I am getting confused here, Tim---- I do not follow the relevancy of your reference to a 1925 SP tank car. All my questions were intended to address the Pennsy's use of the Carmer on their X29

Fenton, thanks for that. Allan, I dug that out of my files, yay! Anyone know why these aren’t among the list of 1937 AAR Modified Design? Is it because of the double doors? To complicate matters,

Brian by the Way K4 makes a plethora of ACL decals.-- Fenton Wells 250 Frye Rd Pinehurst NC 28374 910-420-8106 srrfan1401@...

Brian I've had good luck with the C&BT, Front Range or McKean 40 DD cars. I get them at flea markets or eBay. I use new doors, ladders and grabs and they turn out pretty nice. Here is a B&O boxcar

Here is a diagram from the NWHS archives of the Chicago-Cleveland Climax radial roof: https://www.nwhs.org/archivesdb/detail.php?ID=3744 And here is a photo of the radial roof as applied to a N&W

Thanks gang. Steve, thanks for the awesome link! Tim, I think you are right, probably start with a 1937 modified 10’6” IH and convert to double door. What do we call these ends, 4.75 / 5 ends? I

Mike Was it just a matter of a rapid change from top-operated to the bottom-operated couplers for NEW freight cars, and then the gradual retirement (or

Fair enough. I have 348 scans of cars rebuilt in the 1950's :-) I just meant I don't think rebuilding has ever ceased. Obviously there are ups and downs. Tim

Some of those cars were rebuilt - when less than a year old - with extended height. Here are a couple of Ted's scans from Ebay. Tim O' --

Best place to start may be 10-6 car with 5/5 ends and 6 foot door like the Intermountain kit. Or even the ancient ATHEARN blue box car, which is just a tad too short for a 10-6

NYC 92075 is a member of NYC lot 693-B, one of 100 cars numbered 92000-92099 built by Dispatch Shops (East Rochester, NY) in 1941. Builders photos can be found on the New York Central Historical

ACL 51400 – 52127 built by Pullman Standard in 1941 under Lot 5641. You can see builder’s photos at pf2010.03.444a - Pullman State Historic Site - Illinois Digital Archives

It looks like an O-21 51400-52127 see Model Railoading July 97 P46 and SEFCRM P 190.. Al Smith Sonora CA

Steve, I think you have caught me. For some reason I have conflated the two names and I don't have any handy reference to further my understanding. I did however check in with my ERIE diagrams.

PM 90350-91849 had Hutchins Dry Lading peaked roofs, and 91850-92349 had Climax radial (by Chicago-Cleveland) roofs. David Thompson

Speaking of ACL, can you guys ID this car and closest model? Looks like _1675. Brian Shumaker

I thought the Chicago Cleveland radial was a round design, not peaked, while the Viking was a peaked roof. It's a different design, not just the same thing under 2 names. Steve

Nelson here is a kitbashed ACL 0-24 bashed from a P2k 50 ft SD car. I used John Golden's suggestion for the paint color. I like the look Just say'in. Photos aren't that good but it is what it is.

Ken, My 1958 ORER lists this as series 92000-92099; a 50' 6" boxcar with an IH of 10' 6", 4860 cubic-foot capacity, with a single 8' side door opening. There are no special notes or restrictions on

Oh My Goodness! I thought this sounded familiar! Ted Culotta models this car in his Volume Four of Prototype Railroad Modeling. Have at it Ken----Mike Schleigh