|
Re: Railshop H30 hopper kit
Chris
That may be, but it's far wider than the prototype. I know it's
not easy (and may not be feasible with a #78) but the whole draft
gear casting is really quite a prominent feature of the
Chris
That may be, but it's far wider than the prototype. I know it's
not easy (and may not be feasible with a #78) but the whole draft
gear casting is really quite a prominent feature of the
|
By
Tim O'Connor
·
#88009
·
|
|
Re: Railshop H30 hopper kit
Tim, the box is set up for a #78 Kadee. That is a narrow box with a Kadee #78 coupler stuck in it. If you want it more narrow, I suppose you can file the sides down some more.
Chris
Tim, the box is set up for a #78 Kadee. That is a narrow box with a Kadee #78 coupler stuck in it. If you want it more narrow, I suppose you can file the sides down some more.
Chris
|
By
modeltrainguy@...
·
#88008
·
|
|
Re: Railshop H30 hopper kit
Chris
Those ends cages are beautiful... Do you have any opinion on how
difficult it would be to replace the draft gear with Accurail or
Kadee or Details West "scale size" boxes? A kit that good
Chris
Those ends cages are beautiful... Do you have any opinion on how
difficult it would be to replace the draft gear with Accurail or
Kadee or Details West "scale size" boxes? A kit that good
|
By
Tim O'Connor
·
#88007
·
|
|
Re: Rapid prototyping - Printapart
Mark4 has successfully done work for a number of major clients and, while there were many problems with the machine initially and as an aftermath of the move to New Zealand (damage to major
Mark4 has successfully done work for a number of major clients and, while there were many problems with the machine initially and as an aftermath of the move to New Zealand (damage to major
|
By
Charlie Vlk
·
#88006
·
|
|
Railshop H30 hopper kit
I posted some pictures of the upcoming H30 hopper car from Railshop. I sold some of these kits at Cocoa Beach and these pictures may be of some help in
I posted some pictures of the upcoming H30 hopper car from Railshop. I sold some of these kits at Cocoa Beach and these pictures may be of some help in
|
By
modeltrainguy@...
·
#88005
·
|
|
Re: Rapid prototyping - Printapart
I have used Mark4Design, and the work is good, BUT....
Mark is very slow, doesn't respond to emails, machine breaks down
frequently, there's always an excuse, so my experience is that he
I have used Mark4Design, and the work is good, BUT....
Mark is very slow, doesn't respond to emails, machine breaks down
frequently, there's always an excuse, so my experience is that he
|
By
Joseph Lofland
·
#88004
·
|
|
supplemental decals for Naperville handout
In building my GM&O car from the Naperville handout, I noticed some errors in the decals and made a supplemental set as can be seen on my
In building my GM&O car from the Naperville handout, I noticed some errors in the decals and made a supplemental set as can be seen on my
|
By
jerryglow2
·
#88003
·
|
|
Re: Rapid prototyping - Printapart
Thanks, Charlie
By
Dennis Storzek
·
#88002
·
|
|
Re: Steam Freight Cars site
Paul,
If you are referring to freight cars, then you are going to have to get in line! I have first Dibs!
Tom Olsen
7 Bounary Road, West Branch
Newark, Delaware, 19711-7479
(302)
Paul,
If you are referring to freight cars, then you are going to have to get in line! I have first Dibs!
Tom Olsen
7 Bounary Road, West Branch
Newark, Delaware, 19711-7479
(302)
|
By
tmolsen@...
