1/2 hp · 1.5 Gallon Tank 5.7 L · 2.15 CFM@open flow 61lpm · 84-114 PSI max. pressure · 110V or 60Hz · Overall

What we need is a Db rating for them at, say, 10 feet. Years ago I watched a custom painter doing seasonal window painting inside a Dunkin Donuts and the compressor was almost as quiet as a coffee

Members of an email discussion group recently shared many resin freight car projects. The photos and notes have been assembled into the latest Resin Car Works blog post.

Bill, i have 2 compressors, a Mr Hobby L7 and a Paasche DC600R. The L7 maxes out around 25 psi, but is very quiet. The Paasche is capable of higher pressures but is noisier - but quieter than some,

Bill I use a Iwata Hammerhead Shark https://www.madisonartshop.com/haheshaico.html Extremely quiet, same as a refrigerator. It has a ½ gallon air tank and puts out a max of 118lbs and 2.15 cfm. I

Forgot to mention I used baking soda. The 'blaster' recommendation on the box is 90 psi. Seemed to work best at that, novice speaking of course. Clark