|
Re: Steam Era Freight Car Seminar in Hartford
Thanks, I live in Monroe NY and was wondering if maybe he lived close by..
WJK
Thanks, I live in Monroe NY and was wondering if maybe he lived close by..
WJK
|
By
walter kierzkowski <cathyk@...>
·
#54459
·
|
|
Re: Steam Era Freight Car Seminar in Hartford
Monroe, New York??????? WJK
Monroe, New York??????? WJK
|
By
walter kierzkowski <cathyk@...>
·
#54457
·
|
|
Re: Steam Era Freight Car Seminar in Hartford
I should have looked at the address before I sent this post, it was only
meant for Ted Culotta. Sorry.
Charles D. Shope
cshope@...
I should have looked at the address before I sent this post, it was only
meant for Ted Culotta. Sorry.
Charles D. Shope
cshope@...
|
By
cshope@...
·
#54458
·
|
|
Re: Steam Era Freight Car Seminar in Hartford
Ted
I know you have been busy but have you had a chance to finish the Binders
you were putting together for us at Hartford? Sorry I had to leave mine
with you but I had no baggage to put it in to.
Ted
I know you have been busy but have you had a chance to finish the Binders
you were putting together for us at Hartford? Sorry I had to leave mine
with you but I had no baggage to put it in to.
|
By
cshope@...
·
#54456
·
|
|
Re: Rules For Open Loads
Tim Gilbert wrote:
In the early years of the 20th century, these MCB rules were printed in the ORER.
Tony Thompson Editor, Signature Press, Berkeley, CA
2906 Forest Ave., Berkeley,
Tim Gilbert wrote:
In the early years of the 20th century, these MCB rules were printed in the ORER.
Tony Thompson Editor, Signature Press, Berkeley, CA
2906 Forest Ave., Berkeley,
|
By
Anthony Thompson <thompson@...>
·
#54455
·
|
|
Re: Accupaint/Star Paints
I have a related question regarding colors for PFE reefers. Daylight Orange for the
sides but what about ends and roof? Accupaint AP54 Rich Oxide Brown? It's hard
to compare a color chart on my
I have a related question regarding colors for PFE reefers. Daylight Orange for the
sides but what about ends and roof? Accupaint AP54 Rich Oxide Brown? It's hard
to compare a color chart on my
|
By
Robert Cheeks <Rcheeks666@...>
·
#54454
·
|
|
Re: Rules For Open Loads
Pamphlet No MD-2 AAR Rules Governing the Loading of Machinery on Open
Top Cars Effective February1,!951.for one.Armand Premo
Pamphlet No MD-2 AAR Rules Governing the Loading of Machinery on Open
Top Cars Effective February1,!951.for one.Armand Premo
|
By
armprem
·
#54452
·
|
|
Re: Rules For Open Loads
Bruce Brantner wrote:
The AAR's "Rules Governing the Loading of Commodities on Open Top Cars" was published periodically over the course of years. Each printing was slightly different including
Bruce Brantner wrote:
The AAR's "Rules Governing the Loading of Commodities on Open Top Cars" was published periodically over the course of years. Each printing was slightly different including
|
By
Tim Gilbert <tgilbert@...>
·
#54453
·
|
|
Rules For Open Loads
About a year ago there was a discussion on the rules
governing the way open loads should be handled. There
was mention of a federal (?) publication on how to
handle various open loads. Can someone
About a year ago there was a discussion on the rules
governing the way open loads should be handled. There
was mention of a federal (?) publication on how to
handle various open loads. Can someone
|
By
Bruce
·
#54451
·
|
|
Re: Speedwitch SP (not UP) Boxcars?
