|
Re: Coil-Elliptic Trucks
________________________________
To: STMFC@...
Sent: Thu, December 24, 2009 9:35:30 AM
Subject: [STMFC] Re: Coil-Elliptic Trucks
Richard, the DT&I gondolas were 70 ton correct?
________________________________
To: STMFC@...
Sent: Thu, December 24, 2009 9:35:30 AM
Subject: [STMFC] Re: Coil-Elliptic Trucks
Richard, the DT&I gondolas were 70 ton correct?
|
By
acacd_ssp
·
#87358
·
|
|
Re: Build date of NP 39487?
Ahem, Richard. Fact checking is in order. Coal was burned in
locomotives in Washington state, on the NP for example. Coal
was used in the production of cement and no doubt for other
purposes as well.
Ahem, Richard. Fact checking is in order. Coal was burned in
locomotives in Washington state, on the NP for example. Coal
was used in the production of cement and no doubt for other
purposes as well.
|
By
Tim O'Connor
·
#87357
·
|
|
Re: Build date of NP 39487?
Oregon coal? Surely you jest. In the steam era, most of the
relatively little coal used in the Northwest came from southern
Utah. Nowhere in Oregon was coal mined in commercial quantities.
Oregon coal? Surely you jest. In the steam era, most of the
relatively little coal used in the Northwest came from southern
Utah. Nowhere in Oregon was coal mined in commercial quantities.
|
By
Richard Hendrickson
·
#87356
·
|
|
Re: Brake fluid warning
Actually DOT-3 brake fluid contains a hydrocarbon with a pi-bond, when it gets around strong oxidizers it will react violently. I used to use it to demonstrate chemical incompatibilities. Always read
Actually DOT-3 brake fluid contains a hydrocarbon with a pi-bond, when it gets around strong oxidizers it will react violently. I used to use it to demonstrate chemical incompatibilities. Always read
|
By
Paul Deis <pdeis@...>
·
#87355
·
|
|
Re: Build date of NP 39487?
--- In STMFC@..., Richard Hendrickson <rhendrickson@...> wrote:
<snip> should earn you a lump of coal in your Christmas
> stocking.
The N&W hoppers that went over Sherman Hill were
--- In STMFC@..., Richard Hendrickson <rhendrickson@...> wrote:
<snip> should earn you a lump of coal in your Christmas
> stocking.
The N&W hoppers that went over Sherman Hill were
|
By
al_brown03
·
#87354
·
|
|
Re: stock car cyclopedia
The other day I tried to visit the Hundman Publishing website, using a bookmark that used to work, and got a "doesn't exist" error. Has anyone contacted them lately?
Al Brown, Melbourne, Fla.
The other day I tried to visit the Hundman Publishing website, using a bookmark that used to work, and got a "doesn't exist" error. Has anyone contacted them lately?
Al Brown, Melbourne, Fla.
|
By
al_brown03
·
#87353
·
|
|
Re: Brake fluid warning
LaBelle still makes powered teflon. "Labelle 134 .30 oz. Micro-Fine Teflon Non-Staining Dry Lubricant "
Jon Miller
AT&SF
For me time stopped in 1941
Digitrax, Chief/Zephyr systems, JMRI
LaBelle still makes powered teflon. "Labelle 134 .30 oz. Micro-Fine Teflon Non-Staining Dry Lubricant "
Jon Miller
AT&SF
For me time stopped in 1941
Digitrax, Chief/Zephyr systems, JMRI
|
By
Jon Miller <atsf@...>
·
#87352
·
|
|
Re: Brake fluid warning (NOT!)
I guess I could have been more clear in intending a warning about many of the chemicals we use. I knew an artist who used a torch on a piece of painted metal only to find it was galvanized and the
I guess I could have been more clear in intending a warning about many of the chemicals we use. I knew an artist who used a torch on a piece of painted metal only to find it was galvanized and the
|
By
cj riley <cjriley42@...>
·
#87351
·
|
|
Re: Build date of NP 39487?
Wow! What a reference source!
- Claus Schlund
Wow! What a reference source!
- Claus Schlund
|
By
Claus Schlund \(HGM\)
·
#87349
·
|
|
Re: Mail order business for freight cars, etc.
