I’m trying to find a drawing of the side number panels that the MP, KO&G, ATSF, DRGW used on their FT thru F-7 diesels. Web search has lots of GA drawings but none I’ve found have the illuminated

I've used a similar technique on a resin deck, except starting with a light grey base. Weathered wood often appears grey or silverish. I used browns and tans over it, then a unifying wash of black.

Interesting method. Looks great. Seems Microscale recommends Model Master (1709) Radome Tan as a best replacement for Floquil Foundation. Q: Jason's decks are styrene, yes? Would you recommend the

Brian Carlson wrote: Well said, sir. Tony Thompson tony@...

Eric, Interesting data; thanks for sharing it. Jim Brewer

I think this is the link Bill sent in 2017 to that PDF - he created a "share" link on Dropbox. https://www.dropbox.com/sh/8y4p742064c0o1c/AAB_qJ8Z2LFmy0OYT-AN15ZPa

Some trucks are made for very short axles - .950 to 1.000. Atlas trucks, and Kato ASF A-3 come to mind. On 1/6/2021 4:22 PM, Bruce Smith wrote: -- Tim

148 of the double door single sheathed cars in series 4700 to 4997 were still in revenue service in 1965! Incredibly, 16 double door cars are in a 1972 ORER (2 years

Nelson I totally agree with all Fenton has said and of course the modelling is superb as well. Paul Doggett England 🏴󠁧󠁢󠁥󠁮󠁧󠁿

I am happy to provide Bill’s presentation on AAR and ARA boxcars. After all, he was so generous in providing it to us. Here is a link:

Been experimenting with various polyurethane clear coats to find a non/less frosty one. So far Mission Models clear coats have been the best performer in my opinion. The color coat will always get

Thanks for the insight, this at least gives me an idea of why these cars were created. I noticed also that a number of these cars were built as one lot for a number of railroads, lot 8160 -A through

Hi Ron---- I will not quell all your confusion regarding the ERIE PS-1 boxcars, 84000-84009, built nearly contemporaneous with the 490 cars in the 86500-86489 series. 40 foot cars but the ten

Wrong series, well that explains something. There are more images of these cars on the often-forgotten Fallen Flags website maintained by George Elwood.

Steve Hile pointed out to me that Bill also presented this in Collinsville July 2018. There were a couple of additions and I have uploaded this version as well available

First time posting on this subject! All of you gents have some great projects under way. Here is what I have going in my priority 10 drawere project cart. 1. Tichy Pennsy G30 WE gon. Finished

Thanks for the advice. Mine are still in the box, and I hope I can keep this in mind for the next couple of months until they have a layout to run on. Ron Merrick

Brian, Before... just got home and reamed them out. Wow! Lots of crud in those bearings! Now the 1.015" axles fit fine. Thanks for the suggestion. Regards, Bruce Smith Auburn, AL From:

Well sir you do a great job on that effort something I'm not blessed with Fenton -- Fenton Wells 250 Frye Rd Pinehurst NC 28374 910-420-8106 srrfan1401@...

Thanks George-- Fenton Wells 250 Frye Rd Pinehurst NC 28374 910-420-8106 srrfan1401@...