Paul:
These should begin shipping later this week (including yours). All of the remaining components are either in hand or in transit. They will be announced on the site this week and orders will
Paul:
These should begin shipping later this week (including yours). All of the remaining components are either in hand or in transit. They will be announced on the site this week and orders will
|
By
Ted Culotta <tculotta@...>
·
#54450
·
|
|
Re: ADMIN: STMFC Photo Policy
--- In STMFC@..., "DR Stinson" <dano@...> wrote:
<snip>
> PS - For those of you who need to add such copyright notations, you
can add
> it in most fonts by holding down the ALT key and
--- In STMFC@..., "DR Stinson" <dano@...> wrote:
<snip>
> PS - For those of you who need to add such copyright notations, you
can add
> it in most fonts by holding down the ALT key and
|
By
Walter M. Clark
·
#54449
·
|
|
Re: Burlington 50' RBBX boxcars
Brian,
I've not been able to find much detailed information about any of the
RBBX cars, however, Burlington diagrams listed them as having No. 98
trucks. Series 79000-79099 (built 1957), series
Brian,
I've not been able to find much detailed information about any of the
RBBX cars, however, Burlington diagrams listed them as having No. 98
trucks. Series 79000-79099 (built 1957), series
|
By
Ed Hawkins
·
#54444
·
|
|
Re: ADMIN: Copyright, Property Rights and the STMFC: A slightly different solution
Solomon!
--
Thanks!
Brian Ehni
Solomon!
--
Thanks!
Brian Ehni
|
By
Brian Paul Ehni <behni@...>
·
#54448
·
|
|
ADMIN: Copyright, Property Rights and the STMFC: A slightly different solution
Well, after reading various views on the subject of photo uploading into the STMFC and STMFPH file spaces, I think there is a solution that will satisfy both the need to have a viable technique for
Well, after reading various views on the subject of photo uploading into the STMFC and STMFPH file spaces, I think there is a solution that will satisfy both the need to have a viable technique for
|
By
Mike Brock <brockm@...>
·
#54447
·
|
|
Re: Fair use and the sharing of information
I do understand you on that Tony.But in this day and age of transferred
copyrights*(*example:Some MGM Movies now belong to Warner Brothers and some
Movies that The Duke made under the aegis of Batjac
I do understand you on that Tony.But in this day and age of transferred
copyrights*(*example:Some MGM Movies now belong to Warner Brothers and some
Movies that The Duke made under the aegis of Batjac
|
By
John Patterson <bongomonkey05@...>
·
#54446
·
|
|
Re: Burlington 50' RBBX boxcars
Thanks to Ed and Tim for the information. I have already built the kit, so
I'll compromise on the underframe. I forgot to ask, was the roofwalk
painted to match the roof, or unpainted?
Brian J
Thanks to Ed and Tim for the information. I have already built the kit, so
I'll compromise on the underframe. I forgot to ask, was the roofwalk
painted to match the roof, or unpainted?
Brian J
|
By
Brian J Carlson <brian@...>
·
#54445
·
|
|
Re: USSteel-roads50'gondolas
Hello Group,
The Lake Terminal 50' gondolas were thought to be dangerous by brakemen. The
corner steps or stirrups did not line up with the grab irons causing them to slip. I
haven't been
Hello Group,
The Lake Terminal 50' gondolas were thought to be dangerous by brakemen. The
corner steps or stirrups did not line up with the grab irons causing them to slip. I
haven't been
|
By
John Riba
·
#54441
·
|
|
Re: Fair use and the sharing of information
Rich Orr wrote:
You are entirely right, and many conventions do act as you propose. I much prefer the situation where tapers KNOW they have to ask first. Then they at least realize a presenter
Rich Orr wrote:
You are entirely right, and many conventions do act as you propose. I much prefer the situation where tapers KNOW they have to ask first. Then they at least realize a presenter
|
By
Anthony Thompson <thompson@...>
·
#54440
·
|
|
Re: Fair use and the sharing of information
walter kierzkowski wrote:
Your usage in talks is permitted. The copies for sale ARE NOT legal, as regards photos and rights. But if someone takes videos on the sly, you don't have an easy
walter kierzkowski wrote:
Your usage in talks is permitted. The copies for sale ARE NOT legal, as regards photos and rights. But if someone takes videos on the sly, you don't have an easy
|
By
Anthony Thompson <thompson@...>
·
#54439
·
|
|
Re: No full-proof copy protection
What this really boils down to is the respect of the law. Either you
choose to obey the law or you break it.
You know why railfans have bad reputations, some believe that anything
they want is
What this really boils down to is the respect of the law. Either you
choose to obey the law or you break it.
You know why railfans have bad reputations, some believe that anything
they want is
|
By
Peter J. McClosky <pmcclosky@...>
·
#54442
·
|