Jon, I've been buying most of my model RR stuff for years - everything from AC adhesives to new brass models - from Mike Flick (Santa Fe historian and modeler) who runs the Train Station in
Jon, I've been buying most of my model RR stuff for years - everything from AC adhesives to new brass models - from Mike Flick (Santa Fe historian and modeler) who runs the Train Station in
|
By
Richard Hendrickson
·
#87348
·
|
|
Re: Build date of NP 39487?
Claus, have you looked here?
http://research.nprha.org/NP%20Box%20Cars/Forms/AllItems.aspx
Tim O'Connor
Claus, have you looked here?
http://research.nprha.org/NP%20Box%20Cars/Forms/AllItems.aspx
Tim O'Connor
|
By
Tim O'Connor
·
#87347
·
|
|
Re: Brake fluid warning (NOT!)
Exactly Bill, if you see any thing with tetrachloro- in the prefix,
run away!! Or at least handle it with synthetic gloves and a gas mask.
Brake FLUID is quite mild, not dangerous to handle (but
Exactly Bill, if you see any thing with tetrachloro- in the prefix,
run away!! Or at least handle it with synthetic gloves and a gas mask.
Brake FLUID is quite mild, not dangerous to handle (but
|
By
Tim O'Connor
·
#87346
·
|
|
Re: Brake fluid warning
Nasty stuff... although if you read the article, they are talking about brake CLEANER, not brake fluid. AFAIK, brake fluid does not contain TCE, but that doesn't mean all of our compounds and
Nasty stuff... although if you read the article, they are talking about brake CLEANER, not brake fluid. AFAIK, brake fluid does not contain TCE, but that doesn't mean all of our compounds and
|
By
Bill Daniels <billinsf@...>
·
#87345
·
|
|
Re: Brake fluid warning
CJ inserted some spaces into the URL, which make it inoperative. I've fixed those in the above citation.
Tony Thompson Editor, Signature Press, Berkeley, CA
2906 Forest Ave.,
CJ inserted some spaces into the URL, which make it inoperative. I've fixed those in the above citation.
Tony Thompson Editor, Signature Press, Berkeley, CA
2906 Forest Ave.,
|
By
Anthony Thompson <thompson@...>
·
#87344
·
|
|
Re: Build date of NP 39487?
By
Kurt Laughlin <fleeta@...>
·
#87343
·
|
|
Re: Tahoe Model Works latest HO 50T truck
All,
I will have a copies of Brian's order sheet at Cocoa Beach for those interested. Likely I will leave them with Stan (at his table) so you don't have to seek me out specifically and they don't
All,
I will have a copies of Brian's order sheet at Cocoa Beach for those interested. Likely I will leave them with Stan (at his table) so you don't have to seek me out specifically and they don't
|
By
Greg Martin
·
#87342
·
|
|
Re: Build date of NP 39487?
And a merry Christmas to you, too, Kurt. Disagreements on this list
are part of the process. Personal sniping is not. These remarks
cross the line and should earn you a lump of coal in your
And a merry Christmas to you, too, Kurt. Disagreements on this list
are part of the process. Personal sniping is not. These remarks
cross the line and should earn you a lump of coal in your
|
By
Richard Hendrickson
·
#87341
·
|
|
Re: Coil-Elliptic Trucks
True, but I ain't gonna quibble about it. Just to have an excellent
coil-elliptic truck at all is a major breakthrough.
Richard Hendrickson
True, but I ain't gonna quibble about it. Just to have an excellent
coil-elliptic truck at all is a major breakthrough.
Richard Hendrickson
|
By
Richard Hendrickson
·
#87340
·
|
|
Re: Brake fluid warning
I found this on a casting list and thought it wise to forward to a group that has talked about brake fluid as a stripper.
http://www.brewraci ngframes. com/id75. htm
Very scary info, although we
I found this on a casting list and thought it wise to forward to a group that has talked about brake fluid as a stripper.
http://www.brewraci ngframes. com/id75. htm
Very scary info, although we
|
By
cj riley <cjriley42@...>
·
#87339
·
|
|
Re: Build date of NP 39487?
Hi Gene,
Since we have such a lovely image of this freight car available on-line is there any interest on your part to scan and post the diagram on-line for those who might be interested in taking
Hi Gene,
Since we have such a lovely image of this freight car available on-line is there any interest on your part to scan and post the diagram on-line for those who might be interested in taking
|
By
Claus Schlund \(HGM\)
·
#87338
·
|