·
#88001
·
|
|
Re: Martin Lofton
Richard Hendrickson writes:
Richard is certainly correct that no apology is required for giving us an update on Martin Lofton's condition. Martin is, as Richard notes, a friend of many on the STMFC
Richard Hendrickson writes:
Richard is certainly correct that no apology is required for giving us an update on Martin Lofton's condition. Martin is, as Richard notes, a friend of many on the STMFC
|
By
Mike Brock <brockm@...>
·
#88000
·
|
|
Re: Martin Lofton
I echo Charlie and Richard's comments about Martin's status. Trisha and Martin have raised the standards in this hobby over the last 20 years and we are all very spoiled for it. Remember not so long
I echo Charlie and Richard's comments about Martin's status. Trisha and Martin have raised the standards in this hobby over the last 20 years and we are all very spoiled for it. Remember not so long
|
By
Craig Foster
·
#87999
·
|
|
Re: HO Decals for Southeastern Fallen Flags
Here are some images here of Supply Car decals, along with
prototype photos for comparison
http://s-clmodeler.aclsal.org/currentissue/sclm10.pdf
Tim O'Connor
Here are some images here of Supply Car decals, along with
prototype photos for comparison
http://s-clmodeler.aclsal.org/currentissue/sclm10.pdf
Tim O'Connor
|
By
Tim O'Connor
·
#87998
·
|
|
Re: Steam Freight Cars site
Sorry guys! That last post was meant for Ted Culotta, not the group. I will pay closer attention in the future.
Again I apologize for my carelessness.
Paul Lyons
Laguna Niguel, CA
Sorry guys! That last post was meant for Ted Culotta, not the group. I will pay closer attention in the future.
Again I apologize for my carelessness.
Paul Lyons
Laguna Niguel, CA
|
By
Paul Lyons
·
#87997
·
|
|
Re: Steam Freight Cars site
Ted,
Where are my "new" Toys! I am a like a kid at Xmas. I want to open the box.
Paul
Ted,
Where are my "new" Toys! I am a like a kid at Xmas. I want to open the box.
Paul
|
By
Paul Lyons
·
#87996
·
|
|
Re: Martin Lofton
Charlie, thanks for keeping us all up to date. Many of us have been
concerned but have not wanted to pester Martin and Patricia with
phone calls. I'll get a card off tomorrow. And I'm sure you
Charlie, thanks for keeping us all up to date. Many of us have been
concerned but have not wanted to pester Martin and Patricia with
phone calls. I'll get a card off tomorrow. And I'm sure you
|
By
Richard Hendrickson
·
#87995
·
|
|
2nd Try - The Seaboard-Coast Line Modeler, Vol. 3, No. 4
Gentlemen,
The latest edition of The Seaboard-Coast Line Modeler magazine, issue #10, is once again available for viewing and free download at the ACL & SAL Historical Society website at
Gentlemen,
The latest edition of The Seaboard-Coast Line Modeler magazine, issue #10, is once again available for viewing and free download at the ACL & SAL Historical Society website at
|
By
golden1014
·
#87994
·
|
|
Re: Rapid prototyping - Printapart
Dennis-
You will get excellent results if you use a service bureau that has the Prefactory Machine. The resolution is so good that N Scale wing nuts on headlights reproduce... if you can see
Dennis-
You will get excellent results if you use a service bureau that has the Prefactory Machine. The resolution is so good that N Scale wing nuts on headlights reproduce... if you can see
|
By
Charlie Vlk
·
#87993
·
|
|
Re: HO Decals for Southeastern Fallen Flags
That's not exactly what I meant... a sample is good, but without
a catalog, it's still shopping blind. I remember Campbell (shudder)
dry transfers...
Tim O'Connor
That's not exactly what I meant... a sample is good, but without
a catalog, it's still shopping blind. I remember Campbell (shudder)
dry transfers...
Tim O'Connor
|
By
Tim O'Connor
·
#87992
·
|
|
(No subject)
I just got a call from Trisha Lofton, and Martin is out of surgery and in his room and doing very well. The doctor said everything went extremely well with the surgery. They say he will be in the
I just got a call from Trisha Lofton, and Martin is out of surgery and in his room and doing very well. The doctor said everything went extremely well with the surgery. They say he will be in the
|
By
charles slater
·
#87991
·
|
|
Sunburst Refining Great Falls, MT
http://digitalgallery.nypl.org/nypldigital/dgkeysearchresult.cfm?keyword=tank+cars
Richard Wilkens
http://digitalgallery.nypl.org/nypldigital/dgkeysearchresult.cfm?keyword=tank+cars
Richard Wilkens
|
By
railsnw1 <railsnw@...>
·
#87990
·
|